Search found 27067 matches

by Legacy777
Thu Nov 04, 2021 12:13 am
Forum: Engine
Topic: engine dies below 3000rpm
Replies: 11
Views: 170

Re: engine dies below 3000rpm

The coolant temp sensor can cause all sorts of weirdness from my experience so I wouldn't rule it out without doing some testing.

Did you use a new Subaru temp sensor or aftermarket? The Subaru one should be around $20 and it's what I'd recommend using.
by Legacy777
Tue Nov 02, 2021 6:33 pm
Forum: Electrical
Topic: Another evoscan question
Replies: 3
Views: 90

Re: Another evoscan question

My suggestion would be to start by reading through this thread

viewtopic.php?f=19&t=37409

You can review this search for Evoscan and see if any info is helpful.
by Legacy777
Tue Nov 02, 2021 6:25 pm
Forum: Engine
Topic: engine dies below 3000rpm
Replies: 11
Views: 170

Re: engine dies below 3000rpm

How old is the coolant temp sensor?

If you unplug the coolant temp sensor and try to drive does the problem still exist?

Same question if you unplug the O2 sensor and try to drive?
by Legacy777
Tue Nov 02, 2021 6:24 pm
Forum: Intake
Topic: Anything new for updating injectors?
Replies: 19
Views: 1109

Re: Anything new for updating injectors?

What is known is the STI sidefeeds physically fit in 90-94 non turbo fuel injector rails. They do NOT fit in ej22t fuel rails. Slight correction, the 92-94 non-turbo fuel rails work with the STi side feed injectors. There were two different injector types for the 90-91 non-turbo Legacies and such t...
by Legacy777
Sat Oct 30, 2021 1:03 am
Forum: Electrical
Topic: Another evoscan question
Replies: 3
Views: 90

Re: Another evoscan question

Hi Leo, I haven't used the software so I'm not sure. Does the website give any troubleshooting tips? Are you using a USB cable to connect to your computer? If you don't get an answer here in a couple days you may want to try some of the first gen Legacy facebook groups as they are much more active.
by Legacy777
Sat Oct 30, 2021 1:01 am
Forum: Engine
Topic: engine dies below 3000rpm
Replies: 11
Views: 170

Re: engine dies below 3000rpm

Let us know how it goes. I had similar stalling issues while driving and it was the MAF.
by Legacy777
Sat Oct 30, 2021 1:00 am
Forum: Wheels, Tires and Brakes
Topic: 1992 Legacy BC Turbo - brake improvement
Replies: 3
Views: 123

Re: 1992 Legacy BC Turbo - brake improvement

Ok, let us know if you find anything when you cut through them.
by Legacy777
Sat Oct 30, 2021 12:56 am
Forum: Intake
Topic: Anything new for updating injectors?
Replies: 19
Views: 1109

Re: Anything new for updating injectors?

Those cars are long gone around here. Can I not use a '95-99 manifold so long as I also use the fuel rails with it? Most likely no because the intake ports on the heads are going to be different. You have to match the intake manifold to the phase of heads. Maybe someone else can confirm they work o...
by Legacy777
Fri Oct 22, 2021 7:15 pm
Forum: Intake
Topic: Anything new for updating injectors?
Replies: 19
Views: 1109

Re: Anything new for updating injectors?

In the 93 MY there is a different part number used from Sept of 92 production dates forward. However, I think the manifold should be compatible/interchangeable for all 90-94 non-turbo engines. The turbo manifold is obviously different.
by Legacy777
Mon Oct 18, 2021 5:36 pm
Forum: Wheels, Tires and Brakes
Topic: 1992 Legacy BC Turbo - brake improvement
Replies: 3
Views: 123

Re: 1992 Legacy BC Turbo - brake improvement

Thanks for sharing!

So just changing out the bleeders improved brake feel? Were the old ones leaking you think?
by Legacy777
Wed Oct 13, 2021 6:20 pm
Forum: Engine
Topic: Fuel pump 1993 Legacy HELP
Replies: 14
Views: 1525

Re: Fuel pump 1993 Legacy HELP

Glad to hear you got it running!
by Legacy777
Mon Oct 11, 2021 6:46 pm
Forum: Parts Shed
Topic: Robtune wanted
Replies: 1
Views: 161

Re: Robtune wanted

Welcome to the BBS.

I think yeah you'll need to find these from someone that bought one before.

I'm going to move your thread to the parts shed.
by Legacy777
Mon Oct 11, 2021 6:42 pm
Forum: Engine
Topic: EJ22 NA heads on an EJ25 block...
Replies: 17
Views: 2736

Re: EJ22 NA heads on an EJ25 block...

