»  BC-BF Legacy Discussion »  Intercooling
#07 WRX TMIC & TD05H-16G installation guide

Custom Search
Login | Register




Post new topic Reply to topic  [ 98 posts ]  Go to page Previous  1, 2, 3, 4
Author Message
 Post subject: Re: 07 WRX TMIC & TD05H-16G installation guide
PostPosted: Sun Aug 14, 2011 6:00 am 
Second Gear
Joined: Wed Jan 19, 2011 7:10 pm
Posts: 487
Location: norcal, CA
So basically move the Ftube around and make it fit as best as possible? the TBPS and the coils wires etc. i test fitted the TD05 and it looked like the Intercooling pipe was not even close o.O

_________________
Tune
TMIC
Fuel
Taillight
n2x4 wrote:
Seriously, anything will fit. Subarus are LEGOs.



Profile  Offline
Reply with quote  
 Post subject: Re: 07 WRX TMIC & TD05H-16G installation guide
PostPosted: Mon Aug 15, 2011 5:57 pm 
Fourth Gear
Joined: Tue Sep 12, 2006 6:49 am
Posts: 1637
Location: Seattle, WA
Yes, move the f-tube so it clears the turbo and intercooler. It doesn't have the stay in the same orientation as OEM -- just as long as the lines go to their correct destinations as OEM.

As stated in the guide, you'll need to modify any Y-tubing you purchase to make it work with any 90* clocked turbo (td04, td05, vf39, etc) and our cars.

_________________

'11 WRX Limited
'94 SS | 3" TBE, 07 TMIC, TD05H-16G, Revtronix Stage 2, Walbro -- Sold
'94 TW | R.I.P.


Profile  Offline
Reply with quote  
 Post subject: Re: 07 WRX TMIC & TD05H-16G installation guide
PostPosted: Mon Aug 15, 2011 10:17 pm 
Second Gear
Joined: Wed Jan 19, 2011 7:10 pm
Posts: 487
Location: norcal, CA
What did you do for the coolant line? it was different then the VF11?

_________________
Tune
TMIC
Fuel
Taillight
n2x4 wrote:
Seriously, anything will fit. Subarus are LEGOs.



Profile  Offline
Reply with quote  
 Post subject: Re: 07 WRX TMIC & TD05H-16G installation guide
PostPosted: Tue Aug 16, 2011 4:28 am 
Fourth Gear
Joined: Tue Sep 12, 2006 6:49 am
Posts: 1637
Location: Seattle, WA
Coolant lines stayed in the same place.

_________________

'11 WRX Limited
'94 SS | 3" TBE, 07 TMIC, TD05H-16G, Revtronix Stage 2, Walbro -- Sold
'94 TW | R.I.P.


Profile  Offline
Reply with quote  
 Post subject: Re: 07 WRX TMIC & TD05H-16G installation guide
PostPosted: Mon Aug 22, 2011 3:19 am 
In Neutral
Joined: Tue Jul 13, 2010 7:02 am
Posts: 17
Location: SLC, UT
I think this y pipe set up would work, any opinions?
http://cgi.ebay.com/ebaymotors/Top-Moun ... 5ade44bf3c


Profile  Offline
Reply with quote  
 Post subject: Re: 07 WRX TMIC & TD05H-16G installation guide
PostPosted: Mon Aug 22, 2011 4:40 am 
First Gear
Joined: Thu Oct 16, 2008 10:46 pm
Posts: 75
Location: Portland OR
I just installed that exact same kit, it works way better than the Perrin one I had before.

you really can't beat it for the price. but i would recommend getting a slightly longer piece of straight silicone it makes life alot easier .

