93 SS Legacy Ver3 Ra/Sti Swap Updated 6/25/13 Tomei Turbo
Moderator: Moderators
93 SS Legacy Ver3 Ra/Sti Swap Updated 6/25/13 Tomei Turbo
This is my 93 SS.
It has a JDM version 3 RA/STi swap.
VF23 Ball bearing turbo
JDM RA/STi tranny with DCCD 4.44 gears.
4.44 LSD rear end.
2008 STi oil pump
MRT TMIC
ROB tuned EJ20G ECU
Custom CNC machined throttle body spacer
WRX axles
WRX Brake calipers and Reactive pads
Hallman MBC,
SARD BOV
2003 Wrx wheels.
Invidia 3" catless bellmouth downpipe
3" catless exhaust w/ magnaflow muffler
STi Hood scoop
STi struts and springs
K&N cone filter
HKS Fuel cut defender
255lph DW fuel pump
Lots of JDM decals
Pink six star badge it the front
Recaro Sport front bucket seats
STi Rear seat
and more stuff im forgetting
Bought and not installed: 550 Side feed STi injectors, Silicone turbo inlet, MRT top mount, SARD BOV
The day I got her. Already had a EJ20G swap in it. I paid 600 for it. The guy I bought it from couldnt get to start. I put a fuel pump and fuel filter in it and it fired right up.
New 00/01 RS wheels and tires
Some porn
New Halman Pro MBC and HKS FCD
MBC installed
3M Headlight restore kit half done
New STi axle back
JDM Door decals
Out gettin dirty
Oh Shiz, the 20G is gone and the flat black paint fairy came in my engine bay.
It has arrived! Behold its JDM glory!
VF23 Ball bearing turbo
Took the manifold off to repaint
Used red caliper paint.
Swappin parts
Stage 3 F1 ceramic 6 puck clutch
Done....
Cleaned up the TMIC fins with a pic tool and painted
Used filler neck tubing to custom make a Y-pipe to fit my TMIC stock was too short. This is before I cut to fit. Super PIPE!
Stock
RA!!!!!
New HKS SSQV4
Blacked out the center garnish
New 03 WRX wheels with Brand new Toyo Proxes
Most recent mod. Fishing lure air freshener
It has a JDM version 3 RA/STi swap.
VF23 Ball bearing turbo
JDM RA/STi tranny with DCCD 4.44 gears.
4.44 LSD rear end.
2008 STi oil pump
MRT TMIC
ROB tuned EJ20G ECU
Custom CNC machined throttle body spacer
WRX axles
WRX Brake calipers and Reactive pads
Hallman MBC,
SARD BOV
2003 Wrx wheels.
Invidia 3" catless bellmouth downpipe
3" catless exhaust w/ magnaflow muffler
STi Hood scoop
STi struts and springs
K&N cone filter
HKS Fuel cut defender
255lph DW fuel pump
Lots of JDM decals
Pink six star badge it the front
Recaro Sport front bucket seats
STi Rear seat
and more stuff im forgetting
Bought and not installed: 550 Side feed STi injectors, Silicone turbo inlet, MRT top mount, SARD BOV
The day I got her. Already had a EJ20G swap in it. I paid 600 for it. The guy I bought it from couldnt get to start. I put a fuel pump and fuel filter in it and it fired right up.
New 00/01 RS wheels and tires
Some porn
New Halman Pro MBC and HKS FCD
MBC installed
3M Headlight restore kit half done
New STi axle back
JDM Door decals
Out gettin dirty
Oh Shiz, the 20G is gone and the flat black paint fairy came in my engine bay.
It has arrived! Behold its JDM glory!
VF23 Ball bearing turbo
Took the manifold off to repaint
Used red caliper paint.
Swappin parts
Stage 3 F1 ceramic 6 puck clutch
Done....
Cleaned up the TMIC fins with a pic tool and painted
Used filler neck tubing to custom make a Y-pipe to fit my TMIC stock was too short. This is before I cut to fit. Super PIPE!
Stock
RA!!!!!
New HKS SSQV4
Blacked out the center garnish
New 03 WRX wheels with Brand new Toyo Proxes
Most recent mod. Fishing lure air freshener
Last edited by mx4life on Wed Jun 26, 2013 5:56 am, edited 36 times in total.
-
- Fifth Gear
- Posts: 2774
- Joined: Sun Nov 23, 2003 12:22 am
- Location: Western WA!
Re: My 93 SS EJ20 ( NEW WHEELS TODAY!)
2000/01 RS Wheels! Gunna clean 'em up, puttires on 'em and go time!
Oh yea and a new STi sticker
Oh yea and a new STi sticker
Last edited by mx4life on Sat Jan 19, 2013 10:41 pm, edited 1 time in total.
