Search found 103 matches
- Tue Sep 11, 2012 5:23 am
- Forum: Engine
- Topic: Car no start please help
- Replies: 22
- Views: 2227
Re: Car no start please help
The car is still not starting. I acquired a different manifold wiring harness and I am going to try swapping it out to see if it works. Last time we messed with it there was not a single injector pulsing nor any power at the injectors. We get power all the way up to the connectors on the driverside ...
- Fri Jun 15, 2012 6:32 am
- Forum: Engine
- Topic: Car no start please help
- Replies: 22
- Views: 2227
Re: Car no start please help
They aren't really wet thats why I was thinking that itcould be a grounding issue with the injectors. I am getting spark we did a plug to coil check and pulled the spark plug and grounded it and it had spark. Like i said new cam, crank, and knock. So there is spark no fuel. The middle line off the f...
- Tue Jun 12, 2012 6:52 pm
- Forum: Engine
- Topic: Car no start please help
- Replies: 22
- Views: 2227
Re: Car no start please help
Well thats the thing I feel a faint pulse on the injectors and you can smell a faint oder of gas. I'm thinking it might be a ground to the injectors. The crank gear was lined up on the back mark and the cams are lined up on the front of the cam gear to the notch in the plastic cover.
- Mon Jun 11, 2012 11:43 pm
- Forum: Engine
- Topic: Car no start please help
- Replies: 22
- Views: 2227
Re: Car no start please help
Car still doesn't run. I put in new injectors, spark plugs, tried 4 different coil packs, change out the knock sensor, tried 4 different cranks and 4 different cam sensors. New fuel pump. Cleaned the maf with maf cleaner. New timing belt. I am tearing my hair out my car has all these new parts and i...
- Sun Jun 10, 2012 6:01 pm
- Forum: Engine
- Topic: Car no start please help
- Replies: 22
- Views: 2227
Re: Car no start please help
Yup, so we swapped out all the injectors and the car still wouldnt stay running. We pulled the timing cover and it's off timing
- Sun Jun 10, 2012 12:16 am
- Forum: Engine
- Topic: Car no start please help
- Replies: 22
- Views: 2227
Re: Car no start please help
Knock sensor was cracked and we replaced it and all we are getting for codes is 14 15 16 17 23 and 49.
- Sat Jun 09, 2012 8:35 pm
- Forum: Engine
- Topic: Car no start please help
- Replies: 22
- Views: 2227
Re: Car no start please help
When I disconnect the battery and reconnect it the codes pop back up. Spark plugs are good and I pulled my coil pack and 2 off the bolts where corroded and I cleaned them and put a new diamond coil pack on.
- Sun Jun 03, 2012 5:39 am
- Forum: Engine
- Topic: Car no start please help
- Replies: 22
- Views: 2227
Re: Car no start please help
Car isalmost back together and whenn we where looking over everything and starting up the motor to do a little diag we can hear what seems to be the fuel pressure regulator making a tapping noise. Upon finding this we where trying to feel it to make sure that that was the cause and you can clearly h...
- Sat Jun 02, 2012 1:25 am
- Forum: Engine
- Topic: Car no start please help
- Replies: 22
- Views: 2227
Re: Car no start please help
Also the whole car is taken apart because where painting it so there's no front bumper, headlight, turn signals, or grill
- Sat Jun 02, 2012 1:11 am
- Forum: Engine
- Topic: Car no start please help
- Replies: 22
- Views: 2227
Re: Car no start please help
Even looking threw the forum and bouncing my problems off my buddy and all I keep hearing and seeing in a bad ground could this be a issue caused by a bad ground?
- Sat Jun 02, 2012 12:21 am
- Forum: Engine
- Topic: Car no start please help
- Replies: 22
- Views: 2227
Re: Car no start please help
What ended up happening is there was a blown fuse so it wasn't showing the codes at first. So we replaced the fuse for the ecu and the cam sensor was replaced and cleaned the crank. Got the car running and got no codes, also no boost. The car would cut out once boosted over 6psi. So I got it down to...
