Will a 98 Impreza muffler bolt on and fit in a 91legacy wagon?
I justy purchased a 91 legacy that has no muffler from the rear axle back.
Found a 98 Impreza Muffler on my local craigslist for $25 and was wondering if it will bolt right up?
Thanx
Heres a pic of the muffler in question
http://i146.photobucket.com/albums/r270 ... 130015.jpg
98 Impreza muffler into a 91 legacy wagon AWD ???
Moderators: Helpinators, Moderators
-
trendyincdotbiz
- In Neutral
- Posts: 27
- Joined: Tue Oct 14, 2008 4:35 pm
- Location: oregon
- Contact:
98 Impreza muffler into a 91 legacy wagon AWD ???
www.tunerautomotive.net
www.myspace.com/tunerautomotive
www.myspace.com/tunerautomotive
It won't bolt up without some slight modifications. The pipe needs to be extended, and the exhaust hanger needs to be bent.
You'd probably be better just getting a generic muffler meant to fit the legacy, that or have a shop fab something up.
That or try and find a legacy specific muffler section.
This thread should give you an idea of what needs to be modified
http://bbs.legacycentral.org/viewtopic. ... za+muffler
You'd probably be better just getting a generic muffler meant to fit the legacy, that or have a shop fab something up.
That or try and find a legacy specific muffler section.
This thread should give you an idea of what needs to be modified
http://bbs.legacycentral.org/viewtopic. ... za+muffler
Josh
surrealmirage.com/subaru
1990 Legacy (AWD, 6MT, & EJ22T Swap)
2020 Outback Limted XT
If you need to get a hold of me please email me rather then pm
surrealmirage.com/subaru
1990 Legacy (AWD, 6MT, & EJ22T Swap)
2020 Outback Limted XT
If you need to get a hold of me please email me rather then pm
-
trendyincdotbiz
- In Neutral
- Posts: 27
- Joined: Tue Oct 14, 2008 4:35 pm
- Location: oregon
- Contact:
-
the f bomb
- In Neutral
- Posts: 4
- Joined: Thu Feb 12, 2009 9:26 pm
i know it's an old thread, but...
i just put the mid pipe from an 05 sti and the tailpipe/muffler from a wrx on my 91 awd wagon and it was pretty easy. i welded in the extension in the front of the midpipe, just behind the flange and did a little relocation on the rear muffler hangers and presto it was there. you can find these parts really cheap these days also. So you basically have a nice cat-back for $50-100
i just put the mid pipe from an 05 sti and the tailpipe/muffler from a wrx on my 91 awd wagon and it was pretty easy. i welded in the extension in the front of the midpipe, just behind the flange and did a little relocation on the rear muffler hangers and presto it was there. you can find these parts really cheap these days also. So you basically have a nice cat-back for $50-100