Re: My 93 SS EJ20
Bought some 205/55/16's today and installed my new RS wheels!
Last edited by mx4life on Sat Jan 19, 2013 10:42 pm, edited 1 time in total.
Re: My 93 SS EJ20 (10/15 fog light install and black grill)
Installed fogs today and painted my grill.
This is the stock mounting plate that held the plastic in. I used it to mount my lights.
I mounted the lights using the holes in the middle, now there was only one screw that would hold this on and it was floppy. SOOOO.... I took 2 5mm nuts and threaded them onto the 2 plastic nubs at the top of the fog hole. If anyone else does this dont tighten them down to hard or they will strip out.
ALL DONE!
The grill looks sweet too. This process took 2 hours inclulding all the wiring.
The light are neat, they have a Blue halo ring on the outside that I hooked up to the turn signals. The halo flashes too when I make a turn. Of course I used a relay and fusable link also.
This is the stock mounting plate that held the plastic in. I used it to mount my lights.
I mounted the lights using the holes in the middle, now there was only one screw that would hold this on and it was floppy. SOOOO.... I took 2 5mm nuts and threaded them onto the 2 plastic nubs at the top of the fog hole. If anyone else does this dont tighten them down to hard or they will strip out.
ALL DONE!
The grill looks sweet too. This process took 2 hours inclulding all the wiring.
The light are neat, they have a Blue halo ring on the outside that I hooked up to the turn signals. The halo flashes too when I make a turn. Of course I used a relay and fusable link also.
Re: My 93 SS EJ20 (10/15 fog light install and black grill)
hmm good idea with the turn signals
Tony
90 LS Spec rio red sold
91 SS rio red R.I.P
90 Mazda Miata
2005 GT SWP
90 LS Spec rio red sold
91 SS rio red R.I.P
90 Mazda Miata
2005 GT SWP
92ss satinsvoice wrote:LOL! that block was like F*** THIS! IM OUT!
mike-tracy wrote:Word. I'd love to get my hands on one of those trannies, but I just can't stomach the cost
Re: My 93 SS EJ20 (12/28 Headlight cleaning and STi exhaust)
I bought the 20 dollar 3M headlight rest. kit at napa today. The kit was easy to use and simple. It attached to my drill. My lights were nasty yellow before this too. While I had the hood open I re-sprayed my TMIC and then finally took pics of the new exhaust.
I did the left first and compared
I did the left first and compared
Last edited by mx4life on Thu Jun 13, 2013 1:55 am, edited 2 times in total.
Re: My 93 SS EJ20 (2\5\11) New JDM door decals!!!!
GOt my new stickers. got some for sale too.
Last edited by mx4life on Thu Jun 13, 2013 1:56 am, edited 1 time in total.
Re: My 93 SS EJ20 (2/7/11 New JDM Door Stickers)
looking good !!!
1993 Subaru Legacy 44B STi 4Cam 16Valve Turbo Intercooled AWD
EJ22T, STi EJ207 DOHC, Vi-PEC (Spare Autronic) @ 426.20HP / 394.94ft lb @ 00psi
Tuned By: Franz Diebold ( DIEBOLD AUTOSPORT ) @ NVauto
EJ22T, STi EJ207 DOHC, Vi-PEC (Spare Autronic) @ 426.20HP / 394.94ft lb @ 00psi
Tuned By: Franz Diebold ( DIEBOLD AUTOSPORT ) @ NVauto
Re: My 93 SS EJ20 (2/7/11 New JDM Door Stickers)
Ordered my Greddy FCD, Hallman boost control, and some longer wires to fit my modded coilpack!
Re: My 93 SS EJ20 (2/7/11 New JDM Door Stickers)
Found some pics today. My old Brat that I built and my CRX that ran in the high 9's.
Built the moon JDM B17 with a JDM b16 cable tranny, LSD, skunk 2 intake. 66 trim snail on a custom stainless exhaust, small 4 core radiator, too much crap to list. And made custom traction bars for the front can see it in the engine bay pic.
Built the moon JDM B17 with a JDM b16 cable tranny, LSD, skunk 2 intake. 66 trim snail on a custom stainless exhaust, small 4 core radiator, too much crap to list. And made custom traction bars for the front can see it in the engine bay pic.
Re: My 93 SS EJ20 (2/7/11 New JDM Door Stickers)
looks like dollops of fun my man! this summer i'm planning to boost a b18b LS that my friend owns.. will probably use an ebay kit and a chipped ecu with crome, but options are open at this time.. he sourced a T04e .60 for 400$ but i think that's far too much.. know of a few people that have good experiences now with the chinese turbos so i figure we'd give one of those kits a shot, and the other hitch is I think the to4e is too big for trying to make 250whp max on the b18.. suggestions otherwise??
