Basically the gist of the business plan is I'm going to put my spannering skills to work on strangers cars (shock horror!) And will be wrecking cars locally too. The bulk of my business is going to be local, stocking new parts, used parts, and doing some mechanicing/car importing on the side. The offshoot of this is I will be getting JDM parts in stock fairly frequently (going to be very slow in the start until I have a workshop and premises to wreck cars on), and I want you guys to enjoy these bits as much as I do! The focus is going to be on the older cars, BC/BF, BD/BG, GC/GF and so on. BH and the odd 4th gen will also come in stock. And I want to stock the weird bits you cant easily get on ebay, like interior lighting controllers, with their associated key ring lights and puddle lights, or keyless entry setups and that sort funky stuff!!! And I will ALWAYS be open for requests, name what you want, I can get it. Bulk of the business will be lights and grilles and that sorta thing too.
So, let's get started, Prices are all in USD, all freight quotes are off the NZ post website, and occasionally cost way more, I will try absorb discrepancies from what's posted, but this can cause delays if the local post office choose to be difficult (they are not freindly in queenstown).
Current stock list:
BC/BF/BJ
JDM Clusters.
Made to order, price varies on spec, pictured is an example of one made for Blighter, with the rather rare 240K speedo, and 9K tacho. 90% will only have 180k speedo's, and 8K tacho's, and most will be automatic. May take some time to find manual clusters, will take a LONG time to find other 240K speedo's, so first in first serve. Milage can be set before shipping, note milage is in KM's only, and will be converted to suit (e.g. if you ask for 60,000 miles, I will set 100,000 KM on the cluster). Don't forget to mention regarding the error lights if you want pre-face-lift boxes or facelift pills. Pictured is an example of facelift pills. Also, you can have either "LO" for hi-lo manual boxes, or instead "Cruise set" for cruise control, no cluster I have seen has both. "LO" clusters also do not have a cat temp warning light.
A picture of the back of your factory cluster is required too, to find what tacho's are compatible (there are three printed circuit types for JDM, identified by their colour, blue, green or red), and some 9K's have a 7-pin wiring setup, as apposed to the standard 5-pin. Note, circuits don't have to match, you can re-wire to convert to a different colour circuit. without re-wiring, different colours will not work.
For a standard 180K/8K/Auto, $40USD. For a 240K/9K/Manual $200. Anything in between considered. You name what you want, I can build it and price it up! Freight $30
![Image](https://farm9.staticflickr.com/8704/16683922129_6d4cc6fcae_o.jpg)
BC-0001F by Reuben Horsley, on Flickr
Pre-Face-Lift JDM Glass headlights
1 pair in stock
$100/pr, Freight $120
![Image](https://farm8.staticflickr.com/7644/16869041931_aa28c454cf_o.jpg)
BC-0003FL by Reuben Horsley, on Flickr
![Image](https://farm9.staticflickr.com/8718/16683921989_e41da36665_o.jpg)
BC-0003FR by Reuben Horsley, on Flickr
![Image](https://farm9.staticflickr.com/8725/16683921969_94f2448bd5_o.jpg)
BC-0003RL by Reuben Horsley, on Flickr
![Image](https://farm8.staticflickr.com/7626/16662741347_d90d799036_o.jpg)
BC-0003RR by Reuben Horsley, on Flickr
Pre-Face-Lift NZDM Glass headlights - only discernible difference is electrical connectors used, and the H4 socket boot.
1 pair in stock
$100/pr, Freight $120
![Image](https://farm8.staticflickr.com/7622/16662741237_997fc9b99f_o.jpg)
BC-0004FL by Reuben Horsley, on Flickr
![Image](https://farm8.staticflickr.com/7632/16247682214_9f33cbf0e2_o.jpg)
BC-0004FR by Reuben Horsley, on Flickr
![Image](https://farm9.staticflickr.com/8738/16682427508_1791005322_o.jpg)
BC-0004RL by Reuben Horsley, on Flickr
![Image](https://farm8.staticflickr.com/7283/16844177546_7a1fdfbd8a_o.jpg)
BC-0004RR by Reuben Horsley, on Flickr
NZDM Pre-Face-Lift side markers. These appear to be similar to JDM, but without the lens poking out, due to NZDM PFL's getting fender sidemarkers unline JDM.