_________________
Kris

92 SS, ej20g, camo wrap, 16g, 06 intercooler,
Robtune, 550s


Profile  Offline
Reply with quote  
 Post subject: Re: 07 WRX TMIC & TD05H-16G installation guide
PostPosted: Mon Aug 22, 2011 7:04 pm 
First Gear
Joined: Sat Aug 15, 2009 3:00 am
Posts: 161
Location: Fairbanks, Alaska
I was looking at that y-pipe kit too, and if you have pictures of it installed to share, that would be great. I was thinking about this one, for a GC8 WRX? I found this style on eBay and it looks like the lower leg to the turbo is longer. That might be able to make up the extra length needed instead of the extra set of clamps and the metal pipe.

Ebay Item number: 300381786957
$110.00 Image

Ebay Item number: 120511544072
$65.00 Image


What do you guys think about that?

_________________
Check out my project car build threads, 1995 - Impreza 2-door & 1991 - Legacy SS.


Profile  Offline
Reply with quote  
 Post subject: Re: 07 WRX TMIC & TD05H-16G installation guide
PostPosted: Thu Aug 25, 2011 3:01 am 
In Neutral
Joined: Tue Jul 13, 2010 7:02 am
Posts: 17
Location: SLC, UT
legacylok wrote:
I just installed that exact same kit, it works way better than the Perrin one I had before.

you really can't beat it for the price. but i would recommend getting a slightly longer piece of straight silicone it makes life alot easier .


just got the kit today and I get what you mean by needing a longer piece. When i bolt the 2 pieces on the the 07 topmount they're offset so the short piece of piping won't really work.


Profile  Offline
Reply with quote  
 Post subject: Re: 07 WRX TMIC & TD05H-16G installation guide
PostPosted: Fri May 03, 2013 4:15 am 
Second Gear
Joined: Wed May 19, 2010 2:59 am
Posts: 256
Location: Portland, Oregon
What sizes are we talking for the 90 Degree bend and the 2" piece of silicone tubing 2 inch?

_________________
1996 Subaru Legacy L
1993 Subaru Legacy SS
1992 Subaru Legacy L
1990 Subaru Legacy L


Profile  Offline
Reply with quote  
 Post subject: Re: 07 WRX TMIC & TD05H-16G installation guide
PostPosted: Fri May 03, 2013 3:22 pm 
Fifth Gear
Joined: Fri Jun 20, 2008 8:17 am
Posts: 6164
Location: Lakewood, Wa 98439
for the 90 degree bend I think you'll want a 1.75' to 2" reducer. For the 2" piece of silicone, you want 2"........

_________________
91 L-TW Wagon with a full Swap -RIP
92 SS Prefaced, GD dash swapped, 22T/205 Hybrid 20 psi - BEAST!
93 SS Bone Stock Gone!
94 TW Bone Stock Gone!
91 SS 4EAT Sold!
98 LGT 4EAT
98 LGT Wagon 4EAT


Profile  Offline
Reply with quote  
 Post subject: Re: 07 WRX TMIC & TD05H-16G installation guide
PostPosted: Fri May 03, 2013 5:31 pm 
Second Gear
Joined: Wed May 19, 2010 2:59 am
Posts: 256
Location: Portland, Oregon
I don't see a 1.75" to 2" reducer. I see the 2.5" to the 1.75" thats about it on silicone intakes.

_________________
1996 Subaru Legacy L
1993 Subaru Legacy SS
1992 Subaru Legacy L
1990 Subaru Legacy L


Profile  Offline
Reply with quote  
 Post subject: Re: 07 WRX TMIC & TD05H-16G installation guide
PostPosted: Fri May 03, 2013 5:36 pm 
Fifth Gear
Joined: Fri Jun 20, 2008 8:17 am
Posts: 6164
Location: Lakewood, Wa 98439
Thats only if yoire using the vf11 tho. If youre doing the td05 you dont need the 45 degree bend. Sorry, I should have been more accurate.

You just need the 02-05 y pipe kit and a small piece of 2" pipe. And longer piece of 2" silicone.