- Thu May 31, 2012 7:44 am
- Forum: Community Projects
- Topic: Denver based peeps
- Replies: 78
- Views: 29339
Re: Denver based peeps
Thanks to 91legacyawdturbo and Doaomo telling me about this my legacy got fixed and my wally 255 is in and I'm painting my car this week to be ready for this meet I am really excited and cant wait to meet everyone and see what other mods you guys have come up with
- Sun May 27, 2012 8:41 am
- Forum: Engine
- Topic: Car no start please help
- Replies: 22
- Views: 2227
Car no start please help
Hey guys, Got a 92 turbo legacy with the ej22, car died on the freeway a couple days back. Had it towed home and started messing with it this weekend. New pump dropped in works good, getting spark, found a blown fuse for the ecu replaced it and started checking other stuff and it's still not startin...
- Sun Mar 11, 2012 8:32 pm
- Forum: Turbo
- Topic: External waste gate
- Replies: 13
- Views: 2775
Re: External waste gate
Alrighty, someone I know said that it could be the vacuum lines.
- Sun Mar 11, 2012 2:44 am
- Forum: Turbo
- Topic: External waste gate
- Replies: 13
- Views: 2775
Re: External waste gate
Ok so here we go, install was a breeze. Did a new uppipe with a 38mm waste gate and I did all new exhaust gaskets. Car started up perfect and idle was good. I turned the boost controller down a bit just incase didn't wanna over boost. So I got out to the street and gave it a little burp and it sound...
- Fri Mar 09, 2012 9:58 pm
- Forum: Engine
- Topic: Fuel Cut Defender
- Replies: 6
- Views: 919
Re: Fuel Cut Defender
Chris Paiano has them and I actually just ordered one from him
- Thu Mar 08, 2012 9:15 am
- Forum: Engine
- Topic: Fuel Cut Defender
- Replies: 6
- Views: 919
Re: Fuel Cut Defender
If he can't make me one could you vrg3
- Thu Mar 08, 2012 9:14 am
- Forum: Engine
- Topic: Fuel Cut Defender
- Replies: 6
- Views: 919
Re: Fuel Cut Defender
There wasn't much there so I just emailed him
- Wed Mar 07, 2012 9:15 pm
- Forum: Engine
- Topic: Fuel Cut Defender
- Replies: 6
- Views: 919
Fuel Cut Defender
Hey everybody, I know there is sticky threads on here about the fuel cut defender but I just wanted to know if there is anything out there at is made for our cars that we can buy. I read the stickys but I am still a little confused about how to do it. Right now I am running a td04 with a front mount...
- Tue Mar 06, 2012 7:56 am
- Forum: Turbo
- Topic: External waste gate
- Replies: 13
- Views: 2775
Re: External waste gate
Its on the td04 not the vf11 and when I searched there where some people that had some kinda shoty posts on the ewg. I was just hoping someone would have had this done on the td04 or a vf39 on the ej22t. Sorry if i came of dickish to that response sqc151. Waste gate and td04 bracket came in today an...
- Mon Mar 05, 2012 7:28 pm
- Forum: Turbo
- Topic: External waste gate
- Replies: 13
- Views: 2775
Re: External waste gate
I will let you all know first
- Mon Mar 05, 2012 7:22 am
- Forum: Turbo
- Topic: External waste gate
- Replies: 13
- Views: 2775
Re: External waste gate
Alright, well all my parts are almost here and I am installing them saturday so I will let you all know how it feels and hopefully I'll have some videos for ya'll to check out
- Mon Mar 05, 2012 6:15 am
- Forum: Turbo
- Topic: External waste gate
- Replies: 13
- Views: 2775
Re: External waste gate
and sqc151 I'm not asking what it dopes I want to hear from people on here that have done the set up on our cars not other newer models
- Mon Mar 05, 2012 6:13 am
- Forum: Turbo
- Topic: External waste gate
- Replies: 13
- Views: 2775
Re: External waste gate
Why is it a waste of money? I have installed this set up on two different bug eyes and they where running the td04 and there was a nice little horse power gain.
- Thu Mar 01, 2012 4:11 am
- Forum: Turbo
- Topic: External waste gate
- Replies: 13
- Views: 2775
External waste gate
So just a question, has anyone on here got a external waste gate set up? I installed 2 set ups one on a 02 wagon wrx and another on a 03 sedan wrx. I love the way it sounds and it seems like a really good power gain. I just ordered up everything for my car(uppipe, waste gate, block plate for td04) a...