legacycentral bbs

Posted: **Mon Oct 21, 2002 6:16 pm**

Is there any one on this board that is aware of companies that make tasteful bodykits for the legacy sedan. I am having trouble finding one. I need a bumper that I could fit a large fmic. I want to get rid of the black and chrome and also a side skirt. thanks, kelley.

Posted: **Mon Oct 21, 2002 6:57 pm**

There really isn't anything out there. There may be some odds & ends floating around in Japan.....but between the shipping and cost of the parts.....I don't think it's worth it.

Posted: **Mon Oct 21, 2002 7:10 pm**

that's not what I would wanted to hear. if you know of some companies no matter the cost. please let me know.

Posted: **Mon Oct 21, 2002 7:41 pm**

I have seen a bc legacy with a fmic on stock bumper. it can be done with just a little cutting to the bumper beam and bumper. custom piping of course would have to be made up. I don't think you would be able to get rid of the black trim unless you got a new front and rear bumper. then you would have to have the side molding shaved. all that would cost a fortune. I would just try and search some japanese sites and see if they have anything.

Posted: **Mon Oct 21, 2002 10:36 pm**

i have seen that same car. the cobb fmic should fit in the stock bumper, but I want a different look. so I would appreciate any info on body kits. thanks, kelley

Posted: **Tue Oct 22, 2002 3:42 am**

I honestly don't know of any vendors that have anything. One of the manufacturers is hippo sleak or something like that......uumm....The japanese Hyper Rev mag. may have some info. I know some past issues had pics of certain kits. But I'm not sure if you can get them.

Dave may know.

Posted: **Fri Oct 25, 2002 12:44 am**

Very little exists for the 1st gen legacy. Supposedly things do exist in Japan, I have only seen an aftermarket front bumper lip fitted to a Japanese Turbo sedan. BUT, in Austrailia and Europe legacy turbo's (Liberty RS's in Austrailia) came with plastic side skirts and rear bumper lips stock from the factory (along with an improved front bumper that luckily we here in north America got too). Both can be purchased from Wreckers in both areas. I got quoted 80 Austrailian dollars for each side
skirt and 120 for the rear bumper lip. The rear bumper lips will bolt onto the bumper, whereas the side skirts will have to taped on or clip holes cut into the rocker panels on our US/Canadian Spec Legacys.

Hope this helps,
Mark

Posted: **Fri Oct 25, 2002 1:12 am**

I have heard that 2nd generation (95-99) bumpers will fit. is there anbody that is aware of this and how well they bolt up. thanks, kelley

Posted: **Tue Oct 29, 2002 6:38 am**

kelley wrote:I have heard that 2nd generation (95-99) bumpers will fit. is there anbody that is aware of this and how well they bolt up. thanks, kelley

no they do not fit. i ordered the rear lip it sorta fit but didnt look like it belonged. oh well, you can order over seas for a rs bumper........Jim

Posted: **Tue Nov 26, 2002 4:39 am**

LegacyT wrote: I got quoted 80 Austrailian dollars for each side
skirt and 120 for the rear bumper lip.

Where exactly did you get this quote?

Posted: **Tue Nov 26, 2002 12:10 pm**

It was a while back but it was either:

http://www.subspare.co.nz
http://www.justsubaroo.co.nz
or
http://www.aableparts.co.nz

Hope this helps,
Mark

Posted: **Wed Dec 11, 2002 11:52 pm**

I got some pics of the aerotech body pieces. there pretty bad pics so I can't tell if I like it. the pics are primered. looks pretty agressrive imho.

Posted: **Thu Dec 12, 2002 12:45 am**

Are these aerotech kits of the BC Legacy? Could you post the pics?

Thanks,
Mark

Posted: **Thu Dec 12, 2002 1:18 am**

yes. I don't think you can post pics and I don't know how to attach pics.

Posted: **Thu Dec 12, 2002 12:15 pm**

The moderators will help you out if you fire them an email with the pictures

Mark,

Posted: **Thu Dec 12, 2002 3:34 pm**

send me the pics, I'll host them so you can post them.....hey that rhymes

Posted: **Mon Mar 03, 2003 3:08 am**

just have a look at www.aerotech.co.nz in the subaru bodykits area

Posted: **Mon Mar 03, 2003 12:03 pm**

That site only shows the 2nd Gen Legacy with a bodykit.

Mark,

Posted: **Mon Mar 03, 2003 8:36 pm**

i have some pics of my car (with front lip and wing) but cant put them up, can anyone help, it's a 92 shape legacy

Posted: **Mon Mar 03, 2003 9:39 pm**

If you send me a pic I'll host it for you. Just email it to me.

-Brian

Posted: **Wed Mar 05, 2003 6:29 am**

Here ya go!

-Brian

Posted: **Wed Mar 05, 2003 6:48 am**

..........that is one *amazing* looking car!!!!!!!

very nice job. Jeez im jealous

Posted: **Wed Mar 05, 2003 9:50 am**

Thanks eastbaysubaru for posting it for me

Posted: **Wed Mar 05, 2003 5:54 pm**

No problem. I feel lucky being the first to see it as it's one of the best examples of the BC Legacy.

-Brian

Posted: **Sun Nov 16, 2003 10:29 am**

volt wrote:just have a look at www.aerotech.co.nz in the subaru bodykits area

Now this is what i'm taking about will this fit on my 95 Legacy L 4 dr sadan

I love it I could see my car painted all black with that body kit

frank