Sent from my SGH-T989 using Tapatalk 2

_________________
91 L-TW Wagon with a full Swap -RIP
92 SS Prefaced, GD dash swapped, 22T/205 Hybrid 20 psi - BEAST!
93 SS Bone Stock Gone!
94 TW Bone Stock Gone!
91 SS 4EAT Sold!
98 LGT 4EAT
98 LGT Wagon 4EAT


Profile  Offline
Reply with quote  
 Post subject: Re: 07 WRX TMIC & TD05H-16G installation guide
PostPosted: Sun May 12, 2013 6:23 am 
Second Gear
Joined: Wed May 19, 2010 2:59 am
Posts: 256
Location: Portland, Oregon
Bought a 2.25" 90 degree bend for the TD04. This is for where it connects to the factory intake. This the right size? Talking about the area circled in red off the turbo.

Image

_________________
1996 Subaru Legacy L
1993 Subaru Legacy SS
1992 Subaru Legacy L
1990 Subaru Legacy L


Profile  Offline
Reply with quote  
 Post subject: Re: 07 WRX TMIC & TD05H-16G installation guide
PostPosted: Sun May 12, 2013 2:32 pm 
Fifth Gear
Joined: Fri Jun 20, 2008 8:17 am
Posts: 6164
Location: Lakewood, Wa 98439
yes

_________________
91 L-TW Wagon with a full Swap -RIP
92 SS Prefaced, GD dash swapped, 22T/205 Hybrid 20 psi - BEAST!
93 SS Bone Stock Gone!
94 TW Bone Stock Gone!
91 SS 4EAT Sold!
98 LGT 4EAT
98 LGT Wagon 4EAT


Profile  Offline
Reply with quote  
 Post subject: Re: 07 WRX TMIC & TD05H-16G installation guide
PostPosted: Sat Jun 01, 2013 7:10 pm 
Second Gear
Joined: Tue Jul 06, 2010 7:47 am
Posts: 417
Location: Spokane, WA
I see someone asked before but have not found any info on anyone trying the silicone y pipe for a GC8 wrx. Whether it would be 93-95 or 96-00? I looked up pictures of a 95-96 jdm wrx and it had the slanty intercooler and uses a similar manifold to the EJ22t so the distance of the throttle body and firewall looks to be the same. So, the distance from the turbo outlet and intercooler inlet would be right on but I have never seen a slanty intercooler to see how the y pipe matches up with it. So the question is, would a silicone y pipe meant for a jdm GC8 wrx work with a 06/07 wrx intercooler on an EJ22t with the TD05? I may have to purchase one to find out if no one else has tried it.

_________________
93 Black Legacy SS
93 Legacy L sedan
93 Legacy Wagon
95 Impreza coupe- EJ22t swap, 02 Forester 5mt, 01 RS LSD rear diff, TD05, Robtune-550
98 RHD Legacy-Current build-EJ22E/96EJ25D, TD05, Robtune-550, 5spd swap
97 Outback-Wife's car, 5 spd swap


Profile  Offline
Reply with quote  
 Post subject: Re: 07 WRX TMIC & TD05H-16G installation guide
PostPosted: Wed Apr 27, 2016 8:06 pm 
Third Gear
Joined: Sun Aug 06, 2006 6:25 am
Posts: 702
Location: Littleton, CO
Pics stopped working :(

_________________
1993 Legacy Turbo Sedan SadPanda
1994 Legacy Turbo Wagon (Aspen)--SOLD
1990 2.2l Legacy--RIP
Keeping the Legacy's Legacy

"Straight roads are for fast cars. turning roads are for fast drivers"


Profile  Offline
Reply with quote  
 Post subject: Re: 07 WRX TMIC & TD05H-16G installation guide
PostPosted: Wed May 04, 2016 6:18 pm 
Site Admin
Site Admin
Joined: Tue Oct 15, 2002 11:37 am
Posts: 26948
Location: Houston, Tx
I'd suggest trying send the original post an email or PM to see if he still has the pictures.

