Search found 97 matches

by stef1825
Sat Feb 23, 2013 7:41 pm
Forum: Electrical
Topic: How to: install a 4 channel ECU
Replies: 49
Views: 23629

Re: How to: install a 4 channel ECU

would this also work with 1 hitachi unit (stock one) and a 1 diamond GB-003? instead of both hitachi units?
Basically; is the 22438AA030 dis4-03 ignitor interchangeable/same as the diamond J142/GB-004 (later model n/a)?
by stef1825
Sat Feb 16, 2013 5:06 pm
Forum: Parts Shed
Topic: Partout: '94 L fwd wagon
Replies: 8
Views: 1109

Re: Partout: '94 L fwd wagon

Hi, I' m converting from abs to non-abs so I'd be interested on the valve on the strut tower and maybe 2-4'' of the lines going thru it. And the passenger power window switch. Let me know if you'd be interested in taking those parts off and sending them to Canada and for how much obviously, thx!
by stef1825
Wed Mar 23, 2011 4:12 am
Forum: Parts Shed
Topic: JDM Door Stickers $25
Replies: 47
Views: 3999

Re: JDM Door Stickers $25

One black set this way!

(PM sent)
by stef1825
Sat Mar 12, 2011 12:16 am
Forum: Engine
Topic: Crank differences Jdm ej22 vs ej22t
Replies: 7
Views: 1977

Re: Crank differences Jdm ej22 vs ej22t

thx everyone, I'll keep my ej22t crank then and micropolish it!



Details of my build:

EJ22T Block
EJ22T crank
Custom CP pistons (8.5:1->EJ20G heads)
Eagle rods
Legacy EJ20G Heads


Planning on fmic, don't know what turbo and manifold to go with .... anyone have a similar setup?
by stef1825
Thu Mar 10, 2011 8:40 pm
Forum: Engine
Topic: Crank differences Jdm ej22 vs ej22t
Replies: 7
Views: 1977

Crank differences Jdm ej22 vs ej22t

Hi,
Does anyone know if a jdm ej22 crank fit in a ej22t?

I know the thrust is located on the #3 also ....

Thx
by stef1825
Thu Mar 10, 2011 6:03 am
Forum: Engine
Topic: Replacing oil pan
Replies: 3
Views: 765

Re: Replacing oil pan

Oil Pump Seal?? Can't do it from there, it's around your crankshaft, behind the timing cover, timing belt, accessory belt, crank pulley .... basically way to far to do unless you're doing a full timing belt job! but back to your oil pan gasket; you need to torque in a X pattern ... in case you didn...
by stef1825
Wed Feb 09, 2011 11:09 pm
Forum: Turbo
Topic: EJ20 Best turbo to run? TD06 or TD05?
Replies: 6
Views: 1871

Re: EJ20 Best turbo to run? TD06 or TD05?

mx4life wrote:I am looking to upgrade. Version 1 Sti ej20, what's the best turbo for it? TD06 maybe?TD05?
I'd say HTA68

here ... I'll let you read some good infos

http://forums.nasioc.com/forums/showthr ... ?t=1777309
http://www.importimageracing.com/p/Forc ... x-sti.html
by stef1825
Wed Jan 12, 2011 4:33 am
Forum: Parts Shed
Topic: Custom top mount, 600cc injectors, El boost gauge, wide band
Replies: 1
Views: 506

Re: Custom top mount, 600cc injectors, El boost gauge, wide

tad wrote: Also... 600cc flow matched injectors unused with papers $175 + shipping
Sidefeed I would guess?
Pictures?
What brand or modified stock ones?

thx!
by stef1825
Wed Aug 18, 2010 10:51 pm
Forum: Engine
Topic: EJ257 Rods on EJ22T crank
Replies: 9
Views: 1615

Re: EJ257 Rods on EJ22T crank

How about:
ej257 rods
K601M975 Wiseco Pistons
Head work
Full Set Gaskets
Rebuild kit for my Td05H-16G
550cc
Apexi piggyback (Tuned by reputable tuner + timing + blitz boost controller)
Turboback exhaust + Upipe
Sti slanted TMIC

Would that work?? aiming at 300 whp.... What do you guys think???
by stef1825
Wed Jul 21, 2010 11:49 pm
Forum: Engine
Topic: EJ257 Rods on EJ22T crank
Replies: 9
Views: 1615

Re: EJ257 Rods on EJ22T crank

douglas vincent wrote:They work fine, they are the same length. Same bearings.

It is only if you "stroke" the block by using the 2.5 crank (79mm versus 75mm) that you would need different pistons.

