legacycentral bbs

What about pressure sensors etc?

Willing to ship anything across the country to 23464? I'm interested in all sorts of engine parts

Intake manifold? Also any sensors and solenoid a related to the turbo?

Let me know? I'm still interested.

For now, I'm going to run it with the ej22t top end and heads and see what it does. Then, once I have enough to swap to dohc, I'll find out what the internals are. I tried using a stethoscope to look thru the spark plug hole and see the piston, but the lens was a bit too big to fit thru

Ok, I finally got around to taking the manifold off. Im pretty those are the two Pcv vent holes and it has the gussets. This looks like a turbo 25 block, no? http://uploads.tapatalk-cdn.com/20160116/c01ec8a1b64078149bfaef9ac94538a3.jpg the hoses coming from the valves covers to the tee in the middle...

I have one of the metal Wrx tanks, but the weld on the cap broke off[emoji17]

I don't think swapping the passenger side cam inside the engine bay is possible. You could just take the heads off, I have done that with the engine in the car before. I think I had to jack the engine up a bit to get the head bolts to back up far enough. I am about to send my cams to delta on Monday...

I plan on replacing all of the hoses anyway. I need to relocate the coolant tank to make room for the fxt tmic anyway, so I'll have to disconnect a couple things. Don't worry, I'll be on here asking for help if I get stuck.

Didn't get the time to pull the manifold, and honestly, I'm a little intimidated by the turbo manifold vs the na one I'm used to dealing with. Lots of things to forget the routing on. I did, however use the camera from work to sneak a peak underneath and look for those Pcv vents. I believe this is t...

Started stripping my newly acquired ej22t. Just dropped the heads off at the machine shop, getting ready to ship the cams to delta for the 220 regrind.

It appears to have both. I still haven't taken the manifold off, but peeking thru with a flashlight, I'm almost positive I see both.

Would this setup still be non-interference? It may seem like a dumb question, but my only experience with subaru engines has been with the na ej22 in my 93.

How much would shipping be for the #2 turbo and the set of injectors shipped to 23464?

The gussets you are talking about are the zig zag patterns to the left of the ej25 stamp? If so, the block has them. So that means it is a turbo 25 block of some sort? I'll pull the manifold to get a better look, I just really didn't want to take the heads off if I didn't need to.

Ordered more parts today. Subaru Warehouse Online has everything discounted to clear inventory with an additional 20% off coupon. Just saved $100 on a $400 parts order. New gaskets, seals, o-rings, studs, nuts, pumps ect. Getting closer and closer to Project Legacy hybrid by the day. Shiney new par...

Thanks Mike. I plan on running a vf40 with a tmic on the setup as is. I may replace the headgaskets and if I do, I'll take pics of the cylinder walls. I'm curious as to what internals it may have, but I didn't want to have to crack open the block. Even if it is an na ej25 variant, would I be safe ru...

So I pulled what looked to be an ej22t out of a 91 ss at a junkyard. Once I got it in my garage and began looking it over, the block is stamped ej25. The heads and turbo look to be for the 22t, but I know there was never a sohc 2.5 turbo model, so how can I tell what type of 2.5 block I have. I am w...

I'm assuming the corners are pre face lift? I maybe interested in the heads. I'm waiting on robertpaige to tell me if he's giving up his or not, if he keeps his I'll take them shipped to 23464, just let me know what the damage would be shipping

I'm interested in the group n tops and the 96 99 radiator shipping to 23464

Too bad you aren't closer to me. Shipping on that hood would be crazy. I'm going to make a list and pm you with shippable items. Still have the trunk garnish?

Sorry I left you hanging, I had some complications acquiring my ej22t long block. I've finally got the engine and I will take it if you still have it.

I'll dig into my spare parts den this week, but I'm pretty sure I have a couple odds and ends for the na legacy laying around.

Location?

Sweet. This will bolt up to my ej22t without too much modding right? I can send the funds through PayPal by Saturday.