legacycentral bbs

i read the sticky about brakes

so i can just bolt up a set of wrx brakes???

do the bracket holes line up?

what about the abs sensor?

ofcourse i'll need the rotors and any comments to how good they actually are compared to ss brakes

what is the easiest and most popular set to put on?

if you take it to a shop, they can check your bearing with one of those stethiscope thingys in 2 minutes, so you could probably just givbe em 10 bucks to do it

dlc, i'll email to u after work, do you want pics of the damaged ones too???

guys, sorry about not getting back to you

i do not know how to put the pics on the page,
they only have 95.000 km on them and are in pretty good shape

also, i am in coquitlam every day 604 970 8994 lve a message
thanks and sorry again

thanks for all your comments i figured it out, it is a bad piston in the calipre, that's mainly what i was thinking but i took it to my mechanic to make sure... i should have figured it out myself ways we tested and hints to what it was.... far more brake dust on right front rim, calipre was conside...

what is the best way to check the ball joints??


ericem...does it come and go when your driving straight???

i know of cvs doing that but off and on and while driving straight???

my car is a 1993 ss ej22t w/ 100,000 km 4eat SOMETIMES, only sometimes while driving the car it will all of a sudden start knocking, it feels like something in the steering and i can kinda feel it in the floor, the steering wheel will act as if i were braking on warped rotors, it seems to be consist...

MINE TO, BUT RARELY, I DISCONNECT THE BATTERY and then put it back on and it goes away

types of stainless you could use... ss 310, this type is used as well on jet engines, max cont. heat is 2050 intermittent is 1950, this is more of a popular ss but you could also use 442 or 446 which is harder to find 304 and 316 are good to around 1450 to 1550 and thats really pushing it, it melts ...

i was messing around in a parking lot in the snow on christmas day and after doing perfect on a dime donuts i let off the gas and shot sideways into the curb, my car drove strait 5 k back to my house, when i got out and had a better look i noticed the right rear tire was pushed in at the bottom and ...

I,ve checked which ones we shouldn't use....

304L or 304 and 316l or 316...L stands for low carbon
316 ss is good for about 1400F

i'll keep that in mindand let you know what kind of stainless i use in the futere, thanks

sorry, i should have stated "custom"

i was thinking around a 800 -900

mine is a custom made titanium exhaust hand made by a guy at my work, i made a 9.5 extension and it fits fine

i did from just after the downpipe back, the downpipe will be done when i figure out which type of stainless i can use, does anybody know excactly how hot the dp gets??

ON friday i made a 9.5" extension to go in between my mid pipe and my exhaust pipe, and that's it. my custom titanium wrx exhaust fits almost perfect, i had to bend the lip of my rear end housing with a crescent wrench and i need a bit more length from the hangers on the back and i'm good. i al...

1993 rims with tires, painted black, 80% tread 15by 6 i beleive 3 good tires, 2 good rims 2 damaged. toyo spectrum tires

150$ vancouver canada area

it's a rust bucket

you need to make a 9.5" piece of pipe with flanges to go between the mid pipe and muffler pipe, the hangers might need slight modification

today i unbolted my stock exhaust from the cat back, the muffler has holes in it and i want to replace, this guy at my work made up a titanium exhaust from cat back for his wrx that he had and took it off before he sold it. so he gave it to me to try and fit on my legacy, definitely not a bolt up ho...

the gauge is by acutec, i got it from my work and we use tyhem for pressure testing, it's probably pretty cheap but i tested to 30 psi w/ no leaks

thanks for your reply

so i tee'd into the #1 runner vaccuum line, seems to work pretty well,

is this normal...?
18-20 vacuum at idle,
approx 8.5-9.5 at full boost
car is pretty much stock...
at full boost the needle shakes eratically around 9.5???

Thanks

The first noise from my ej22t!!! it took me a few days to figure out but my mechanic about minutes. i could here a rattle consistent with engine speed but heavier sounding than a heat shield, heat shield rattle was my second noise, anyways, sometimes the noise would almost go away, sometimes it was ...