legacycentral bbs

Also, I bought two different repair manuals for the first gens. They'll be here after the weekend and hopefully that will give me some info.

I'll have to pull the controls soon and check the solders. Thanks for that!

If you ever do come to Iceland the Subaru culture is crazy over here. Come to Neskaupstaður (East Iceland) and I'll show you around the place

Thank you for the diagrams :) I found another forum post about the brake lights and horn being the same fuse and if neither worked all you needed was to replace the fuse. I did that and... NOTHING! I even tried putting a higher rated fuse instead but still nothing. Man this car is starting to piss m...

the clunking has for some reason disappeared. Might have to do with the clutch still breaking in.

I have replaced the relay, and nothing changed yet again.

Should have maybe mentioned this before but the car is full EUDM, since I live in Iceland. Might change things, might not.

The relay or the resistor? Because I switched the resistor and that did nothing.

So I have been trying and trying to get the heater controls to work. But nothing WORKS. I pulled the dash and switched heater cores in January 2016, got it all back together fine and dandy, suddnely one day the blower motor doesn't blow air... I pulled the blower motor and hooked it up to a battery,...

Haha, thanks all of you for the help. Gotta love this forum

I will test the factory bleeding order in a few days and we shall see if the air goes away

It sounds a lot like the noise comes from the driveline. Do you think it might be because of the fact that the push bearing is sitting on a very worn rod?

Thanks for the tips.

I've already gone through and bled the brakes on every poont multiple times, always with the car running though.

Also I have no Idea what the factory bleed order is.

Did the brakes 2 weeks ago and just now got to finishing the master cylinder bench bleed I had to do because I accidentally drained the reservoir.

So I have a 92 Sedan which I recently did a gearbox change on. So now there is a completely new clutch package on the car and all. BUT. When I downshift and release the clutch quite harshly there is this strange clunking. It never happens while driving normally and it gets less aggressive when the c...

thank y'all!

I love this forum

Hey, does anyone know where I can get my hands on some bushings fr the rear control arms?

Rockauto doesn't seem to have them and I'm lost...

aw man. I'll do that.

Thank you!

So I accidentally completely emptied the brake fluid reservoir and now there seems to be air on the whole system, even though I did tap air off all the brakes.

Any ideas?

Alright, help from the local mechanic informed me about the hill holder. It was too tight after a gearbox change. Thank you all for helping though!

So I have this 1992 legacy and I just redid this calipers and put brand new rotors/pads on, and the left caliper/drivers side keeps sticking (the rotor wont turn at all). :( If I let off pressure by bleeding while not pumping it lets the rotor go and it is free again. I really have no idea what is g...