Search found 304 matches

by logan9691
Mon Sep 14, 2020 1:33 am
Forum: Parts Shed
Topic: WTB: EDM headlights w/ level motors.
Replies: 1
Views: 1641

WTB: EDM headlights w/ level motors.

Does anyone have any edm headlights with level motors? Maybe the switch as well.

Thanks!
by logan9691
Mon Mar 02, 2020 4:12 am
Forum: Parts Shed
Topic: WTB: Rob Tune ECU (550, 20psi)
Replies: 1
Views: 1059

WTB: Rob Tune ECU (550, 20psi)

I’m in need of an ECU with a Rob Tune board and chip in it for 550 injectors, launch control, 20 psi boost. Mine is bad and the car is dead in the water without it. I’ve tried contact Rob but he went silent on me.

Let me know if you have one available and price.

Thanks!

-Logan
by logan9691
Sat Feb 08, 2020 11:54 pm
Forum: Engine
Topic: Idle issue
Replies: 4
Views: 1758

Re: Idle issue

I’ve checked resistance in the engine harness and everything seems ok. I was leaning towards an ECU issue at this point. Tips for checking resistance in harness back to ECU?
by logan9691
Sat Feb 08, 2020 11:52 pm
Forum: Engine
Topic: Idle issue
Replies: 4
Views: 1758

Re: Idle issue

I went from no high idle when starting the car cold and the car running rich (per wide band) all the time, letting off throttle car will not lean out. Then the engine harness got pulled on and now I have an idle that sits at 2,500 rpms, you touch the throttle and the car wants to “stumble”, the car ...
by logan9691
Mon Feb 03, 2020 2:28 am
Forum: Engine
Topic: Idle issue
Replies: 4
Views: 1758

Idle issue

Hi All, I am having an issue with the idle on my '93 SS. You start the car up and it instantly jumps to 3,000rpm. If you unplug the IACV it will idle down a bit, but still remains high. The only code I am getting is 24, which is the IACV. I have swapped my throttle body with no change, and I changed...
by logan9691
Sat Nov 18, 2017 10:43 pm
Forum: Parts Shed
Topic: *SOLD* FS (WA): 92-94 SS/TW Hood with Scoop - $200 OBO
Replies: 63
Views: 10789

Re: FS (WA): 92-94 SS/TW Hood with Scoop - $200

Willing to sell just the hood scoop?
by logan9691
Tue Jul 12, 2016 3:37 am
Forum: Parts Shed
Topic: Legacy Spec B parts OBO
Replies: 1
Views: 603

Legacy Spec B parts OBO

I have some parts for sale off my 2008 Legacy Spec B. - 565cc top feed blue injectors. $100 and $200 OBO (100,000 and 30,000 miles) - VF46 turbo. Needs a rebuild, has a leaking rear seal on it. $250 OBO - rear sway bar with endlinks $100.00 OBO - front sway bar with endlinks $100.00 OBO - Intercoole...
by logan9691
Tue Jul 12, 2016 3:32 am
Forum: Parts Shed
Topic: Legacy Mishimoto Radiator $200 OBO
Replies: 2
Views: 1075

Legacy Mishimoto Radiator $200 OBO

I have a Mishimoto performance radiator for the 91-94 legacy's for sale. This radiator is brand new and only had coolant in it once. I had to replace it with a new one because the breather bolt broke off. I ran it for a day and didn't have any leaks from the bolt but it will need to be removed and t...
by logan9691
Sat Nov 23, 2013 6:22 am
Forum: Electrical
Topic: EJ20G "RobTune" Info
Replies: 585
Views: 106411

Re: EJ20G "RobTune" Info

Well I today while driving I put the car in neutral and held the rpms at around 5k and it got richer, hitting about 12 on the gauge, rather then 18 during launch control.
by logan9691
Fri Nov 22, 2013 6:23 pm
Forum: Electrical
Topic: EJ20G "RobTune" Info
Replies: 585
Views: 106411

Re: EJ20G "RobTune" Info

hmmm the only way I can think of turning off Launch Control would be to be at a slight role so the car thinks I am moving enough so it won't allow boost to build.

But good idea. I'll give that a shot today.
by logan9691
Thu Nov 21, 2013 10:12 pm
Forum: Electrical
Topic: EJ20G "RobTune" Info
Replies: 585
Views: 106411

Re: EJ20G "RobTune" Info

ok cool.

post the results here so we can all see :)
by logan9691
Thu Nov 21, 2013 9:55 pm
Forum: Electrical
Topic: EJ20G "RobTune" Info
Replies: 585
Views: 106411

Re: EJ20G "RobTune" Info

AWESOME! thank you.

Yeah I know it usually takes a little while for him to respond. It's not a huge deal since the car runs exactly like it's suppose to with normal driving.

