Search found 106 matches
- Mon Mar 26, 2012 3:26 am
- Forum: Parts Shed
- Topic: CHEAP PARTS, TMIC, OEM water pump, oil pump, samco y pipe
- Replies: 12
- Views: 1477
Re: CHEAP PARTS, TMIC, OEM water pump, oil pump, samco y pip
Samco y-pipe just sold sold on ebay.
- Mon Mar 26, 2012 3:06 am
- Forum: Parts Shed
- Topic: CHEAP PARTS, TMIC, OEM water pump, oil pump, samco y pipe
- Replies: 12
- Views: 1477
Re: CHEAP PARTS, TMIC, OEM water pump, oil pump, samco y pip
i am no where close. im in the gorge, right on the southern boarder. i doubt you want to drive down here, about 3-4 hours. if you want to, you are more than welcome. i am looking to ship when someone sends payment. as far as shaft play, the blades do not touch the housing, not bad. any used td04 is ...
- Sat Mar 24, 2012 10:07 pm
- Forum: Parts Shed
- Topic: CHEAP PARTS, TMIC, OEM water pump, oil pump, samco y pipe
- Replies: 12
- Views: 1477
Re: CHEAP PARTS, TMIC, OEM water pump, oil pump, samco y pip
come on guys, im trying to move this stuff. i have to buy some riding gear. these are the prices i paid for this stuff y pipe, t clamps, elbow, adapter: 140 oem water pump for EJ22T: 120 oem oil pump for EJ22T: 120 used 06 TMIC w/70k: 70 used TD04 w/70k: 100 thats over 500 bucks. package deal for al...
- Fri Mar 23, 2012 8:07 pm
- Forum: Parts Shed
- Topic: CHEAP PARTS, TMIC, OEM water pump, oil pump, samco y pipe
- Replies: 12
- Views: 1477
Re: CHEAP PARTS, TMIC, OEM water pump, oil pump, samco y pip
no, it does not have the sprayer, it is a WRX TMIC, not a STI TMIC.
No, the kit is not setup currently. you have to do a few minor mods, not hard to do, check out BSODS how to sticky in the intercooler section.
pm'ed
No, the kit is not setup currently. you have to do a few minor mods, not hard to do, check out BSODS how to sticky in the intercooler section.
pm'ed
- Thu Mar 22, 2012 6:56 am
- Forum: Parts Shed
- Topic: CHEAP PARTS, TMIC, OEM water pump, oil pump, samco y pipe
- Replies: 12
- Views: 1477
CHEAP PARTS, TMIC, OEM water pump, oil pump, samco y pipe
BRAND NEW 02-05 WRX Samco y pipe kit, RED color, 4 pieces, with stainless t clamps and even a 90* elbow for a td04 swap. 70 bucks shipped. SOLD! 06-07 WRX top mount intercooler, good shape, 50 bucks shipped. 92-94 OEM SUBARU EJ22T water pump, Brand new in box, 60 bucks shipped. 92-94 OEM SUBARU EJ22...
- Thu Mar 08, 2012 3:45 am
- Forum: Parts Shed
- Topic: some parts for sale LOWERED PRICES
- Replies: 6
- Views: 909
Re: some parts for sale LOWERED PRICES
really? no one? throw me some offers guys, i need this stuff gone.
- Thu Mar 01, 2012 4:28 am
- Forum: Parts Shed
- Topic: some parts for sale LOWERED PRICES
- Replies: 6
- Views: 909
Re: some parts for sale, samco y pipe, water pump, oil pump.
anyone? make some offers
- Wed Feb 29, 2012 7:46 am
- Forum: Parts Shed
- Topic: some parts for sale LOWERED PRICES
- Replies: 6
- Views: 909
some parts for sale LOWERED PRICES
hey guys i got some parts to sell, im getting a gc8 so i wont need these parts that were for my leggy. OEM Subaru 92-94 water pump- 60 bucks shipped. BNIB OEM Subaru 92-94 Oil Pump 60 bucks shipped. BNIB 06 TD04 turbo, decent shape, around 76k, a little shaft play, not bad, the wheel doesnt touch th...
- Fri Feb 10, 2012 3:11 am
- Forum: Parts Shed
- Topic: (NASIOC) RS/RA block, Magnesium intake manifold, more!
- Replies: 3
- Views: 1172
Re: (NASIOC) RS/RA block, Magnesium intake manifold, more!
alleged rs/ra heads.... people are disputing that.
Re: VF28
yeah i imagine it will feel fast/be a fun car...
we'll see, its all coming together.... i just wish i had another car to drive while this one was down, it would make everything so much easier haha
we'll see, its all coming together.... i just wish i had another car to drive while this one was down, it would make everything so much easier haha
Re: VF28
Really? That's weak... Is it the heads that are the limiting factor?I figured I could make more than that...
