I am in the process of converting my original RHD 93 Subaru Legacy from a cable clutch to hydraulic.
After plenty of research I landed on a USDM LHD 04-07 STI master cylinder, it bolts right up, however the rod that connects to the pedal is too short. I am able to connect it when the pedal is all the way on the floor, but then it won't come back up because the rod seems to be fully extended already.
This is my first experience with any hydraulic clutch components, am I missing something simple?
Could the master cylinder be different LHD vs RHD?
In this photo the clutch pedal is at the top of its throw
Clutch Master Problem, please help!
Moderators: Helpinators, Moderators
-
- Third Gear
- Posts: 610
- Joined: Sat Mar 22, 2014 3:10 am
- Location: Northern Virginia, USA
- Contact:
Clutch Master Problem, please help!
Parts Needed:
Manual Cluster
Front & Rear bumper Chrome Trim
Manual Cluster
Front & Rear bumper Chrome Trim
-
- Third Gear
- Posts: 610
- Joined: Sat Mar 22, 2014 3:10 am
- Location: Northern Virginia, USA
- Contact:
Re: Clutch Master Problem, please help!
Here is a picture of the master that I purchased. Anyone care to measure a Legacy turbo one for me?
Parts Needed:
Manual Cluster
Front & Rear bumper Chrome Trim
Manual Cluster
Front & Rear bumper Chrome Trim
Re: Clutch Master Problem, please help!
I don't have the measurement, but you will likely need a longer push rod or bracket. If you remove the rubber boot where the push rod goes into the master cylinder can you remove the push rod and maybe find a longer replacement?
Josh
surrealmirage.com/subaru
1990 Legacy (AWD, 6MT, & EJ22T Swap)
2020 Outback Limted XT
If you need to get a hold of me please email me rather then pm
surrealmirage.com/subaru
1990 Legacy (AWD, 6MT, & EJ22T Swap)
2020 Outback Limted XT
If you need to get a hold of me please email me rather then pm
-
- Third Gear
- Posts: 610
- Joined: Sat Mar 22, 2014 3:10 am
- Location: Northern Virginia, USA
- Contact:
Re: Clutch Master Problem, please help!
That was my first thought too. I pulled the boot off and it seems to not be removable. I think I am going to have a friends machine shop extend it by an inch. I will report back!
Parts Needed:
Manual Cluster
Front & Rear bumper Chrome Trim
Manual Cluster
Front & Rear bumper Chrome Trim
Re: Clutch Master Problem, please help!
Ok, thanks for the update and let us know what you end up doing to get it working.
Josh
surrealmirage.com/subaru
1990 Legacy (AWD, 6MT, & EJ22T Swap)
2020 Outback Limted XT
If you need to get a hold of me please email me rather then pm
surrealmirage.com/subaru
1990 Legacy (AWD, 6MT, & EJ22T Swap)
2020 Outback Limted XT
If you need to get a hold of me please email me rather then pm