Search found 87 matches
- Thu Apr 10, 2008 4:38 pm
- Forum: Turbo
- Topic: Do i have a turbo or not?
- Replies: 11
- Views: 1445
- Mon Mar 10, 2008 12:08 am
- Forum: Engine
- Topic: Ej20g Vs. EJ25 DOHC drilled and tapped pics
- Replies: 11
- Views: 4588
- Fri Jan 04, 2008 7:33 pm
- Forum: Engine
- Topic: Subaru TecNICO International AGAIN!!!!!!!
- Replies: 61
- Views: 7869
yups, I'm sticking to my EJ22 crank. I like the smoothness. Looking at rods made for the USDM STi 2.5L. They share the same rod length, there for I can put them in with forged pistons from CP for my 2.2L and be all set to go. I was like....if I'm not shooting for more, should I just pick up some OEM...
- Fri Jan 04, 2008 1:16 am
- Forum: Engine
- Topic: Subaru TecNICO International AGAIN!!!!!!!
- Replies: 61
- Views: 7869
well... my setup should be making close if not more than 300whp on pump. WRX swap w/ stock EJ22T shortblock. EVO3-16G-8cm^2, headerback, turbo inlet, eBay TMIC, Wlbro FP, uncapped and rescaled stock WRX injectors. The WRX heads are ported to mimic the JDM big ports. SO THIS MEANs, I can go buy rods ...
- Wed Jan 02, 2008 12:51 am
- Forum: Drivetrain
- Topic: Gear Ratio and LSD info
- Replies: 50
- Views: 33784
- Wed Jan 02, 2008 12:48 am
- Forum: Engine
- Topic: Subaru TecNICO International AGAIN!!!!!!!
- Replies: 61
- Views: 7869
- Wed Dec 19, 2007 7:13 pm
- Forum: Engine
- Topic: Subaru TecNICO International AGAIN!!!!!!!
- Replies: 61
- Views: 7869
- Thu Dec 13, 2007 8:44 pm
- Forum: Drivetrain
- Topic: 06 WRX Swap, Slip Slip
- Replies: 3
- Views: 686
ouch, I TRIED the '06 WRX clutch setup. It SLIPPED as well with my '00 OBS tranny mated up to it. It just DIDN'T work.... I swapped it back out and rounded off 3 of the 6 pucks on the ACT disc and put my Exedy stg1 pressureplate and my stock flywheel on. I NOW have an ACT heavy duty pressureplate on...
- Thu Dec 13, 2007 8:41 pm
- Forum: Drivetrain
- Topic: Gear Ratio and LSD info
- Replies: 50
- Views: 33784
I don't know if you guy have been reading up on my posts over on NASIOC or RS25. These are ALL 5-SPEEDs. 90-94 Legacy 5spd: 4.111FD 95-99 Legacy 2.2L; excluding 2.5L: 3.900 96-99 Legacy 2.5GT/Outback 2.5L: 4.111 93-95 Impreza 1.8L: 4.111FD 96-01 Impreza 2.2L: 3.900 98-01 Impreza 2.5L: 4.111 02-03 Im...
- Thu Dec 13, 2007 7:56 pm
- Forum: Turbo
- Topic: 07 wrx question, for a friend, still with problems
- Replies: 30
- Views: 3869
- Thu Dec 13, 2007 7:49 pm
- Forum: Turbo
- Topic: Perrin rotated mount GT30r
- Replies: 48
- Views: 5615
- Thu Dec 13, 2007 7:40 pm
- Forum: Turbo
- Topic: Stock WRX TD04 turbo on a Legacy Turbo
- Replies: 47
- Views: 8697
you can get good power out of the TD04L for daily driving. I did this swap into my Impreza and had full headerback exhaust, WRX TD04L/TMIC, TXS FCD, TXS MBC, boosting avg 15psi and at 15psi I made 178whp 244wtrq on a mustang dyno. The torque drops off after its peak at 3600rpms. HP holds above 150wh...
- Thu Dec 13, 2007 2:32 am
- Forum: Turbo
- Topic: TurboXS Fuel Cut Defender?
- Replies: 22
- Views: 3302
- Sat Nov 24, 2007 5:49 am
- Forum: Engine
- Topic: do ej25(sti) rods fit on ej22?
- Replies: 22
- Views: 11770
- Fri Jul 20, 2007 5:17 am
- Forum: Turbo
- Topic: Calling HKS SSQ BOV owners
- Replies: 6
- Views: 1254
The TUrboXS one is really simpole to setup. Follow the steps and you're all good. I wired it to the ECU's MAP, power and ground. I have the EJ22T swap into my Impreza. Running WRX fuel pump and TD04L w/ TMIC. boosting 15psi on a Mustang Dyno net me numbers 178whp, 244ft lbs of torque. On nights doin...
- Mon Jul 16, 2007 5:54 pm
- Forum: Turbo
- Topic: BOV Question
- Replies: 14
- Views: 2494
just so you guys know i have a HKS on my eclipse and what everyone is saying about not leaking is true, it really is a great bov..the whistle is awesome to me i love it but you can take out the little silver insert at the tip and it will just sound like a regular bov...just get a small hex key and ...
- Thu Apr 26, 2007 6:22 pm
- Forum: Engine
- Topic: EJ22T/DOHC first step help
- Replies: 3
- Views: 694
how's that wiring on the intake manifold work? What YEAR intake manifolds are you guys using? All the '96 have LARGE ports whereas the 97-99 have skinnier ports. I'm still wondering how they BOTH look like and if the '98 is just quinched/bottlenecked when the manifold turns down to the heads, becaus...
injectors needed, ya? because I'm just running a simple TD04L w/ TMIC, but keeping boost at 14psi just to be safe because I don't want to go lean. On cools night it creeps to 17psi in middle 4th, and when going into 5th. But boost drops back down when the RPM goes up to 5000rpm. It's just when I shi...
I have my FCD in. I set the cut at 16psi. My boost is set at 14psi....at night it does creep to 17psi at times...but holds about 15psi. daytime it is running 14psi in 4th gear. nice to have a safety margen. Whenever the boost hits 16psi, the MAP solenoid clicks when you are anywhere above 1000rpm. A...
- Tue Apr 24, 2007 5:53 pm
- Forum: Turbo
- Topic: what to do?
- Replies: 3
- Views: 821
- Wed Apr 11, 2007 6:14 pm
- Forum: Engine
- Topic: Do I use throttle body cleaner to clean the MAF sensor?
- Replies: 10
- Views: 2402
- Mon Apr 09, 2007 5:35 pm
- Forum: Intercooling
- Topic: tmic with perrin bov??
- Replies: 7
- Views: 2143
- Mon Apr 09, 2007 4:37 pm
- Forum: Turbo
- Topic: wastegate chatter
- Replies: 10
- Views: 2119