- Tue Feb 07, 2012 7:00 am
- Forum: Parts Shed
- Topic: 22T Wanted
- Replies: 9
- Views: 1150
Re: 22T Wanted
lol no doubtcj91legss wrote:those bastards......
Re: VF28
cool, yeah i hoped id be good at those levels, i was aiming for a td04 but i got ripped on a couple.... last time i buy from someone with no feedback... then i found this vf28 from a guy on nasioc, had a ton of great feedback so i took it. it was crazy cheap, only a little bit for more than what a m...
- Sun Feb 05, 2012 8:39 pm
- Forum: Turbo
- Topic: vf11 90 elbow on td04
- Replies: 9
- Views: 2489
Re: vf11 90 elbow on td04
i just purchased a VF28 that the previous owner had had Surgeline weld a 90* inlet on it. any custom shop that deals with forced induction and fabrication can likely do it for you, and likely has done it. pretty common for people to do it to the compressor outlet as well for rotated setups and what ...
Re: VF28
what does the stock boost controller allow? will it be fine at stock boost levels?
- Sat Feb 04, 2012 2:54 am
- Forum: Turbo
- Topic: Let's Play - WTH Turbo is this?
- Replies: 5
- Views: 2184
Re: Let's Play - WTH Turbo is this?
that sucks.... just curious though, how did it run? did it still build boost and make good power? also, lets see some pics of this turbo Fozzy lol i love those things
- Sat Feb 04, 2012 2:36 am
- Forum: Parts Shed
- Topic: WTB TD04
- Replies: 5
- Views: 1138
Re: WTB TD04
yeah shipping is a bitch... but by the time i drove up there id spend way over 50 bucks in gas... where is lynnwood anyways? near tacoma? im in the gorge right on the southern boarder as you probably figured out
VF28
i have the opportunity to buy a vf28. any guys running one? my question is could i get away with running this turbo with the stock ecu and stock injectors? from my understanding it is bigger than a td04 but smaller than a 16g.... what do you guys think? will it be fine if i run 10-12 psi? my other m...
- Sat Feb 04, 2012 12:13 am
- Forum: Parts Shed
- Topic: WTB TD04
- Replies: 5
- Views: 1138
Re: WTB TD04
bump..... no one? i figured someone might have one laying around... LMK
- Sat Feb 04, 2012 12:12 am
- Forum: Intercooling
- Topic: TMIC y pipe solution idea
- Replies: 10
- Views: 3067
Re: TMIC y pipe solution idea
yeah, ive welded it a little bit. havent you seen people weld 90 degree elbows on compressor housings? its done often. i dont think lining stuff up is all that critical. i just need to find come alum. tubing with a similar ID. i just want to make sure it will clear everything, which it will i believ...
- Fri Feb 03, 2012 4:59 am
- Forum: Parts Shed
- Topic: WTB: Perfect Power 6 (PP6)
- Replies: 11
- Views: 1135
Re: WTB: Perfect Power 6 (PP6)
somewhere in the ballpark of 4-500 i believe
- Fri Feb 03, 2012 4:13 am
- Forum: Intercooling
- Topic: Front Mount vs. Top Mount
- Replies: 9
- Views: 2935
Re: Front Mount vs. Top Mount
yea, i toyed with the idea of a front mount, but until i get a bigger turbo and push way more boost i dont think its worth it. but seeing as how im only gonna run a td04 and around 10-12 psi, i didnt think the boost lag would be worth the cool factor.
- Fri Feb 03, 2012 4:07 am
- Forum: Intercooling
- Topic: TMIC y pipe solution idea
- Replies: 10
- Views: 3067
Re: TMIC y pipe solution idea
yeah thats right, just one of the inlet tubes from the tmic. i think it would work, it would just be a matter of getting a nice bead that was completely air-tight. we'll see, and ill try to get pics up as soon as i get back to school monday
- Fri Feb 03, 2012 3:18 am
- Forum: Intercooling
- Topic: TMIC y pipe solution idea
- Replies: 10
- Views: 3067
Re: TMIC y pipe solution idea
well im a machining student and next to our shop is the welding department. im sure i can find someone in there that can tig weld the cast alum. they have pipe fitters, industrial welders, etc... ill find out in a few days when my TMIC gets here.
- Fri Feb 03, 2012 2:20 am
- Forum: Parts Shed
- Topic: WTB TD04
- Replies: 5
- Views: 1138
WTB TD04
Hey guys, i got burnt on a td04 from a nasioc member but i got my money back. so now i need to find one asap. anyone on here have one? i need a low milage, no shaft play, no burning oil, not all dirty, oily, td04 turbo... id rather buy from someone on here since it seems to be a much tighter knit co...