Page 1 of 1
Spare turbo heads and intakes
Posted: Mon Jan 02, 2017 6:51 pm
by fastwagn
Hi guys, finally got my 91 legacy the swampfox back on the track with it's forged 22 bottom end and sti shim under bucket heads. Now, I am moving my shop (turbotime in Cary now apex NC), and need to shed some spare parts. I have a pair of hydraulic ej20g heads as well as a set of 2.2 sohc turbo heads, lastly, two 2.2 turbo intake manifolds, one with wiring, one without. If you have questions or need pics feel free to pm or post.
Re: Spare turbo heads and intakes
Posted: Tue Jan 03, 2017 10:06 pm
by fastwagn
Don't be shy, I would rather sell this stuff for scrap prices than actually have to scrap it.
Re: Spare turbo heads and intakes
Posted: Wed Jan 04, 2017 6:39 am
by Pntaste4evr99
Where are u located?
Re: Spare turbo heads and intakes
Posted: Wed Jan 04, 2017 8:09 am
by mike-tracy
^^north carolina
Re: Spare turbo heads and intakes
Posted: Wed Jan 04, 2017 2:28 pm
by fastwagn
Yep, Apex, North Carolina. But have a UPS corporate account, so shipping is not an issue.
Re: Spare turbo heads and intakes
Posted: Wed Jan 04, 2017 3:10 pm
by smh0101
The manifold that has wiring... Is it wiring for a 91/92 or a 93/94?
Are they hydraulic Legacy RS heads or 1st gen HLA WRX heads? (Legacy RS ej20g heads have lines on the valve covers above and below the spark plugs, WRX ones only have them above the Spark Plugs.)
Re: Spare turbo heads and intakes
Posted: Wed Jan 04, 2017 3:16 pm
by fastwagn
Wiring is from a 91/92 I believe
Heads are 94 legacy RS
Re: Spare turbo heads and intakes
Posted: Wed Jan 04, 2017 7:48 pm
by mike-tracy
1991 SS has different plugs. 92-94 is all the same.
Re: Spare turbo heads and intakes
Posted: Sat Jan 14, 2017 3:37 pm
by fastwagn
Bump, anyone need these? Seriously, I don't want to scrap them but I have to start slimming down stored parts.
Re: Spare turbo heads and intakes
Posted: Mon Jan 16, 2017 3:26 am
by Imprezafan93
I pmed about the dohc heads