legacycentral bbs

Well you know how we have the 3 vac lines from our BCS, the bottom one that use the connect to the Black resonator now does not have a place to go. I was wondering if i should use to "T" and have it connected to the intake somehow

Yes, you should use a tee and tie it back into the intake before the turbo.

the nipple on the back of the apexi elbow is for the bcs, which by the looks of the pic the charcoal line is crammed on there? you can remove that canister line and the little valve T'd off the manifold and use a n/a canister

So ditch the turbo canister and hook the line to the BCS?

So does this mean this gets removed?

Is that vent line currently hooked up? If you run the non-turbo canister, it will only have two lines, one will go in, and one will go out to the canister purge solenoid. You will then eliminate the line in the picture.

If you don't have the non-turbo canister, put a plug on that third port on the canister.

Then you'll have a spot to put the vent line for the BCS.