legacycentral bbs

nope everything is in-tacked

i was told on nasioc "sustaining high rpms the valve springs cant recover fast enough" which there was a lot of before it happened

well i know they work since both my brother and I have been running this set up for a few months now.

im just trying to figure out why i floated the exhaust valves into the pistons

they looked almost identical when I compared them side by side while installing them. and from everything I ready online they work. I wouldn't think the lift on the cams would be that much different then then Ej25d cams.

my set up that i posted above has been working great until i recently floated the valves for some reason, if it was too much boost you would think the intake valve would have hit the piston but it was the exhaust valves maybe the 04 sti valve springs i got are a little tired? i think i might order t...

http://realstreetperformance.com/store/ ... 7-909.html

any one ever use BC stuff?

so pulled my motor apart and realized my dead hole wasnt from broken ringlands again but from bent valves ej22t block ej25d heads ej20k cams ej257 valve springs ej20g rob tunned ecu small gt30 turbo running 16psi by the looks of things im getting valve float around 7000 rpm (while drifting it wont h...

do they have a higher comp but stock bore?

i need to order some pistons asap and im looking for stock size and comp ratio if possible

what are my options?
they need to be good, ive broken ring lands three times now

how did you fit it in the tunnel without cutting it up? both my room mate with a 83 2dr gl and regan who has the sti swapped 78 brat had to cut them up to fit there 6mt's

is that a 6mt?

i WILL take a post facelift scoopless hood.

the hood on my drift car is completely gutted on the bottom and its still super heavy

http://a3.sphotos.ak.fbcdn.net/hphotos-ak-ash4/390325_2631952077387_1323020060_n.jpg in this photo you can see where it was welded, and how there are no teeth like the shaft beside it so youve got to grind (lathe) the teeth off and weld it http://a5.sphotos.ak.fbcdn.net/hphotos-ak-snc7/383241_26321...

i have these injectors and i was able to get my injector guy to bump them up to a stable 520cc when he was cleaning and flow testing them

im running robs 550cc tune and i also have them in stock turbo rails

yeah, i did it a long time ago looks pretty decent imo

i have a set of jdm 92-94 fogs id sell for the right price

BUMP http://a8.sphotos.ak.fbcdn.net/hphotos-ak-ash3/543517_10151785027750346_859855345_23966828_1845569079_n.jpg http://a3.sphotos.ak.fbcdn.net/hphotos-ak-ash3/536150_10150982266901084_219706767_n.jpg FINALLY got the r200 sorted, 1st event with it the subframe folded since i cut too much and didn't ...

yeah all sticking with purple, fresh repaint tomorrow actually!

heres the 2011 year end video

https://vimeo.com/40013055

apex posted my car with my old 16x9.5 +8 front 16x9.5+13 rear i have about -5* of camber in the front and zero camber in the rear ill be running 17x9 zero front with a 245/35/17 and 17x10 +20 rear with a 215/40/17 this year http://24.media.tumblr.com/tumblr_m0pa1pYR5N1r7st00o2_1280.jpg http://25.med...

well i think its fixed, it was from my maf being too close to the turbo and straight with no bends

made a 8" long pipe with a 90* bend and it seems all good now

heres an other oddity, took the intake off the turbo and hooked it up to my TB bypassing the turbo and the problem went away

the car will run good and sound strong when i 1st fire it up, but as soon as it gets warm or i touch the gas it starts to have a hard time idling and gets SUPER rich here is everything ive changed/tried checked timing, good, installed a new belt for the hell of it, still timed good put the intake ma...

but for me keeping the turbo body harness on my turbo car i need a 92-94 turbo engine harness right?

is the harness under the intake manifold different between turbo and n/a?
and I know some years had different plugs on the end so what harness will work on my 93 turbo?

happen to have the wiring harness thats under the intake manifold for sale?