legacycentral bbs

yep, got it done.
another Q, if your will the engine not start if the CEL reads code 22?
thats were im at now.

upon completion of the GT conversion,i have started this week on my 89 RS. droping in a new enginge,i decided to change the cam belt myself. i know how to line everything up but im stuck on the tensioner.i had a feeling that i had to put a pin through to hold in place but ignored my intuition.so whe...

pull your gauge cluster out and hool all 4 lines behind there. directly behind the factory tachometer, there is your posi and negi. which also have the symbols next to them so cant go wrong. your orange wire from your A/m tacho is illumination so from one of the bulbs follow a line that should lead ...

morning,
ok, im going to make a start on it now.....relay and fuse......



cheers peop's

hey peop's, we have just finished re-assembling a manual conversion on a 92 GT facelift legacy. i have check all wires going into the fuel pump and its not getting a live feed. we're not even getting the prime when ignition is on ACC. the pump itself is fine. Also(if this is any help) we're not gett...

josh

i followed your examples but have run into a problem.
the starter motor wont dis-engage after car has started.
do you have any ideas?

yes the wagon was originally auto and turbo.
i havent done any wiring.
have changed both ecu.

josh would be great if you could direct me to your "write up"


will go out and try wire it up now,oh to what do i need to connect it to?

thanks fellas.

hi guys, i just completed re-assembling my 90 gt wagon(engine and gearbox donated by 90 RS type R) and now its not starting. ive narrowed it down to an electrical problem.i turned the starter over with power straight from the battery so now realise the wire to the starter is dead. the only connectio...

hey fellas, i have nt done too much work on the car(weather you know) but i did manage to put replacement engine in. my Q is, after bolting TC back on and bolting on trans,it seems that the TC is almost unmoveable (turning that is). could it be that i have not put the TC back on properly and its jam...

thanks heaps for that, i am going to take the tc bolts off as i have located that space to do it. i was lucky enough to have purchased a cheap wrek with mint engine ( now in the RS ) and trans ( 135k on the dial ) so am gona use this but, i dont remember how i seperated that trans which is sitting o...

hey,
ive tried but seems to close back up when i get any sort of gap.
someone has told me that i may need to unbolt torq converter but how am i suposse to get in there and loosen nuts?

thanks.

hi guys,
just a quick Q, i am in the process of removing transmission from 91 gt wagon but am stuck on splitting the engine and box.

can anyone help me?