intercooler to intake manifold

Falken-18c · Post by **Falken-18c** » Sun Jul 31, 2011 11:32 pm

what type of hose do i need so i can clamp my intercooler to my intake manifold and where can i get it with out geting it online like a hardware store are ect thanks

Falken-18c · Post by **Falken-18c** » Mon Aug 01, 2011 1:29 am

i just thought could i use a 3inch pipe and just seal it to the intake manifold and intercooler i dont see why not but any information will help

Post by **Legacy777** » Mon Aug 01, 2011 1:48 am

Measure the diameter, it's probably 3". You should be able to get a 3" silicone coupler at the autoparts store.

Falken-18c · Post by **Falken-18c** » Mon Aug 01, 2011 2:22 am

yea hopefully. i went tonight at 6.30 and every thing was closed and i think nothing will be open tomorow because of some holiday that i dont know lol.. ok i asked my sister some civic holiday i guess i dont know atleast i get paid doing nothing lol. yea ill see what i can do tomorow and another thing just poped in my head should i wait til after i safety my car it shouldnt afect anything should it

Grayguy · Post by **Grayguy** » Mon Aug 01, 2011 3:06 am

I've found that at NAPA you can buy like 3 feet chunks of semi intercooler piping stuff for way cheaper than silicon couplers, they are reinforced rubber.

Guttersmash · Post by **Guttersmash** » Wed Sep 07, 2011 1:27 am

I work at autozone and we have 3 inch diameter silicone couplers for like $8. One of those would work fine.

Falken-18c · Post by **Falken-18c** » Sun Sep 11, 2011 9:54 pm

ya i ended up buying one from subaru 30$ lol

super_usdm · Post by **super_usdm** » Thu Sep 15, 2011 2:29 am

The ID of the coupler is 2.75", not 3".

legacycentral bbs

A forum for 89-94 BC-BF(BJ) Legacy Owners and Fans