Just out of curiosity (if you know) what is your AFR when doing a pull at around 18psi?
by logan9691
Thu Nov 21, 2013 9:41 pm
Forum: Electrical
Topic: EJ20G "RobTune" Info
Replies: 585
Views: 106411

Re: EJ20G "RobTune" Info

i emailed him a little while ago. I don't remember with email to use.

do you by chance have it?
by logan9691
Thu Nov 21, 2013 8:26 pm
Forum: Electrical
Topic: EJ20G "RobTune" Info
Replies: 585
Views: 106411

Re: EJ20G "RobTune" Info

I have an innovate wide band system. I was just sitting in my drive way and brought it up to about 5 lbs and the need was pegged at 18, then went out to a back road and did it again and did a launch, pegged at 18 again, but then drops to 11 when I actually start moving (I think, hard to focus on gau...
by logan9691
Thu Nov 21, 2013 8:20 pm
Forum: Electrical
Topic: EJ20G "RobTune" Info
Replies: 585
Views: 106411

Re: EJ20G "RobTune" Info

So today I was playing with my launch control feature and my AFR pegged at 18 on my gauge....which I don't think it should do and don't remember it doing before....anyone have any ideas?

thanks.

- Logan
by logan9691
Sun Mar 03, 2013 6:13 am
Forum: Picture and Multimedia Gallery
Topic: Tires swapped and salt washed off :)
Replies: 4
Views: 1156

Tires swapped and salt washed off :)

Spent today swapping wheels/tires and washing the salt off from the winter. Here are a few pics: http://i134.photobucket.com/albums/q113/logan9691/F155F19A-8A00-49F7-9511-606D91FD64CE-10827-0000051ADA2CAFB4_zpsf8683d09.jpg http://i134.photobucket.com/albums/q113/logan9691/67402B1C-4F5E-4C8A-9772-F6C...
by logan9691
Mon Jan 28, 2013 7:24 pm
Forum: Electrical
Topic: Adapting an EJ20G ECU
Replies: 66
Views: 23672

Re: Adapting an EJ20G ECU

No, I'm talking about taking the canister out completely. Whether its 2 port NA or 3 port turbo the damn thing takes up equal amount of room. If the purge solenoid isn't being used, what's the point of having it?
by logan9691
Mon Jan 28, 2013 6:37 pm
Forum: Parts Shed
Topic: WTB: ECU coolant temp sensor and IAC valve
Replies: 3
Views: 618

Re: WTB: ECU coolant temp sensor and IAC valve

looking for the whole assembly.
by logan9691
Mon Jan 28, 2013 3:48 am
Forum: Parts Shed
Topic: WTB: ECU coolant temp sensor and IAC valve
Replies: 3
Views: 618

WTB: ECU coolant temp sensor and IAC valve

Hey!

Looking to pick up a working ECU coolant temp sensor (the 2 pin sensor). Also need to get a IAC valve in good shape. If anyone has one or both of these available, let me know and shoot me a PM.

Thanks.

Logan
by logan9691
Mon Jan 28, 2013 3:44 am
Forum: Electrical
Topic: Adapting an EJ20G ECU
Replies: 66
Views: 23672

Re: Adapting an EJ20G ECU

So with the pin47-6 purge control being removed from this ecu, do you think it's possible to remove the charcoal canister to help free up some room under the hood?
by logan9691
Mon Jan 28, 2013 3:39 am
Forum: Electrical
Topic: EJ20G "RobTune" Info
Replies: 585
Views: 106411

Re: EJ20G "RobTune" Info

Has anyone removed the charcoal canister from there Tleg after putting the 20g ecu in? The 20g ecu doesn't use pin47-6, which is the purge control for our cars. If this was removed it would help free up a little space in our cars.

Just a thought.
by logan9691
Mon Nov 19, 2012 8:47 pm
Forum: Parts Shed
Topic: FS: EJ22T Built engine setup
Replies: 3
Views: 855

Re: FS: EJ22T Built engine setup

BUMP!
by logan9691
Fri Nov 16, 2012 5:17 am
Forum: Parts Shed
Topic: FS: Invidia Up-Pipe
Replies: 1
Views: 398

Re: FS: Invidia Up-Pipe

Oh, and I can email pics to anyone who is interested.
by logan9691
Fri Nov 16, 2012 5:12 am
Forum: Parts Shed
Topic: FS: Invidia Up-Pipe
Replies: 1
Views: 398

FS: Invidia Up-Pipe

Hey guys,

I have an Invidia up-pipe for sale, that has never been used. It does not include the turbo mounting studs or nuts/bolts for the manifold side.

Asking $100 + shipping

Shoot me PM's if interested.

Thanks,

Logan
by logan9691
Fri Nov 16, 2012 4:05 am
Forum: Parts Shed
Topic: FS: EJ22T Built engine setup
Replies: 3
Views: 855

FS: EJ22T Built engine setup

Hey guys, I'm going to school and got no money and bills to pay, so I'm putting my 2.2T built engine stuff up for sale. Currently I'm living in Ellensburg, WA and the stuff is at my brothers in Bellingham, WA so pics aren't available right now. I'm fairly set on not shipping this stuff. If anyone is...