'92 Legacy SS 5mt
'91 Tercel, soon to be 4E-FTE powered.
'91 Tercel, soon to be 4E-FTE powered.
-
- Second Gear
- Posts: 380
- Joined: Fri Oct 07, 2011 8:01 pm
- Location: PORTLAND, OREGON
Re: My 93 SS EJ20 (3/23/11) new stuff and pics!
i like. those look like blm roads in eastern oregon
Cheep quality aint good, Good quality aint cheep
1998 legacy l wagon
1988 ford ranger prerunner (my baby)
1994 legacy GT non turbo wagon
1998 legacy l wagon
1988 ford ranger prerunner (my baby)
1994 legacy GT non turbo wagon
Re: My 93 SS EJ20 (New JDM Engine)
Got my new engine ordered.
Last edited by mx4life on Sat Jan 19, 2013 10:11 pm, edited 1 time in total.
Re: My 93 SS EJ20 (New JDM Engine)
Almost done
Last edited by mx4life on Tue Nov 27, 2012 5:20 am, edited 1 time in total.
Re: My 93 SS Legacy Ver3 Ra/Sti Swap Updated 11/25/12
updated pics and mods
Re: My 93 SS Legacy Ver3 Ra/Sti Swap Updated 11/25/12
The Brat above is really cool!
-
- Second Gear
- Posts: 250
- Joined: Sat Aug 13, 2011 7:30 pm
- Location: Vancouver, Wa
Re: My 93 SS Legacy Ver3 Ra/Sti Swap Updated 11/25/12
what kind of horsepower u get with that setup on ur ss
2018 WRX
1991 Legacy Turbo
Sold 1989 Lifted Wagon
Sold 1987 Wagon
1991 Legacy Turbo
Sold 1989 Lifted Wagon
Sold 1987 Wagon
Re: My 93 SS Legacy Ver3 Ra/Sti Swap Updated 11/25/12
How do you like the transmission? That is the exact same one I am thinking of getting for my rally car. Except I would have a DCCDPro aftermarket controller for the center diff.
Re: My 93 SS Legacy Ver3 Ra/Sti Swap Updated 11/25/12
Right now were estimating 300 wheel horse. I have a chipped and tuned custom ECU. I already raced a 05 STi that wasnt stock and beat em. Ill post final numbers when I get my next tune.keithmoilanen wrote:what kind of horsepower u get with that setup on ur ss
Re: My 93 SS Legacy Ver3 Ra/Sti Swap Updated 11/25/12
I love this transmission. Runs a little high on the highway but the 4.44 is awesome. super quick out of turns. I havent got my DCCD hooked up yet, theres a guy here in Bend thats a electical genius that made a controller for DCCD. Has one on his car and says it works great. Only 100 bucks so I might go with that.MConte05 wrote:How do you like the transmission? That is the exact same one I am thinking of getting for my rally car. Except I would have a DCCDPro aftermarket controller for the center diff.
-
- Second Gear
- Posts: 250
- Joined: Sat Aug 13, 2011 7:30 pm
- Location: Vancouver, Wa
Re: My 93 SS Legacy Ver3 Ra/Sti Swap Updated 1/18/13
i dont know if i missed it in the reading but what motor did u use. Year,....
2018 WRX
1991 Legacy Turbo
Sold 1989 Lifted Wagon
Sold 1987 Wagon
1991 Legacy Turbo
Sold 1989 Lifted Wagon
Sold 1987 Wagon
Re: My 93 SS Legacy Ver3 Ra/Sti Swap Updated 1/18/13
All the mods are at the top of this thread. It's a MY98 JDM version 3 RA/Sti swap. Factory they are 320 bhp per an unspoken gentlemans agreement. If you want I can link ya the specs and info on it.
-
- Second Gear
- Posts: 250
- Joined: Sat Aug 13, 2011 7:30 pm
- Location: Vancouver, Wa
Re: My 93 SS Legacy Ver3 Ra/Sti Swap Updated 1/18/13
Hmm, are u satisfied with this set up?
2018 WRX
1991 Legacy Turbo
Sold 1989 Lifted Wagon
Sold 1987 Wagon
1991 Legacy Turbo
Sold 1989 Lifted Wagon
Sold 1987 Wagon
Re: My 93 SS Legacy Ver3 Ra/Sti Swap Updated 1/18/13
So far yes. Its got way more HP now and I am almost where I want the engine power to be at for a daily. Gunna do bigger injectors and rails then Im done with upgrading the engine. move on to cosmetic and suspension. Plus when I open the hood peoples reactions are great when they see the swap.