1 pair in stock
$40/pr, Freight $45
![Image](https://farm8.staticflickr.com/7637/16844177506_c2839e8590_o.jpg)
BC-0005F by Reuben Horsley, on Flickr
![Image](https://farm8.staticflickr.com/7611/16869041641_86920b553f_o.jpg)
BC-0005R by Reuben Horsley, on Flickr
ECU: E4 - Price $120, Freight $45
Engine: EJ20G
Stock On Hand: 2
Part Number: 22611AA740
Model: Legacy GT, A/B rev
AWIC Control: Yes
EEPROM Socket: No (Looks like one can be added though)
Bit: 8-bit
Given Crank HP: 200ps
Injectors: Grey top
AFM: Green sticker
Map: 2-bar
![Image](https://farm9.staticflickr.com/8754/16851916155_ced521e425_o.jpg)
IMG_9990 by Reuben Horsley, on Flickr
![Image](https://farm8.staticflickr.com/7620/16665778569_ae5839b394_o.jpg)
IMG_9992 by Reuben Horsley, on Flickr
![Image](https://farm8.staticflickr.com/7285/16826051196_010d7850bf_o.jpg)
IMG_9993 by Reuben Horsley, on Flickr
![Image](https://farm8.staticflickr.com/7640/16665779079_5f2b6e957a_o.jpg)
IMG_9994 by Reuben Horsley, on Flickr
BD/BG/BK
BD/BG Projector Headlights. Including pigtail. Not including bulbs (can supply at extra cost - just H1's and H3's). Sadly these are hard to come by in good condition these days, so I am picking up smashed ones, and singles as I go, to make complete pairs available. I will always list if I have spare lefts or rights.
1 Pair in stock
1 LH in stock
Spare parts available from smashed lenses in stock
$240/pr, Freight $140
$120/single, Freight TBA - est $80
![Image](https://farm8.staticflickr.com/7604/16870044695_bf98e4afed_o.jpg)
BD-0005FL by Reuben Horsley, on Flickr
![Image](https://farm8.staticflickr.com/7650/16683921829_ff3e597cc4_o.jpg)
BD-0005FR by Reuben Horsley, on Flickr
![Image](https://farm9.staticflickr.com/8563/16844177266_2304d8bfc0_o.jpg)
BD-0005RL by Reuben Horsley, on Flickr
![Image](https://farm8.staticflickr.com/7281/16250074813_effa670ef2_o.jpg)
BD-0005RR by Reuben Horsley, on Flickr
BD Pre-face-lift clear lense tail lights
1 pair in stock.
$140/pr, Freight $60
![Image](https://farm8.staticflickr.com/7585/16773149045_ff867644b2_o.jpg)
![Image](https://farm9.staticflickr.com/8603/16153219563_80209a40aa_o.jpg)
![Image](https://farm8.staticflickr.com/7588/16772072392_1147f29be6_o.jpg)
![Image](https://farm8.staticflickr.com/7601/16153219343_a666bb941b_o.jpg)
BD/BG Clusters. Not nearly as customisable as first gens. These will either be available in GT/GTB Auto, or GTB manual. GT/GT auto will have the redline at 7K, GTB manual at 7500rpm. Occasionally 240K STi clusters do pop up. Note unlike first gen's, manuals still have the gap for the auto tree, they are just blank though.
Stock "BD-0004" has standard bubbling around screws.
$80, Freight $30
![Image](https://farm9.staticflickr.com/8736/16682427378_116a630851_o.jpg)
BD-0004F by Reuben Horsley, on Flickr
![Image](https://farm9.staticflickr.com/8687/16250074973_b8a5b8307a_o.jpg)
BD-0004FC by Reuben Horsley, on Flickr
BD/BG Brushed alloy cluster faceplate
$40, Freight $20. Freight free if purchased with a cluster.
![Image](https://farm9.staticflickr.com/8633/16870044835_40324c39d8_o.jpg)
BD-0004IN by Reuben Horsley, on Flickr
BD/BG Side markers, black plastic unpainted. Painted options available from time to time.
2 pairs in stock.
$30 USD/pr, Freight TBA (Estimate $15 odd)
![Image](https://farm9.staticflickr.com/8689/16773148595_7335a7f229_o.jpg)
BD/BG Pre-facelift Fake woodgrain interior *incomplete*. As seen on 250T's and Outbacks - Suits RHD only!
1 Set in stock.
$40 USD/set, Freight TBA (estimate $20).
What's missing? The air-con and stereo surrounds! The stereo surround was broken, and the aircon surround I donated to a friend in need, and was also a bit broken. To whomever buy's this set, if I find the rest of the set, yours for the cost of freight.
![Image](https://farm8.staticflickr.com/7286/16747283846_6e51228388_o.jpg)
![Image](https://farm8.staticflickr.com/7283/16585589048_9f5101f01f_o.jpg)
More stuff added all the time, keep checking back!