_________________
Josh

surrealmirage.com/subaru
1990 Legacy (AWD, 6MT, & EJ22T Swap)
1997 Impreza OBS

If you need to get a hold of me please email me rather then pm


Profile  Offline
Reply with quote  
 Post subject: Re: 07 WRX TMIC & TD05H-16G installation guide
PostPosted: Thu May 05, 2016 8:12 pm 
Third Gear
Joined: Sun Aug 06, 2006 6:25 am
Posts: 702
Location: Littleton, CO
Did anyone have any luck with this one? Motor is about to go in and I want to be able to put the intercooler in soon too.

http://www.grimmspeed.com/top-mount-int ... it-subaru/

_________________
1993 Legacy Turbo Sedan SadPanda
1994 Legacy Turbo Wagon (Aspen)--SOLD
1990 2.2l Legacy--RIP
Keeping the Legacy's Legacy

"Straight roads are for fast cars. turning roads are for fast drivers"


Profile  Offline
Reply with quote  
 Post subject: Re: 07 WRX TMIC & TD05H-16G installation guide
PostPosted: Fri May 06, 2016 5:14 am 
Moderator
Moderator
Joined: Tue Aug 25, 2009 7:52 am
Posts: 4441
Location: Des Moines, Wa
Wtdash and others tried that one. Worked good on the 02-05 tmic, the short silicone piece is horribly kinked on the 06-07. Unless they make an updated one specifically for your tmic i wouldnt bother.

_________________
1992 Legacy SS 5mt, reasonably modified ;)


Profile  Offline
Reply with quote  
 Post subject: Re: 07 WRX TMIC & TD05H-16G installation guide
PostPosted: Fri May 06, 2016 3:30 pm 
Third Gear
Joined: Sun Aug 06, 2006 6:25 am
Posts: 702
Location: Littleton, CO
Ok thanks

_________________
1993 Legacy Turbo Sedan SadPanda
1994 Legacy Turbo Wagon (Aspen)--SOLD
1990 2.2l Legacy--RIP
Keeping the Legacy's Legacy

"Straight roads are for fast cars. turning roads are for fast drivers"


Profile  Offline
Reply with quote  
 Post subject: Re: 07 WRX TMIC & TD05H-16G installation guide
PostPosted: Sat May 07, 2016 5:41 am 
Site Admin
Site Admin
Joined: Tue Oct 15, 2002 11:37 am
Posts: 26948
Location: Houston, Tx
RckyMtnLegacy wrote:
Pics stopped working :(


Pics have been fixed.

_________________
Josh

surrealmirage.com/subaru
1990 Legacy (AWD, 6MT, & EJ22T Swap)
1997 Impreza OBS

If you need to get a hold of me please email me rather then pm


Profile  Offline
Reply with quote  
 Post subject: Re: 07 WRX TMIC & TD05H-16G installation guide
PostPosted: Sat May 07, 2016 3:00 pm 
Third Gear
Joined: Sun Aug 06, 2006 6:25 am
Posts: 702
Location: Littleton, CO
Well this is an exciting day!!

_________________
1993 Legacy Turbo Sedan SadPanda
1994 Legacy Turbo Wagon (Aspen)--SOLD
1990 2.2l Legacy--RIP
Keeping the Legacy's Legacy

"Straight roads are for fast cars. turning roads are for fast drivers"


Profile  Offline
Reply with quote  
 Post subject: Re: 07 WRX TMIC & TD05H-16G installation guide
PostPosted: Mon Aug 15, 2016 9:29 am 
In Neutral
Joined: Mon Mar 28, 2016 7:55 am
Posts: 2
Image

My mount, E85, VF12, Pink STI inj, GT SPEC headler and Prodrive 2.5" exhaust, TMIC WRX 06, new MAP ECU, 4.7V on MAF and 1.18 BAR (17psi), near 200 WHP


Profile  Offline
Reply with quote  

Display posts from previous:  Sort by  

Post new topic Reply to topic  [ 98 posts ]  Go to page Previous  1, 2, 3, 4


Who is online

Users browsing this forum: No registered users and 1 guest

Panel

Top You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
Search for:
Jump to:  

Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
Dizayn Ercan Koc