injector question

92legacyss · Post by **92legacyss** » Tue Sep 08, 2009 1:08 am

If i put sti fuel rails on my ss could i use the top feed style injectors??

macipusy · Post by **macipusy** » Tue Sep 08, 2009 4:44 pm

I am pretty sure the top feeds take a different intake manifold to work.

You can get n/a 2.2L fuel rails and run STi side feeds.

92legacyss · Post by **92legacyss** » Tue Sep 08, 2009 5:29 pm

ok thanks

asc_up · Post by **asc_up** » Tue Sep 08, 2009 5:36 pm

For what it's worth, I'm running JDM 440cc side feed injectors (gray tops) in the stock Legacy Turbo rails.

92legacyss · Post by **92legacyss** » Wed Sep 09, 2009 1:19 am

nice do you know where i can get some or where you got yours? Also do the electrical connections match up or do they need to be custom

92legacyss · Post by **92legacyss** » Wed Sep 09, 2009 1:21 am

On another note, The TD04, TMIC, WRX coolant reservoir and Atmos BOV are going on, friday i will post pics under the turbo section of the forum after i am done

AWD_addict · Post by **AWD_addict** » Wed Sep 09, 2009 7:14 am

Connectors are the same style between EJ22T pink tops and EJ20G gray tops. They are just rotated 180 degrees.

92legacyss · Post by **92legacyss** » Wed Sep 09, 2009 2:27 pm

Thanks that helps alot

macipusy · Post by **macipusy** » Wed Sep 09, 2009 3:08 pm

Think about how much you are going to mod your car.

If you get the 440's and decide the td04 is too small for you, you'll most likely have to upgrade injectors again to match a bigger turbo.

If you go with the STi 550's in N/A rails, you can down tune them and have room for upgrading to a vf39 later if you wish.

92legacyss · Post by **92legacyss** » Wed Sep 09, 2009 5:45 pm

Alright thanks

legacycentral bbs

A forum for 89-94 BC-BF(BJ) Legacy Owners and Fans

injector question

injector question