PRICE DROP Td05-16G, 550cc, Legacy Turbo build parts,

[jyrine]

UPDATE: PRICE DROP.

Selling off stuff I no longer need from my 1994 legacy turbo build. Will work with other vehicles.

LINK TO PICTURES

1. 1 Sets of STi Yellow 550cc injectors. - - $110
2. 2 sets of 440cc injectors. - - SOLD
3. Revtronix ECU set for 18psi, no launch control, Rev limiter at 6800rpm, setup for 440cc injectors. - - SOLD
4. WRX TMIC with piping and hybrid BOV. - - SOLD
5. JDM factory (Mitsubishi) 90 degree TD05 16g turbo with oil lines, no leaks and absolutely zero shaft play, not sure on miles but have personally added 40,000 miles - - SOLD
6. ~150k mile 4.44 legacy rear diff, fresh oil. - - $110
7. ~150k mile 4.44 rear axles. - - $100

A little more info as well, if you have a first generation turbo legacy and want bolt on parts this is the setup for you. the ECU, with td05, 440cc's, and wrx tmic is what I ran. I used to run a factory recirculate but the hybrid will run just as well and give you the famous "psssh" when you let off throttle. The revtronix tune is designed to give you 18psi limit, run 440cc injectors, and work with the metal MAF. Rough estimate from identical setups, you go from 160bhp factory to ~280bhp.

Also, if you have an svx and are thinking of upgrading to the 4.44 transmission, you'll need matching axles and a differential, these ones I have are the R160 version and will drop right in as well.

All prices are OBO and I am willing to travel around the capital of Washington. Someone looking to buy a lot of parts for a fair price will get me to travel further. More pics upon request.

UPDATE: Some parts sold, new parts for sale. Some still available and new link provided with new images and some old ones. More pics upon request. NEW ITEMS LISTED BELOW

8. Kartboy shortshifter for 5 speed. - - SOLD
9. "RedTop" OEM Injectors, never ran - - SOLD
10. A set of Raptor Ground Loop Isolators, perfect for removing alternator whine - - Make an offer.
11. Stock set of spark plug wires from my ej22t, worked perfect when pulled - - Make an offer.
12. HVAC controls for 90-94 Legacy. A/C delete with Recirc button. Imported it from Germany but going a different route - - Make an offer.
13. AVO TurboWorld Boost gauge that measures in bars, goes to 1.6bar (or ~23psi) - - Make an offer
14. Braided Stainless steel clutch hose, bypasses the clutch delay valve (so does the stock technically) but this is a good solid (and fresh) replacement. Never used. - - $70.
15. Two remaining 440cc injectors, Never ran - - Make an offer.
16. Ej22t Intake, comes with fuel rails and some hoses - - SOLD

[aredub2]

Thanks for the parts! It was nice to meet you.


Sent from my iPhone using Tapatalk

[legacyfrank]

Man I wish I lived closer. Would totally be interested in that svx rear diff swap.

Would you be willing to sell that plastic 90 that you have pictured on the turbo? and what is the condition of it? Thanks

[jyrine]

Thanks for the parts! It was nice to meet you.


Sent from my iPhone using Tapatalk

Great meeting you too!

Man I wish I lived closer. Would totally be interested in that svx rear diff swap.

Would you be willing to sell that plastic 90 that you have pictured on the turbo? and what is the condition of it? Thanks

Unfortunately the 90 degree was sold a while back, never updated the picture. It was in perfect condition though and was from an ej20g. I know, impossible to find. lol.

Where are you though in reference to me? I delivered some parts over 3 hours away for a very large purchase so if you're not too far away I could make the trip or work a deal with you on the SVX parts. Do you have an SVX? Because I have other parts for one available as well but didn't list because this is mostly for legacys.

[legacyfrank]

I'm in Michigan. A little ways away lol. Wish I was closer.

Yes I do have an svx. I could use a interior piece for it I dark grey.

[jyrine]

Bump. Still have a lot of things left.

[jyrine]

BUMP: Price Drop!