legacycentral bbs

I just don't get it :cry: I pull'd out the valve-body and took it apart to see if anything looked defective and I actually found two of the spring-valves that seemed to be stuck. Took them apart, cleaned everything and put the valve-body back together again. Confident that I had found the fault I as...

No, - there is no flashing in the power light at startup and no current errorcodes on the TCU either, and I had the oil changed at a Subaru dealer in january...

Finally I got around to check the TCU levels and both the inputs and the outputs seems to be whitin specs. I also tried disconnecting the solonoids and the sensors one at the time to see if the TCU would report an error, and it did... After analyzing and reading a bit I now understand that it is act...

I just talked to a local Tranny Guru and he is also thinking that it might be an elektrical problem. Exept that he don't like that it is breaking when 1st. is selected... Also he says that if any wires where broken, it would be seen as an error code on the TCU. I'm going to check the voltage levels ...

I checked both connectors an they seems ok, but anyway I disconnected both and checked the inside too, and they looks like new, no sign of bad connections...
I also reset the TCU by taking the fuse out for about 20 min.

And I still have the problem

Hi there. I've been ghosting this site for quite some time now and let me start by saying thanks for all the great help and ideas that You all are posting :D But now it is my turn to have a major problem, - i think ... After driving normaly for about two hours on the highway i got in to a small town...