legacycentral bbs

I am watching and praying this works out I would love to be able to run yellow tops, jecs maf and a vf39 on the stock ecu

I got a blitz muffler off jdm bg5 legacy and it bolted on perfect

http://www.youtube.com/watch?v=JZJNvQueppc

edit... doh wrong vid

I work at a truck exhaust shop. We have hundreds of jigs and samples from the big trucks. Someone will bring a pipe to us and if we don't have a jig for it we weld up a jig to one of the benches and make a new one from the jig welded to the bench. In the case of my parts my wagon is at home with no ...

working on the install.

Got my wheels powder coated, local Subaru club setup a group buy so I got mine done. These will be my future winter rims. Ericem got his rims done too.

Sounds sweet, now I need to put the 3" down pipe on and the new mid pipe

http://www.youtube.com/watch?v=2AgrwS_- ... re=channel

http://www.youtube.com/watch?v=odvV4LnD ... re=channel

I got my Blitz Nur muffler. BG5 muffler bolts right on to the stock mid pipe

douglas vincent wrote:Poo don't run.....

I'm sure if you ate some mcdonalds it will

I wouldn't bother replacing the stock downpipe for another factory downpipe off a STI. They are both crappy flow wise just being a flat plate with a small hole in it. You want a nice bellmouth our divorced downpipe.

Ended up ditching the Magnaflow in favor of a used Blitz Nur Spec off a jdm BG turbo wagon so I am hoping the hangers will work better. http://www.jhotexports.com/ebay/tx/35183/35183_0.jpg http://www.jhotexports.com/ebay/tx/35183/35183_11.jpg http://img72.imageshack.us/img72/5089/legacy003pb1.jpg

You can have the factory deck from my car, its got the line in. Just pay shipping, though the back light is burnt out on the CD player part.

Yeah the lateral links, not the trailing arms. Looking at some used stock sti lateral arms.

Does anyone know if the rear arms off a 04 sti would fit on my 92 tw? I tried searching but couldn't find out. Most of the bushings on my car are fried and I want to get rid of the rod style endlinks on my rear sway bar as well.

Thanks for the offer but I don't need tips, I ended up making some Here's what I am working on doing, might have it finished tomorrow. Then I can move onto making hangers out of 1/2" stainless solid rod

Thats just roof proofing oil hehe, to cold out to be painting...

I am thinking 2 of these tips on there ....

Ok I am working on my muffler and want some suggestions.... heres what I got, I need to decide on a tip size and style. http://i142.photobucket.com/albums/r83/HpiJosh222/DSCF0158.jpg Now I know I need to move the tips close together and thats not an issue I can just make up a small offset section. I...

I forget which one is which but one is pull type clutch and the other is push type, so you can't use a turbo clutch on a n/a tranny

The 3" ID (inner Dia) ends of the cat are long enough so that you can overlap the joint slightly when you put the 3" OD(outer dia) ends of the downpipe into the ID Cat so it won't break. I have never dealt with car exhaust shops but I assume they can do most of what Truck(big rig) exhaust ...

Hopefully my placement of the O2 bungs will work out. One on top is for the stock narrow band and the one off to the side with the plug is for a wideband O2 sensor when I get one of those.

should have went bronze

It is a Magnaflow #59959 its 8" long with 3" in/out, the cat part is 4" dia.

Almost time for the turbo back to go on :D http://i142.photobucket.com/albums/r83/HpiJosh222/6-1.jpg http://i142.photobucket.com/albums/r83/HpiJosh222/4-4.jpg http://i142.photobucket.com/albums/r83/HpiJosh222/2-13.jpg All done :) http://i142.photobucket.com/albums/r83/HpiJosh222/Picture073-2.jpg

Got those 4 for $50 cash

From my old boss who used to be into subarus