legacycentral bbs

I am having issues finding the answer to this question on my 96 legacy l will fwd rear struts work on my awd legacy?
Thanks

I'll take a black one let me know were to send the 1$

Yah I'm pretty sure its a tire issue cause after swaping a set of tires from 94 it pulls left instead of right.

Thanks for the tips

Pm sent

I checked all the areas that log1call pointed out and none were an issue so I think I am back to an allignment shop. I also swaped the tires from my 94 sedan to my wagon so will see if that makes a difference.

I know tire presures are all at 30lbs but I will check the other 3 today. No I dont have a print out from the allignment it was about 6-8 months ago.

Yes and yes had the car in air and and I was using a gauge that mesures horizontal. The car still pulls right all the time after the tire rotation.

Swaped the tires so well see if the pull changes. During the rotation I put an angle finder on the strut inbetween the bottom of the spring and the top bolt on the bottom. I dont know how reliable this is but the right side was 6 degrees and left was 3 degrees.

Yep allready did that the alignment shop I went to did both. Im hoping new tires will fix the probem it just a big gambel.

Hey all I was wondering if there is a way to check camber with a magnetic angle finder? On my 96 legacy wagon the steering is way out I have had to the alignment shop numerous times and they said it will stop pulling right when I get new tires. Looking at my old tires that still have some life on th...

How much for the convertor??

Head gasket? I checked for the normal mixing of fluids and they looked good to me? After closer evaluation I have leaky valve cover gaskets so I need to replace those first and clean it up so I actually have chance to find the coolant leak.

Were would the heater core leak from, and I checked the heater hoses, and I think renting a pressure tester would be worth my time.

So I have coolant leak on the bottom of the motor the begining of were I can see it is on the rack, and on the center diff. I check upper lower rad hoses bi pass hose, coolant temp sensors, heater core hoses and see nothing wet. Its weird cause it is pooling on the tranny cross member and under the ...

Could you give a little info on the trany 3.9 or 4.11, year, and how many miles are on it. Thanks

Hey all I have a 96l wagon a daily beater and tranny is pretty bad it is a 4.11 4eat with the code of tz102zabba. Can I put any 4.11 tranny in the car and the axels will match up? Also would I have to cange the tcu?
Thanks

Thanks I will defitly give manley a call and see what they say. I also took the rods to the shop I have my crank worked on and they said that these were the right rods to the crank? I have the retainers being shimed on the todo list.

I think I have the one your looking for its on the passanger side right? Pm me we can talk specfics.

Hi all was wondering if you knew any places that could mod yellow top fuel injectors for cheap? I am looking to get 800cc out of the stock side feed sti injectors. The cheapest I found so far is 230$ at agency power. I have tried rallytek and cobb and they cant do it. So any sugestions would be welc...

Yah it was a shamful day for suby fans. This is part of my motivation for doing this to have a fast subaru. Your more than welcome to come and take a look theres not much to look at but there will be in a month or two.

Well to say the least I am fed up with all my dsm friends going 12's like its nobodys problem. I want to be able to run 12 any time I want to. So I said good buy to my ej22 with 143,xxx on it and said hello to a phase 1 ej25. After not being able to stop a misterious oil leak and a few other issues ...

Ill vouce for Tim he gets the stuff sent out. I have had 5 plus transactions with him and everything has come out fine and I got my parts. From ss to lgt parts he has really helped me out numerous times. Seriously buy parts from him with confidence.

pm sent timing belt cover??

pm sent