legacycentral bbs

Wow, I was ready to put an order in for the stage 2 chip. I guess it wouldn't have been supported in the event of a "dead on arrival".

I guess a greddy emanage ultimate is the way to go now.

OK, I got new (to me) front seats installed! I actually installed 2 DRIVER SIDE seats! I had to mod the rear mounts on the one that is bolted into the passenger side of the car. I thought I could switch the seat rail but that is not possible. The old Legacy seat rails have a simple square and symetr...

Smoothinto2nd wrote:Does any idea know if you CAN switch the seat rails? I'm looking at picking up some 06/07 seats without seat rails and I'm hoping I can just mount them to the stock ones.

you can NOT switch the seat rails! They are way different.

ciper wrote:I dont think the 97 TCU will work because they use opposite signals from the throttle position sensor.

Do you mean it will NOT work?

crashnburn wrote:interested in the center console and carpet covering in the truck on the opening between tail lights.

I only have the console left. Condition is 6 ot of 10.

It sounds like I should first try to swap in a different TCU and see what it does. She gets the 16 blinking lights upon first startup. The FWD fuse does nothing. It shifts very nice and firm otherwise. I wish my SS shifted like that. Well, sometimes it seems to stay in a higher gear when I want to s...

So what's the scoop on this?

I am ready to get a chip if it will work with the VF39 and Jecs MAF.

jdmellor28 wrote:
from what i read the old 4eats are weak , but 95 + are bomb proof.

I heard the turbo transmissions are bullet proof.

This is the wife's car. She doesn't need the hard launch like I do. She will be turning a few less RPMs on the freeway though, and that's a good thing. We got 29.7mpg on a recent road trip, maybe we can break 30??? She will be getting VLSD with the swap, and that's a good thing too. I'll be using he...

SC, this is such a great forum for such cool cars. Most of the people that offer "help" are actually helpful. However, as good as this forum is, it is still the internet, and there will always be someone trashing on someone else. Whether the reason for this is due to sexual inadiquacies, a...

Well, the 97 Legacy GT has squareish connectors with slightly rounded corners as does the 91 SS transmission. I think I might be all set.

I did read somewhere that the Legacy changed it's transmission wiring for the 97 1/2 model year. I guess I have the earlier one...

I am going to put the turbo trans into the wife's GT. I know I need to swap the rear diff also so I will have a 3.9 front and rear. Now it is stock at 4.11. Other than just swaping the parts over, is there anything else I need to plan for? The wife will only give me the car for 2 days. She won't dri...

^how tall are ya? Other people said that the rears fit fine once you hammer on the lower tabs.? I'm 5'10". I have plenty of room because I have no padding on my arse. The back seats do fit but they need some bending on the bottom of the seat back. There are two holes in the seat frame to mount...

I got the WRX seats and I love the feel of the driver seat. It's little high but manageable.

The rear seats didn't fit worth a crap! I opted to not use them. They are now for sale. They don't fold down. I'm always hauling lumber and stuff, so I need the fold down style.

I have seats, door cards and dash cover. All in good shape except dash is a little faded.

Get this stuff out of my way so I can work on my race car! Shoot me an offer!

I will not ship the seats or dash.

Will post pix when I get everything ready.

got the hood? Gone, all I have left is: Seats, front and rear, no wrips. Door panels. dash, a little faded at windshield area. MAF and airbox top. ABS unit. Window motors. Drive shaft stock exhaust Cruise control module. center console. What color seats?? They are gray as seen in the photos on the ...

MSUlegacy wrote:got the hood?

Gone, all I have left is:

Seats, front and rear, no wrips.
Door panels.
dash, a little faded at windshield area.
MAF and airbox top.
ABS unit.
Window motors.
Drive shaft
stock exhaust
Cruise control module.
center console.

Guig'z wrote:Hello i'd need the headlights if the driver side one is like all the other ( Aka the passenger side is a diffferent plug).

WHat would be the total price ( Shipping to Quebec) ?

THanks alot

Guillaume

sorry, gone

Slow Hatch wrote:If you still have any of the following let me know via PM how much shipped to 30533

Sun visors (both)
Center rear view mirror
Radiator top brackets
Radiator overflow tank

Thanks

Sorry, all gone

kleinkid wrote:Do you have the steering wheel?

Wheel was in ugly shape, and gone. Sorry

Just about everything is sold and the shell is gone. I still have a few items left: Seats, front and rear, no wrips. Door panels. dash, a little faded at windshield area. MAF and airbox top. ABS unit. Window motors. Drive shaft stock exhaust Cruise control module. center console. there might be a fe...

adema2626 wrote:I take it that means the MAF is not for sale then.

The MAF is still available, what's you offer?

I can't wait to do the swap! My little arse slides all over when I throw it into corners. Stock fells about like a bench seat for me. blah!

that's great news!

Does anyone know if WRX front and rear seats will fit into a Legacy? I know thew door cards won't.