Bog issue. 4psi- psi 2800 rpms - 3200rpm?

That spinning thing that makes all of the cool noises. OE and Aftermarket.

Moderators: Helpinators, Moderators

Post Reply
dillonr92
First Gear
Posts: 177
Joined: Wed Feb 27, 2013 6:22 am
Location: PDX

Bog issue. 4psi- psi 2800 rpms - 3200rpm?

Post by dillonr92 »

So In my 92 turbo legacy. Since I put the td04 in I've had a bogging issue around 4 psi to 9psi. And around 2800 rpm to 3200rpm. After that range it hits 10+psi and little higher rpm then pulls great. I've checked to see if there is any leaks everything good there. it holds pressure and boosts no problem. But it Boggs hella in that rpm/psi range.. I'm stumped.

Sent from my SCH-I545 using Tapatalk
92 SS winestone red. td04 - FMIC. RWD 5 spd swap/LSD.dead...
94 LEGACY GT RAISED ROOF WAGON, fozzy lift hydro clutch/91SS 5speed/VLSD..#5.NEW FuLL DRiFT SLuT 93SS winestone,RS 5speed RWD. Welded rear, td04, fmic, 17x9 +20
Legacy777
Site Admin
Site Admin
Posts: 27884
Joined: Tue Oct 15, 2002 11:37 am
Location: Houston, Tx
Contact:

Re: Bog issue. 4psi- psi 2800 rpms - 3200rpm?

Post by Legacy777 »

Can you tell us a little more about your setup and how long has this been happening.

When you swapped in the TD04, did you also install the TMIC? Do you have a 90 degree silicone or rubber adapter on the turbo inlet?
Josh

surrealmirage.com/subaru
1990 Legacy (AWD, 6MT, & EJ22T Swap)
2020 Outback Limted XT

If you need to get a hold of me please email me rather then pm
wtdash
Fifth Gear
Posts: 2345
Joined: Fri May 04, 2007 4:09 pm
Location: N. ID

Re: Bog issue. 4psi- psi 2800 rpms - 3200rpm?

Post by wtdash »

Stock injectors correct?
Turbo Subies:
'87 GL-10 Turbo - SOLD
'90 BJ EJ22T/DOHC & 5speed swap - SOLD
'04 FXT, Forged internals, VF39, STI TMIC, Cobb AP- SOLD
'93 Legacy SS - 5-speed, SOLD :-(
'02 WRX -SOLD
'96 BD-turbo'd-SOLD
'98 SF - NA-T
Post Reply