legacycentral bbs

I know the 14815 fits but what about the 14816, any thoughts on these two mufflers I did a search and found a few posts with pictures but the links are long gone. Need some advice if these mufflers are the way to go for our cars or not I like magnaflow and I wanted to keep the stock look but want so...

alright thank you I have a subaru dealership in my town so should be no problem just wanted a part number so I could go in and get it hassle free

I swapped out the AWD clutches from my old trans and still got binding I should have swapped the whole tail section but I didn't have a gasket the one on the binding section was still intact so I just swapped the clutches and used the same tail section. I think I want to try using the other one now ...

just figured I would replace it while I was there if it wasn't to expensive.

ok thank you, whenever I have some free time I guess I'll swap out that tail section for the one in my old tranny because it didn't bind should I put a new solenoid c in it or just go for broke with the old stuff. do you have a link to where you can order the solenoid or is it unbelievably expensive...

It shifts great with no slipping, which clutches need replaced? I'm pretty sure something is wrong within that tail section of that tranny. what clutches are in there are they for reverse if so that works fine to. Let me know what you think I really don't want to overhaul that trans it works great b...

Update: I got my speedometer cable to work and then put the fuse in for FWD and bingo it works now so if anyone else has this problem the transmission won't shift if you have the fuse in unless you have a speed signal. the torque bind is still there but at least I can put the fuse in and get away fr...

Yeah it was from a 92 and mine is a 94 I thought that 92-94's were interchangeable? I'll have to check them but I thought they were compatible so I didn't even look, the connectors all connected fine. I still didn't get a chance to hook my speedometer cable and see if that helps any. I have a two ye...

no the light doesn't blink and it does work I have the power mode switch mod and power mode works. I do get a CEL when I feel binding but it could also be a light for no speed reading I just haven't had time to tear the dash apart and check the code. I will today though before work when I'm fixing t...

my torque bind isn't intermittent it's all the time and the weirdest part is I can't even trick it by putting the fuse in. I put the fuse in and the FWD light comes on and it seems like it's not in AWD but then the transmission doesn't shift at all it has me so confused. I thought it was the fuse I ...

do I have to put my differential in from my old transmission to get rid of torque bind what about my old duty solenoid c. AWD worked great on my old transmission no issues let me know what I can do to get this fixed I'm not shy at tearing the tranny out either I've had it out a few times.

yeah it's the same ratio it was from a 92 SS. What can I do to get rid of the torque bind and why when I put a fuse in does it not want to shift at all that's what is puzzling me the most.

Hi I just swapped in a newer 4eat into my 94 SS and it shifts really good but I noticed it seemed like there was some binding going on. when I turn at slow speeds you can really feel it. I think my AWD is engaged all the time when I tried to put the fuse in to turn it off my car didn't shift at all ...

never mind sorry I wasted your time, just give the bone head award. I was working on it last night in the dark and when I looked at again today in the daylight I saw I was putting it in the wrong pin. put it in the right one flicked the switch put it in drive and boom power light so it works now tha...

power light isn't lit up when it worked before it was lit up all the time when the switch was on and it was in gear. I know the power light works because it illuminates on start up. the car is a 94 ss I forgot to mention. Is there a chance that I burnt up that pin of the TCU somehow I thought I migh...

I've read the posts about this and I had it working a year ago but then it just stopped. I just had to put another trans in it and I would like this to work again. I have a switch shorting A4 to ground and this worked before but now doesn't I tried shorting it ride to ground eliminating the switch b...

Hi does anyone have what the specs and tolerances for friction plates and steels are for a turbo legacy automatic I have mine torn apart and want to know if there bad because they really don't look like it. I think my problem might be in the valve body but would like to replace these while I'm in he...

No one has one of these I could buy or let me know which one works so I can look on craigslist

yeah that's what I was expecting thanks for the info.

how much do you think it will cost not counting muffler, cat and that stuff just pipe and custom bending

need a down pipe for my 94 legacy turbo, I want a turbo back system am I right in assuming if I get the down pipe I can get the rest custom made or do I need the mid pipe too. Does the down pipe from the wrx bolt up the same just different mid pipe lengths and flanges right because I've read conflic...

do you think the pump is in fact ruined if so the pump in my old transmission worked can't i just put it in the new one. It took me a little bit to find the trans I got and I had to drive 6 hours to get it and back. I don't have to tell you how rare one is.

I did some research on the internet and I more than likely didn't have the torque converter in far enough and junked my trans fluid pump. What is involved in replaceing or rebuilding that pump has anyone done this before? If there is a past thread please post the link. Thank you

Well I had the trans out and I slid it on then turned it and it popped into place. Another question I'm new to putting a trans in and was wondering when I pulled the torque convertor from the new trans it had a shaft connected to it and my old one the shaft stayed in there which one is wrong. Could ...

Does that sound like what happened if so I still have a good diff from my old trans is that all I would need the old trans. Was just mimissing 3rd and 4th. I made sure it was back all the way do you think it came out while I was putting it in.