Search found 115 matches

by klin7757
Sat Feb 22, 2020 2:11 am
Forum: Engine
Topic: EJ22T Pistons
Replies: 31
Views: 14077

Re: EJ22T Pistons

Old thread, but I'm still a bit stuck on the compression ratio of these pistons. If the pistons have a dish of -13.3 and sit 3mm below deck, then wouldn't there be a -22.12cc added to that -13.3 dish? I get 7.48:1 with stock heads/gaskets and 7.86:1 with the thinnest Cometic .027" gasket.
by klin7757
Thu Sep 13, 2012 7:17 pm
Forum: Engine
Topic: N/A frankenmotor question
Replies: 2
Views: 895

Re: N/A frankenmotor question

I've been looking into this for my girlfriends Outback. From the numbers I have the phase II (2000+) pistons have a dish of 14.5cc while the phase I is 14cc. With a phase I head gasket (1.52mm) your compression ratio would be 10.26:1 and with a phase II gasket (.58mm) it would be 11.41:1.
by klin7757
Tue Mar 20, 2012 12:25 am
Forum: Parts Shed
Topic: F.S. Random odds and ends...
Replies: 6
Views: 1062

Re: F.S. Random odds and ends...

There's good info in this thread http://bbs.legacycentral.org/viewtopic.php?f=5&t=45711&hilit=catch+can. Basically what I did was, with multiple t-fittings, tied the four vents on the heads and one vent at the rear crank into one, ran it to the can and ran the output of the can back to the i...
by klin7757
Fri Mar 09, 2012 7:12 am
Forum: Parts Shed
Topic: F.S. Random odds and ends...
Replies: 6
Views: 1062

Re: F.S. Random odds and ends...

o.b.o. bump
by klin7757
Tue Mar 06, 2012 7:38 am
Forum: Parts Shed
Topic: wtb hitachi maf
Replies: 5
Views: 774

Re: wtb hitachi maf

Pm'd
by klin7757
Sat Mar 03, 2012 11:50 pm
Forum: Parts Shed
Topic: F.S. Random odds and ends...
Replies: 6
Views: 1062

F.S. Random odds and ends...

Hi all. I have some random stuff lying around that I don't need anymore. Diamond coil pack and ignitor. $40 SOLD Stock coil pack and ignitor $30 Boost control solenoid $25 Pressure exchange solenoid $20 Bypass valve $20 22t MAF $35 22t fuel rails $20 ej25d red top injectors 270cc (can be modded to 5...
by klin7757
Sat Mar 03, 2012 9:47 pm
Forum: Engine
Topic: STI fuel pump assembly?
Replies: 4
Views: 1028

Re: STI fuel pump assembly?

I was thinking that after I put everything back together. The ziptie was nylon though, so I think it should hold up alright. I may get obsessive and dive back in, but we'll see.
by klin7757
Fri Mar 02, 2012 11:52 pm
Forum: Engine
Topic: STI fuel pump assembly?
Replies: 4
Views: 1028

Re: STI fuel pump assembly?

Yeah I swaped over the pump and the newer sender. Repinned possitive and negative leads for the old sender plug, left the old temp sensor in place and zip tied the pump. The rubber grommet that holds the 22t pump in place is too big for the tiny STI pump. Thanks for the response.
by klin7757
Fri Mar 02, 2012 1:36 am
Forum: Engine
Topic: STI fuel pump assembly?
Replies: 4
Views: 1028

STI fuel pump assembly?

I recently got a full STI fuel pump assembly and pump for free from a member of a local board. This unit has an in tank fuel filter. I'm wondering if I can just swap the whole thing? It seems that it's all pretty much the same besides the filter and that the fuel temp sensor sits at a different loca...
by klin7757
Fri Nov 04, 2011 9:13 pm
Forum: Parts Shed
Topic: F.S. wrx 6 disc and under-seat sub
Replies: 7
Views: 1510

Re: F.S. wrx 6 disc and under-seat sub

6 month BUMP. Still have the head unit. 30.00+shipping. Will also include plate that fills the gap left by this unit. Looks totally stock.
by klin7757
Sun May 29, 2011 6:11 pm
Forum: Parts Shed
Topic: F.S. wrx 6 disc and under-seat sub
Replies: 7
Views: 1510

Re: F.S. wrx 6 disc and under-seat sub

It's not going to blow the doors off by any means, but I will give the thing credit. For as small as it is it made a difference. It adds depth to your music that the stock speakers just can't produce. If you're looking for big bass go aftermarket, but if you're looking for an easy way to improve the...
by klin7757
Sun May 29, 2011 3:21 am
Forum: Parts Shed
Topic: F.S. wrx 6 disc and under-seat sub
Replies: 7
Views: 1510