Thx
by stef1825
Tue Jul 20, 2010 5:32 am
Forum: Engine
Topic: EJ257 Rods on EJ22T crank
Replies: 9
Views: 1615

EJ257 Rods on EJ22T crank

Does it work?
What bearings do I use?
Do I need a custom piston?
by stef1825
Thu Feb 11, 2010 9:35 pm
Forum: Engine
Topic: Anyone modded the fuel delivery system?
Replies: 21
Views: 3841

Why do you need a parallel fuel system? Need more details. Well, I taught I had a leak on my fuel line; but turns out it's just a loose bolt on the end of my fuel rail... But, I am currently starting a build of another block I have; and will make a new fuel system; and since I'm there; I will make ...
by stef1825
Wed Feb 10, 2010 10:52 pm
Forum: Engine
Topic: Anyone modded the fuel delivery system?
Replies: 21
Views: 3841

Anyone modded the fuel delivery system?

Anyone here has upgraded to a parallel fuel system?
How did you guys do it?
Any pictures or description of how you did it?
thx!
by stef1825
Wed Feb 03, 2010 7:57 pm
Forum: Picture and Multimedia Gallery
Topic: Show and Tell: 93 TLeg Wag
Replies: 16
Views: 2209

Re: Show and Tell

brweber352 wrote: Image
What size gauges are those?
by stef1825
Fri Jan 01, 2010 4:52 am
Forum: Parts Shed
Topic: FS Stage 2 Revtronix Chip SOLD - 550 injectors + rails
Replies: 12
Views: 2015

Redlined wrote:has the chip been sold?
Just sold tonight; sorry...

I still have my 550 injectors and rails; but I don't need to sell those really; I'll use them for my next setup :!:
by stef1825
Thu Dec 31, 2009 7:54 am
Forum: Picture and Multimedia Gallery
Topic: New Here Wnated to Say Hi. 94ss
Replies: 25
Views: 2969

Re: New Here Wnated to Say Hi. 94ss

Florin1 wrote:Rays wheels
Which model? They are crazy nice!
by stef1825
Mon Dec 28, 2009 9:13 pm
Forum: Parts Shed
Topic: FS Stage 2 Revtronix Chip SOLD - 550 injectors + rails
Replies: 12
Views: 2015

Updated first post with clear prices; sorry for any confusion.
by stef1825
Mon Dec 28, 2009 4:06 pm
Forum: Parts Shed
Topic: FS Stage 2 Revtronix Chip SOLD - 550 injectors + rails
Replies: 12
Views: 2015

Well I'm still trying to patiently await the release of the Stage X chip, but that doesn't seem to be an available item any time too soon. :-( Yeah that's what I was waiting for also .... last year lol Doesn't seem to be coming in the near future.... unfortunately OK I talked to Revtronix customer ...
by stef1825
Sat Dec 26, 2009 6:57 pm
Forum: Parts Shed
Topic: FS Stage 2 Revtronix Chip SOLD - 550 injectors + rails
Replies: 12
Views: 2015

Is it possible to have Revtronix reflash it for a TD04 (WRX) with 440cc injectors? I have 550cc injectors in addition to my 440's, but they are set aside for when I pick up a VF-39 in the near future. Probably; but they would probably charge you for it.... here is their contact infos http://www.rev...
by stef1825
Fri Dec 25, 2009 4:36 pm
Forum: Parts Shed
Topic: FS Stage 2 Revtronix Chip SOLD - 550 injectors + rails
Replies: 12
Views: 2015

Bump TTT
price is OBO
by stef1825
Wed Dec 23, 2009 11:53 pm
Forum: Parts Shed
Topic: FS Stage 2 Revtronix Chip SOLD - 550 injectors + rails
Replies: 12
Views: 2015

FS Stage 2 Revtronix Chip SOLD - 550 injectors + rails

Chip is sold

Still have some almost new 550 injectors with NA rails
Asking 200 + shipping
by stef1825
Sat Dec 05, 2009 9:40 pm
Forum: Ashtray
Topic: Interesting finds on Google street view.
Replies: 22
Views: 4513

Image

Thst's right; that's my car :P
by stef1825
Sun Nov 29, 2009 12:25 am
Forum: Engine
Topic: Anyone running a high CR?
Replies: 6
Views: 1146

Come on! someone here has got to be running a compression ratio higher than stock! ....
by stef1825
Fri Nov 20, 2009 5:21 pm
Forum: Engine
Topic: Anyone running a high CR?
Replies: 6
Views: 1146

Anyone running a high CR?

Ok so here it goes; I have a spare ej22t wich I plan on rebuilding for autocross events and daily driving, I was thinking a slight higher compression ratio... Does anyone here run a higher compression ratio on their car?

please post info on you setup and how you like it!
thx !