Nice!
by Legacy777
Tue Sep 21, 2021 6:27 pm
Forum: Engine
Topic: Fuel pump 1993 Legacy HELP
Replies: 14
Views: 1525

Re: Fuel pump 1993 Legacy HELP

Yes

If they're not all on one side, check the other side of the steering column as well.

Image
by Legacy777
Mon Sep 20, 2021 7:45 pm
Forum: Engine
Topic: Fuel pump 1993 Legacy HELP
Replies: 14
Views: 1525

Re: Fuel pump 1993 Legacy HELP

Before you order a new pump you may want to connect the green diagnostic connectors which will cycle the relays and cause the fuel pump to cycle on and off.

As for the size, I'm not sure which one is the correct one to fit the stock sender unit.
by Legacy777
Mon Sep 20, 2021 6:52 pm
Forum: Intake
Topic: Anything new for updating injectors?
Replies: 19
Views: 1109

Re: Anything new for updating injectors?

I have a modified 95 JDM WRX ECU with ESL software for tuning. Are the side feeds a drop in or do I need the fuel rails also. What about a FPR? Assuming you're using an ej22t motor. You need to use the rails from a 92-94 non-turbo ej22. Those will allow the use of the STi and compatible side feed i...
by Legacy777
Mon Sep 20, 2021 6:49 pm
Forum: Intake
Topic: 20g vs 25d intake manifold
Replies: 5
Views: 800

Re: 20g vs 25d intake manifold

Hey, Legacy777 I know this is an older post, but I have a spare unmodified v1/v2 EJ20G intake and a 25D intake. I’ll see if I can get some flow numbers comparing the two. The other 20G intake I have is ported, but it’s on the car currently. If I take that one off at some point I’ll flow test it. Th...
by Legacy777
Thu Sep 09, 2021 1:23 pm
Forum: Engine
Topic: 1997 Impreza Coolant Overflow Issue
Replies: 10
Views: 1894

Re: 1997 Impreza Coolant Overflow Issue

Yeah, mine was similar. I couldn’t really figure out what the issue was. I assume it’s probably head gasket related but was unable to definitively prove it.

If you’re able to figure out the cause and any additional details please update this post.

Thanks
by Legacy777
Wed Sep 08, 2021 3:10 pm
Forum: Engine
Topic: 1997 Impreza Coolant Overflow Issue
Replies: 10
Views: 1894

Re: 1997 Impreza Coolant Overflow Issue

Did you ever find a fix for this problem. I have the same issue on my 94. Never overheats but pushes coolant. Unfortunately I never did. I checked for hydrocarbons in the coolant and didn't find any. I sold the car to a friend and he drove it and didn't have issues. So either the coolant level drop...
by Legacy777
Tue Sep 07, 2021 6:10 pm
Forum: Site and Forum Suggestions and Comments
Topic: Why do I keep having to login?
Replies: 3
Views: 932

Re: Why do I keep having to login?

What browser are you currently using? If you using the default browser (windows IE or Edge) (mac Safari), you can install a different web browser and use that to check how the BBS comes up and if you have the same issue where it logs you out. I would suggest Google Chrome or Mozilla Firefox https://...
by Legacy777
Thu Sep 02, 2021 6:19 pm
Forum: Site and Forum Suggestions and Comments
Topic: Why do I keep having to login?
Replies: 3
Views: 932

Re: Why do I keep having to login?

It's probably a cookie thing.

There is a link at the bottom right of the site where you can delete cookies. Try that first. If you still have issues delete the history and cookies in your browser.

If you use a different browser and come back with that same browser does the issue still occur?
by Legacy777
Thu Sep 02, 2021 6:17 pm
Forum: Intake
Topic: Anything new for updating injectors?
Replies: 19
Views: 1109

Re: Anything new for updating injectors?

What are you planning to do for engine management? I have found for my setup with the TD05-16G turbo, 550 injectors, and 220 Delta cam I could probably use a little more fuel. Maybe 600's would be the sweet spot and I could get a little more out of the turbo. The 550 side feeds from the STi and othe...
by Legacy777
Mon Aug 02, 2021 6:43 pm
Forum: Electrical
Topic: RevScan Connection issues
Replies: 4
Views: 1091

Re: RevScan Connection issues

Revscan is a defunct tuning software. I've tried to mirror what I can from their site. I have the page with the software if you want to play around with it.

https://main.experiencetherave.com/revt ... evscan.htm
by Legacy777
Mon Aug 02, 2021 6:09 pm
Forum: Picture and Multimedia Gallery
Topic: New to the forum, but not to Legacy
Replies: 13
Views: 2389

Re: New to the forum, but not to Legacy

Definitely glad to see some of these older cars still around, being driven, and looking good!
by Legacy777
Mon Aug 02, 2021 6:06 pm
Forum: Electrical
Topic: RevScan Connection issues
Replies: 4
Views: 1091

Re: RevScan Connection issues

Glad it was a simple fix :)