SVX Injector size?

Snorkus, filters, throttle bodies and intake manifolds.

Moderators: Helpinators, Moderators

Post Reply
martimus919
First Gear
Posts: 222
Joined: Sat Sep 19, 2009 6:21 am
Location: Reno, NV

SVX Injector size?

Post by martimus919 »

I picked up some SVX injectors and would like to use them for my SS for when i get the Stage 2 Revtronix chip, but i don't know what size they are. So any one got any idea of where find out the size?
PhyrraM
Fourth Gear
Posts: 1980
Joined: Thu Aug 11, 2005 4:34 pm
Location: Lake Elsinore, CA

Post by PhyrraM »

I'm not sure of the size, but considering that the SVX was rated at 230HP from 6 cylinders (~150HP if it was 4 cyl), the injectors are most likely about the same as any other normaly aspirated injector. In other words....Stock SS injectors are most likely higher flowing.
'93 Winestone SS Auto, '91 Pearl White SS.
'93 Pure White SS EJ20G slanty intercooled, SIDESWIPED! In stasis.
'94 FWD and '95 AWD Laguna Blue SVXs.
2017 Pure Red BRZ Limited w/Performance pack
martimus919
First Gear
Posts: 222
Joined: Sat Sep 19, 2009 6:21 am
Location: Reno, NV

Post by martimus919 »

Ya I was afraid of that
wtdash
Fifth Gear
Posts: 2345
Joined: Fri May 04, 2007 4:09 pm
Location: N. ID

Post by wtdash »

From HERE:
The SVX injectors are side feed and from what I can tell are rated somewhere between 260-275cc/min.
and HERE.
the injectors are a different story as they are 275cc jobs that are going to be maxed out at 250 HP.
Based on Opposedforces.com the SVX injectors are a unique part number, but I'd bet the EJ22/25 red injectors would also work as they are rated around 280cc.

Td
Last edited by wtdash on Wed Jul 18, 2012 5:08 pm, edited 2 times in total.
Turbo Subies:
'87 GL-10 Turbo - SOLD
'90 BJ EJ22T/DOHC & 5speed swap - SOLD
'04 FXT, Forged internals, VF39, STI TMIC, Cobb AP- SOLD
'93 Legacy SS - 5-speed, SOLD :-(
'02 WRX -SOLD
'96 BD-turbo'd-SOLD
'98 SF - NA-T
gijonas
Fourth Gear
Posts: 1010
Joined: Sat Nov 08, 2008 10:57 pm
Location: Damariscotta, Maine

Post by gijonas »

The eg33 is a 2.2 with 2 additional cylinders.Therefor the injectors are most likely the same parts as the ej22 N/A.
94SS.Wiseco forged pistons,TD04,TMIC,WALBRO 225,440's,3" all the way,revtronix stage 2,enough other crap to fill the internet.

THE TRIBUTE BUILD>>>LINKY LINK>>> http://bbs.legacycentral.org/viewtopic.php?p=295455#295455
Post Reply