Re: F.S. wrx 6 disc and under-seat sub

It does have an internal 80watt amp. It's all pretty permanent. I had a spare one of these that I messed with and found that you're better off leaving it be. You could take the amp and buy a six inch sub, make your own box and put it under the seat. I thought about it, but that's alot of trouble for...
by klin7757
Sat May 28, 2011 9:44 pm
Forum: Parts Shed
Topic: F.S. wrx 6 disc and under-seat sub
Replies: 7
Views: 1510

Re: F.S. wrx 6 disc and under-seat sub

I believe it's out of an '02 or '03.
by klin7757
Thu May 26, 2011 10:27 pm
Forum: Parts Shed
Topic: F.S. wrx 6 disc and under-seat sub
Replies: 7
Views: 1510

F.S. wrx 6 disc and under-seat sub

I recently upgraded my sound system and have some left over's I would like to sell. First is a wrx 6 disc CD changer. Included is the wiring harness to make this plug and play for our cars. It does have a crack on button #6, but works just fine. $40.00 + shipping http://i273.photobucket.com/albums/j...
by klin7757
Sat Sep 18, 2010 12:25 am
Forum: Parts Shed
Topic: FS: Patch harness, ej20g ecu
Replies: 4
Views: 712

FS: Patch harness, ej20g ecu

Hey guys. I've got a couple things I wouldn't mind parting with. First is an ecu patch harness: http://i273.photobucket.com/albums/jj237/mcklingler/Patchharness.jpg I made this out of a spare ecu and j/y connectors. I added wires, so every pin is accounted for. The soldered end is epoxy'd and very s...
by klin7757
Sun Sep 12, 2010 11:33 pm
Forum: Electrical
Topic: EJ20G "RobTune" Info
Replies: 585
Views: 106396

Re: EJ20G "RobTune" Info

Also, from your pictures I see you have an early Liberty EJ20G ECU. Unfortunately these not tunable. You will need another G ECU for chipping. -Rob Could you explain why these are not tunable? I accidentally bought a 20g ecu not realizing it was from a Liberty. It has the chip slot just like the wr...
by klin7757
Fri Sep 10, 2010 12:38 am
Forum: Misc
Topic: Someone stole my baby!
Replies: 16
Views: 2072

Re: Someone stole my baby!

I GOT HER BACK!!! :-D :-D The cops called me this morning and they found her in Commerce City of all places :roll: Some tweekers had basically been living out of my car for the last week. They were pulled over while driving to a court date. The car had no plates on it so of course they didn't make i...
by klin7757
Thu Sep 02, 2010 8:50 pm
Forum: Build Journals
Topic: kimokalihi's 91 SS EJ20 Swap
Replies: 2342
Views: 385009

Re: kimokalihi's 91 SS EJ20 Swap

[quote="kimokalihi"]I have a condition that causes me to feel incredibly restless and anxious and even depressed when I go a whole day and get nothing accomplished. If I waste away an entire day I begin to feel trapped in a rut like my life is going nowhere and I'm worthless. I feel claust...
by klin7757
Wed Sep 01, 2010 10:59 pm
Forum: Misc
Topic: Someone stole my baby!
Replies: 16
Views: 2072

Re: Someone stole my baby!

Thanks for the support guys! Not back yet but fingers crossed. Hopefully she'll be in one piece. I'll keep ya posted.
by klin7757
Tue Aug 31, 2010 7:30 pm
Forum: Misc
Topic: Someone stole my baby!
Replies: 16
Views: 2072

Someone stole my baby!

My touring wagon was stolen from in front of my house this morning. This sucks. I want my baby back! If any Coloradans around here see anything please let me know. I in the DU neighborhood near Wash Park. Oh it now has Legacy GT snowflake rims Pic: http://i273.photobucket.com/albums/jj237/mcklingler...
by klin7757
Wed Aug 04, 2010 9:19 pm
Forum: Ashtray
Topic: So I opened my own shop...
Replies: 15
Views: 2039

Re: So I opened my own shop...

That is too cool man! I've been holding off on my exhaust because I need a custom mid-pipe made, perhaps It's about time and I could come pay a visit...
by klin7757
Fri May 14, 2010 6:22 am
Forum: Electrical
Topic: Adapting an EJ20G ECU
Replies: 66
Views: 23662

Re: Adapting an EJ20G ECU

Agreed. I've made a conversion harness out of a junk connector and ecu. Not bad, just takes time. Oh and be sure to epoxy the soldered end for durability.
by klin7757
Wed May 05, 2010 3:19 am
Forum: Electrical
Topic: EJ20G "RobTune" Info
Replies: 585
Views: 106396

Re: EJ20G "RobTune" Info

dscoobydoo wrote:Trying to figure out if the codes on the outside mean anything.
like the 1C or the Z4
Anyone>>>>?????
Here's a thread by Rob explaining the different codes. http://www.rs25.com/forums/f128/t76359- ... codes.html