91/94 turbo Legacy parts, almost anything you need

Blackbart · Post by **Blackbart** » Wed Apr 11, 2007 7:15 pm

I have quite a bit of turbo Legacy parts here, "almost" anything you need except motors and 5MTs.
Give me a list and I will give you a good deal.

totech · Post by **totech** » Wed Apr 11, 2007 8:23 pm

Sedan power antennae?

IronMonkeyL255 · Post by **IronMonkeyL255** » Wed Apr 11, 2007 9:15 pm

Do you have a 3.9 LSD rear diff?

BTW, I like the Nyaru avatar.

Post by **DLC** » Wed Apr 11, 2007 9:19 pm

I just added that avatar, it popped into my head as the perfect match for vendor status

Maneki Neko

Adam West · Post by **Adam West** » Wed Apr 11, 2007 11:19 pm

How about JDM/OEM foglights and foglight switchplate?

92whitelegacy · Post by **92whitelegacy** » Wed Apr 11, 2007 11:29 pm

white 92 drivers fender, and turn signal?

92whitelegacy · Post by **92whitelegacy** » Wed Apr 11, 2007 11:29 pm

92 turbo bumper?

NuclearBacon · Post by **NuclearBacon** » Thu Apr 12, 2007 12:24 am

jdm fog lights?!!?

Blackbart · Post by **Blackbart** » Thu Apr 12, 2007 12:25 am

Boy, this is a tuff crowd! Good thing I said "almost" everything.

totech: I have been saving a spare antenna but will part with it for $40.

IronMonkeyL255: I have a 3.90 open rear for $50. There is a 3.90 LSD in your wanted thread, if you don't buy it I will!

Adam West: I have the OEM JDM fogs and swith for $100

92whitelegacy: I have a 92/94 turbo bumper but shipping will be kinda pricey due to size not the weight. I have the turn signal with a broken tab, repairable, $5. No white fender.

Plus shipping from PA 18824

Adam West · Post by **Adam West** » Thu Apr 12, 2007 1:18 am

BB, cool. i'm all over it - can you send pics to me so i'm clear on condition? Please send to...

adamganzpr AT hotmail.com

If you want to figure shipping to 98144 and bill me through paypay at that addy that would be terrific too.

Cheers,
Adam

madkow007 · Post by **madkow007** » Sat Apr 14, 2007 2:05 am

Hi...Any drivers fender in ok to good shape?

Blackbart · Post by **Blackbart** » Sun Apr 15, 2007 3:25 am

madkow007 wrote:Hi...Any drivers fender in ok to good shape?

I have a couple of driver fenders, shipping can be a pain, where are you located?

madkow007 · Post by **madkow007** » Mon Apr 16, 2007 1:35 am

Blackbart wrote:
madkow007 wrote:Hi...Any drivers fender in ok to good shape?
I have a couple of driver fenders, shipping can be a pain, where are you located?

Out here in wisconsin...zip 54488...DHL may be the chepest.
How much are you looking to get for them?

sybir · Post by **sybir** » Mon Apr 16, 2007 3:35 am

Driver's sunvisor in grey?

boro · Post by **boro** » Mon Apr 16, 2007 3:50 am

do you have PCV pipes and hoses or no engine parts at all?

temjin · Post by **temjin** » Tue Apr 17, 2007 3:28 pm

How much for the ECU and engine harness

Drakar · Post by **Drakar** » Tue Apr 17, 2007 4:40 pm

Interested in the fogs as well, got another set?

Blackbart · Post by **Blackbart** » Tue Apr 17, 2007 6:25 pm

sybir: I will check on the visor, pretty sure I have a good one here.

boro: I have all the PVC engine plastic parts, got a list of what you need?

temjin: PM sent about the ECU and harness, got them.

Drakar: I have another set of fogs, PM coming

know1 · Post by **know1** » Wed Apr 18, 2007 11:16 am

do you have any trunk badges for a 94 SS?

I think they say Subaru on the left and Turbo AWD on the right

Blackbart · Post by **Blackbart** » Wed Apr 18, 2007 3:05 pm

know1 wrote:do you have any trunk badges for a 94 SS?

I think they say Subaru on the left and Turbo AWD on the right

I have a box with some badges in it, so I went out to look at my car to see what they look like, they are gone!! I have three 92-94 SS's here that are now badgeless. Funny how this stuff happens. I know they fall off, I closed my trunk one day and heard one hit the ground, that one is in my glove box. The other ones are a mistery.

madkow007 · Post by **madkow007** » Wed Apr 18, 2007 11:56 pm

madkow007 wrote:
Blackbart wrote:
madkow007 wrote:Hi...Any drivers side fenders in ok to good shape?
I have a couple of driver fenders, shipping can be a pain, where are you located?
Out here in wisconsin...zip 54488...DHL may be the chepest.
How much are you looking to get for them?

Looking to buy both fenders.
Also looking for a working heater/AC control thing for a 90 Legacy

Blackbart · Post by **Blackbart** » Fri Apr 20, 2007 7:06 am

I finally got a chance to check out my fenders, I only have one 90/91 and it needs work. Driver side, dent and minor rust. Not good enough to sell.
I have a few hvac controllers, these are the later units. The harness plug got changed smewhere in 91 (?) Mine fit 92/94 and some 91's.
Not sure if the fit some 90's or not.

madkow007 · Post by **madkow007** » Fri Apr 20, 2007 11:10 am

Blackbart wrote:I finally got a chance to check out my fenders, I only have one 90/91 and it needs work. Driver side, dent and minor rust. Not good enough to sell.
I have a few hvac controllers, these are the later units. The harness plug got changed smewhere in 91 (?) Mine fit 92/94 and some 91's.
Not sure if the fit some 90's or not.

It looks like they changed them at some point..not sure when. but the one I did find local wouldn't fit. The plug on the back was to small and didn't have the other end so I could see if it would fit that way. The wifes and mine are both 90's so I can't compare. :smt073

Blackbart · Post by **Blackbart** » Fri Apr 20, 2007 2:29 pm

If you can send me a PM with your email address I can send you a pic of the harness plug on the ones I have, the colors will be different also.

sybir · Post by **sybir** » Sat Apr 21, 2007 12:33 am

Blackbart wrote:sybir: I will check on the visor, pretty sure I have a good one here.

Cool, thanks, let me know.

legacycentral bbs

A forum for 89-94 BC-BF(BJ) Legacy Owners and Fans

91/94 turbo Legacy parts, almost anything you need

91/94 turbo Legacy parts, almost anything you need