Hey guys. I have a 85 Brat with a new 2.2T, never been fired yet, and I am getting ready to test fire to make sure I have the harness good to go.
Some questions:
I wired in the Ej alt to the Ea harness and I have it:
Ea Big white wire goes to Ej Big white to Lug on Alt; it also splices and jumps "white" to one of the wires on the round alt plug.
Ea white to Ej yellow on round alt plug
Ea -white/red stripe to Ej- Black/white stripe
Is that right????
Also, on 16 Pin, B56 connector, terminal 10 says red/yellow and blue/red, goes to Ign sw, P, N.
Off my 16 pin conn., it jumps up a wire size, still red/yellow, with the end having a female spade connector.
Does that go to the starter?
Plus, what do I do with the blue/red wire????
Ej to Ea harness
Moderators: Helpinators, Moderators
-
- In Neutral
- Posts: 41
- Joined: Fri May 13, 2011 3:04 am
Ej to Ea harness
86 Brat, 2.2T, AWD, TD04, Intercooled,
88 Rx, Future EJ upgrade soon
88 Rx, Future EJ upgrade soon
-
- In Neutral
- Posts: 41
- Joined: Fri May 13, 2011 3:04 am
Re: Ej to Ea harness
Hey I found the info on the B56 pinout, on the sticky, first post on this section.
Anyone confirm the hook up on the alt???
Anyone confirm the hook up on the alt???
86 Brat, 2.2T, AWD, TD04, Intercooled,
88 Rx, Future EJ upgrade soon
88 Rx, Future EJ upgrade soon
Re: Ej to Ea harness
Are you still looking for this info?
Do you have a wiring diagram for the EA motor?
Do you have a wiring diagram for the EA motor?
Josh
surrealmirage.com/subaru
1990 Legacy (AWD, 6MT, & EJ22T Swap)
2020 Outback Limted XT
If you need to get a hold of me please email me rather then pm
surrealmirage.com/subaru
1990 Legacy (AWD, 6MT, & EJ22T Swap)
2020 Outback Limted XT
If you need to get a hold of me please email me rather then pm