»  BC-BF Legacy Discussion »  Intake
#Need O-ring Part #

Custom Search
Login | Register




Post new topic Reply to topic  [ 9 posts ] 
Author Message
 Post subject: Need O-ring Part #
PostPosted: Tue Apr 26, 2011 12:38 am 
Fourth Gear
Joined: Thu Dec 24, 2009 1:24 am
Posts: 1161
Location: Lynnwood, Wa.
I think i have pinched a couple o-rings on my 05 Sti sidefeed injectors. Does anybody have the part numbers? I' like to replace the upper, middle and lower o-rings.
I checked out opposedforces.com but couldn't locate them. I called my dealer, but the guy seemed like he was lost and said he can only find o-rings from rail to fuel line, and that I'll have to buy the whole injector. :roll:

_________________
1994 Legacy Sport Sedan.
1991 Legacy Sport Sedan.


Profile  Offline
 
 Post subject: Re: Need O-ring Part #
PostPosted: Tue Apr 26, 2011 1:17 am 
Fifth Gear
Joined: Mon Nov 06, 2006 3:41 am
Posts: 7607
Location: Tenino, WA
Ask witchhunter they probably know. They gave me all new O rings when I had my yellowtops cleaned and flow tested.

_________________
98 Metro Hatch Daily Driver :)
91 SS EJ20G Engine/Tranny/Diff Swap Build Thread Here
"Your testes are close to your bottom but you still play with them all the time." Jeremy Clarkson


Profile  Offline
 
 Post subject: Re: Need O-ring Part #
PostPosted: Tue Apr 26, 2011 8:25 am 
Fourth Gear
Joined: Thu Dec 24, 2009 1:24 am
Posts: 1161
Location: Lynnwood, Wa.
How much did that cost you? I'm thinking about doing the same thing but I fear its gonna be spendy.

_________________
1994 Legacy Sport Sedan.
1991 Legacy Sport Sedan.


Profile  Offline
 
 Post subject: Re: Need O-ring Part #
PostPosted: Tue Apr 26, 2011 8:49 am 
Fifth Gear
Joined: Mon Nov 06, 2006 3:41 am
Posts: 7607
Location: Tenino, WA
It's $20 per injector and comes with all new O rings. That's flow testing, then cleaning, then flow testing again. $10 flat rate for shipping.

http://witchhunter.com/

_________________
98 Metro Hatch Daily Driver :)
91 SS EJ20G Engine/Tranny/Diff Swap Build Thread Here
"Your testes are close to your bottom but you still play with them all the time." Jeremy Clarkson


Profile  Offline
 
 Post subject: Re: Need O-ring Part #
PostPosted: Wed Apr 27, 2011 7:29 am 
First Gear
Joined: Fri Jul 09, 2010 1:41 am
Posts: 133
Location: Bend, Oregon
wow thats pretty cheap. Just checked out there site and they have tons of neat info on there. Plus they can mod some models of stock injectors to flow over 800cc for like nothing compared to buying new injectors and their o rings ie. 25-50 bucks a piece. Which is pretty cool if you have engine managment. I dont, but its still cool.

_________________
1991 SS EJ20G 16G


Profile  Offline
 
 Post subject: Re: Need O-ring Part #
PostPosted: Wed Apr 27, 2011 8:27 am 
Fifth Gear
Joined: Mon Nov 06, 2006 3:41 am
Posts: 7607
Location: Tenino, WA
You can get 800cc injectors for $300 a set new I believe so I wouldn't mod mine.

_________________
98 Metro Hatch Daily Driver :)
91 SS EJ20G Engine/Tranny/Diff Swap Build Thread Here
"Your testes are close to your bottom but you still play with them all the time." Jeremy Clarkson


Profile  Offline
 
 Post subject: Re: Need O-ring Part #
PostPosted: Wed Apr 27, 2011 3:09 pm 
Fourth Gear
Joined: Fri May 04, 2007 4:09 pm
Posts: 1623
Location: N. ID
Contact Jamie - sales@subarugenuineparts.com - @ subarugenuineparts.com. She can bring up the injector and O-rings and send you a pic to choose what you need.

I also 2nd using Witchhunter.

TD

_________________
'90 BJ, EJ22T/DOHC and 5-speed swap - SOLD
'04 FXT, Forged internals, VF39, STI TMIC, Cobb AP- SOLD
'96 Impreza - resisting the urge to swap.


Profile  Offline
 
 Post subject: Re: Need O-ring Part #
PostPosted: Thu Apr 28, 2011 8:04 am 
Fourth Gear
Joined: Thu Dec 24, 2009 1:24 am
Posts: 1161
Location: Lynnwood, Wa.
After going to subaru, they sent me to carb connection which sent me to napa which finally sent me to Tony @ kirkland transmission/Dr. Injector in kirkland where I finally found them. Got the uppers and lowers for $21. For anybody looking at this thread in the future.

_________________
1994 Legacy Sport Sedan.
1991 Legacy Sport Sedan.


Profile  Offline
 
 Post subject: Re: Need O-ring Part #
PostPosted: Thu Apr 28, 2011 5:50 pm 
Site Admin
Site Admin
Joined: Tue Oct 15, 2002 11:37 am
Posts: 22875
Location: Houston, Tx
wtdash wrote:
Contact Jamie - sales@subarugenuineparts.com - @ subarugenuineparts.com. She can bring up the injector and O-rings and send you a pic to choose what you need.
TD



Just an FYI, Jamie has left Chaplins/Subarugenuineparts to work for the marketing company behind DirtFish.

You can still order parts through there. I got some the other day, so we'll see how the new person handles things...

_________________
Josh

surrealmirage.com/subaru
1990 Legacy (AWD, 5MT, & EJ22T Swap)
1997 Impreza OBS

If you need to get a hold of me please email me rather then pm


Profile  Offline
 

Display posts from previous:  Sort by  

Post new topic Reply to topic  [ 9 posts ] 


Who is online

Users browsing this forum: No registered users and 1 guest

Panel

Top You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
Search for:
Jump to:  

Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
Dizayn Ercan Koc