legacycentral bbs

Thanks for the responses!! Ive definitely got more then $10k it but you guys are right. I doubt it would fetch much more then that in an unfinished state. However at this point it wouldn't take an offer much more then that for me to unload it. When I first started the project I didn't have kids or a...

I have a Red 99 Legacy GT with a fully built stroker motor and turbo kit installed with an STI 6 speed and 4 pots ready to go in. It just needs coilovers and STI wheels/tires to be completed. My wife and I just signed papers to build a house and I have two kids. It will be at least a year before I w...

VF39 is the stock STI turbo but it isn't ball bearing. The VF34 is an older JDM stock STI turbo and is ball bearing. I was just reading about someone that did VF34 swap into their ss. You will definitely need to swap injectors. I would think the STI side feeds would work. I bought a set of 740cc sid...

A bright shiny Greddy Emanage Ultimate arrived the other day for use in my 99 Legacy GT.

I need an ECU pinout diagram to match everything up and start splicing. Can anybody send me a link or shoot me an email w\ it attached?

Thanks

Brad

http://i20.ebayimg.com/06/i/08/24/6d/0f_3.JPG Qauntity: 2 http://i8.ebayimg.com/04/i/08/2d/3b/44_3.JPG Team Dynamics Monza Wheels Anthracite Grey Size: 17" x 7" +50 offset 5x100 lug pattern Centercaps and Lugs Included The wheels are in great condition with no curb rash or bends. http://i...

So you guys really don't believe in turbo timers?

sammydafish - PayPal-ed you the money for your crank.

Sorry napstermike I didn't really mean you. I will be sending an email off to you in a second.

sammydafish pm-ed me on the 30th. I wrote him back but havn't heard back from him since.

Ive gotten your emails, responded back that I'm interested but never heard back.

Any reason?

What are you looking to get for it?

Emailed you back. Do you have a way to seperate the block and pull the crank? Shipping an entire shortblock from NJ will be expensive I'm sure.

Thanks
Brad

I am looking for a crank to complete my EJ22t stroker build. I need the following: EJ25 (Phase 1 - DOHC) Crank or Shortblock This crank has a center main thrust instead of the newer (late 99 and up) rear main thrust bearing found on the Phase II EJ25 SOHC. Please email me at bradalger@yahoo.com Than...

Was there ever such a thing as a Phase II 2.2? If you look at a Pauter's site you see that the Big End Bores on the Phase I EJ22 and the Phase I EJ25 are different. Basically you couldn't use Phase I EJ25 Rods with a Phase I EJ22 crank. I have a full EJ22t rotating assembly (Crank/Rods/Pistons-Pins)...

No there is a compressor that compresses that takes ambient air and compresses it then feeds it to the horns. In colder temps the air is already dense. To make the air horns work you need to compress the air enough so that once it reaches the horns its allowed to expand at a certain rate. I guess wh...

This is one of the reasons you hear about guys running 20+ psi on a stock blocked wrx or 22t. If you look at their profiles you'll see that most are in Colorado/Utah/Nevada or something other low air density location. I don't know what the compensation differences are in the winter with the air temp...

Alright I finally have all of the turbo parts in from the Vishnu kit.

As well i was able to get the TWE Stage 3 DOHC heads.

I'll let everyone know how its coming a little later.

If you can get a manifold with it thats all the better. I was just saying a cleaned up or newer set of 2.5 DOHC heads shouldn't run you more then $250. At least I wouldn't pay more then that.

There are people asking $400 + for WRX heads but thats a little more understandable.

brad

I will have an extra set. Possibly 2 extra sets once my build is done.

I wouldn't pay much more then about $250.

Brad

I already PMed this to not8player but figured I'd post it here for general information. I looked all over the place and talked with a half dozen vendors that could get me their custom design EJ25 Phase I Forged rods but they all equaled out to be almost the price or way more then what Pauter Rods we...

Apparently the Ultimate works very well with our subarus. I have talked with a few folks who were using other piggy backs who had a lot of trouble adjusting idle with injectors above 500cc. I know of two that were using the PP SMT6 who switched to Ultimates and it instantly cured the problem. I was ...

Yes. Justice Racing Engines is in Frederick, MD and came highly recomended from Dan at MACH V.

Check out their website:

http://www.justiceracingengines.com/

Shipping is always a possibility. I think I paid $600 to ship 10 hours from Michigan. SC shouldn't be as much:)

Actually we are going on vacation to Myrtle Beach in June. Maybe I could trailor it to you.

4 - EJ22t Rods
4-EJ22t Pistons
EJ22t Crank

Crank/Rods/Pistons are assembled.

I'm selling them because I stripped the block for a stroker build and replaced all of the above.

Don't really know a price but am willing to accept offers. I prefer email to PMs. bradalger@yahoo.com

Thanks
Brad

PMed

Oh yeah I had a 91 Legacy Turbo 5spd parts car with the 3.90 lsd rear that I didn't end up using. Its now for sale in the Parts Shed.