legacycentral bbs

Sold my wagon years ago, never did swap the blue dash in to match the rest of the interior. Found it in the shed this afternoon..

IF anyone needs a good blue dash let me know... Cheap, but not totally free..

did you ever figure this out as my wife's 90 is doing this now.

Wife's 90 Lego Wagon, swapped in a used trans last October (180K miles) due to the transfer case failing. The new to it trans worked okay, little laggy on the 1-2 shift, but okay other than that. Now when you stop at a light or in traffic, the trans effectively goes to neutral. It is still engaged, ...

96 and 99 interchange??

mike-tracy wrote:Pick N Pull Tacoma has 3 96 Legacys that hit the yard in the last couple days. Might have some luck there.

Thanks, will let them know!

Have a friend who needs an inexpensive grill for their '96 Legacy wagon. If anyone has a decent one let me know please

Thanks

I put a Forester back half on my Legacy wagon... pretty much a bolt on, except now the tip is about 2" under the bumper. Not in fornt of it, just tucked back farther than the stock tips.

god what a color combo... if it was white I'd grab it for the front sheetmetal, then part the rest.... but pale flat blue on a white wagon ... eewwhh!

We have a '94 Turbo sedan at the wrecking yard I work at, but hte boss wants me to get it running right before he decides what to do with it...

we have one at the wrecking yard I work at, but it has 2 injectors that aren't getting a driver signal... Boss want to get it running right before he dicides what to do with it...

I'll take a look at the lights adn at the interchange just in case....

Another easy way to alter the milage is to just swap the lower mile speedo cluster from another car... My white wagon currently has 215K on it, but i have a cluster with only 147K... I'd never swap one for resale though. I keep the incase one of the clusters craps out... My wife's Wagon show 084K mi...

most silicone based sealants are mildly corrosive... I resealed mine using windshield caulking, and it hasn't leaked in over 5 years! I may never get it apart again, but...

BTW, the stuff for showers and sinks CAN melt back out if not cured prperly, or if it has constant contact with water....

wow... so the check valve is in the middle of the vacumn line someplace instead of being at the booster like an american car?

Also look at the 16" Chevy/GM 5x100 FWD wheels. I'm running 16" Cavalier GT wheels, and the fit is awesome. I've got pics here someplace of some 5 spoke 15" Cavalier wheels on my daughters Bermuda Blue wagon also. I'll add a link if I can find the pic's. Not sure what the width of the...

We have a '95 wagon in the wrecking yard that SHOULD still have the tail lights, if they will interchange... Probably $50 +_ shipping for the pair, can check status, condition and interchange tomorrow at work.

I've got 3 wheel speed sensors, not sure which one isn't there.... can check it out and if I have a Rt Rear I'll pm ya if you want

I have a second, push button, switch installed under hood on my wife's '90, as the ignition switch sometimes does a "clicks, but no crank". I went from the battery, thru the switch to the start terminal on the solenoid. She just leaves the key in run, pops the hood and pushes the button. I...

someone just brought this thred back to may attention... never did remember to check the hitch then... It's got the smaller 1" square reciever, not sure of the weight rating. I DO have all the mount hardware for it also. Still for sale since I got rid of my '91 wagon project and the '90 wagon h...

cool thanks!!

BTW, after checking the rest of the electrical systems (except the heater controls) Everything seems to work EXCEPT the power windows, sunroof, and the turn signals.... Common power source for those??

Initially swapped injectors, no change, #4 still dead, then swapped connector, and #2 died, so not injector. Also tested it with a solenoid light, and there is no injector pulse signal. If anyone has the '93 turbo wiring schematics bookmarked please send em a link.Boss wants this thing running right...

so far I've swapped injectors around, replaced plugs, ohm'd plug wires, and swapped #2 & #4 injector connectors. Also used the 'noid light to test the driver side injector connectors and one is firing, the other isn't... I don't know if it's thowing any codes as the dash is inop. Someone hacked ...

Not sure of the probelm now, but to answer your Delta cam question about hte lobes being smallr: Delta regrinds factory cams, so they have to reduce the base circle to get the increased lift and duration. Delta DOES NOT start with cam blanks like Comp or Lunati, etc... That's why your new cams are s...

I changed the one on my daughters car took about 5 minutes t get it out (I dropped it and had to chase it), and about 3 minutes to put back in... same as above, swivel socket, and one extension....