legacycentral bbs

would the car still run properly if i put the td04 in and did nothing to the cpu, would there be any side effects at all?
thanks

now if you were to cut it and then weld a straight piece of pipe to it then you could probably use the stock y pipe for wrx ic install, maybe, i might try this

is it possible to be the td04 in without modding your cpu?

thanks

would it be possible when installing an i/c w/ vf11 to just cut the turbo outlet on an angle so that the hose points down at a 90, i dont know just a thought

how about somebody just call me an idiot... i picked up a new starter and my mechanic lent me one of his for a subie, my plan was to try his used one and if it worked i would install the new one so that if the starter was not the problem then i could still take the new one back. after installing the...

thanks, i just got some bigger welding cable, i'm going to try it as soon as i get off work

what do you mean by deadspot?

do u mean in the starter or the engine

thanks, before i install the spare starter i have i am going to run a 2 ga wire from the original battery ground by the starter to the fire wall, and hopefully that works. the car should be well grounded because i used proper power sanding tools, thick wire and good connectors however my engine to b...

i shut my car off and ran into the store, came back and tried to start it and all i get is one click, still have power to everything else, i tried connecting the pull off connector and jumping it to the starter power wire but nothing note: i relocated the battery to the trunk a week ago and i ground...

thanks, but that whole piece on the rad is thin and i can see hairline cracks in it, i ordered a new rad from lordco for 195 bucks and i will be installing it tomrrow, i'm wondering if i should do the upper and lower rad hoses as well

i cracked that nipple on my rad and fill tank

to say that the pressure would not cause that crack in your tank is stupid, especially for someone in fifth gear

your heads are probably warped

i was going to do my coolant tank move the other day and cracked the nipple off where the cap is...but before this i was going to remove the small hose on the rad on the top pass. side, i noticed that the hose was split by the clamp so i took it off and pulled the hose further up the metal line so t...

i'd like to know as well because the stupid nipple on my passenger side of the rad cracked off today, whose dumb idea was it to have a plastic coolant tank and plastic nipples on a rad???

do you still havee the coolant tank

need the coolant tank

do you have the coolant tank

do you have the coolant tank, i broke mine today or does anybody know where i can get 1 fast and cheap?

i had the same situation and the po did the same thing, sometimes the sunroof works right away but most of the time i have to hold the button down or press it a bunch of times to get it to work.

i think that i fixed the problem, i finally got around to pulling my turbo inlet and outlet 90's off and check things out, what i noticed that on the lip of the turbo air inlet there is a slot cut out of the rubber 90, and i could see a little oil running down the outside of the turbo, i checked the...

i'm thinking i should replace all my vacuum hoses but it is hard to find the right sizes up here, i can get close but cant find in mm

these are some pre exhaust pics and pre ac, c/c, w/w 1993 ss, 100,000 km titanium cat back k&n de snork coffee cup a/c delete c/c delete... was not working and dont use anyways windshield washer relocate mods waiting to be installed hallman mbc tdo4 and intercooler perfect power piggy http://www...

THANKS, i was thinking that it was my bpv, i guess cleaning out some of the carbon allowed for some more flow, i couldnt think of what else it could be. it only has just over 100,000 k on it. i was thinking maybe i cracked a pipe on it but it idles fine

so i was once again messing with things under the hood trying to figure out how everything works, i was looking for the iac and was planning on cleaning the hoses out. at the same time i was trying to reset the cpu. anyways i pulled a few hoses off and cleaned them out a bit and now when i let off t...

how much for front calipers rotors and pads

i have 16 wrx wheels