Search found 35 matches

by snailslow
Wed Nov 09, 2011 6:32 pm
Forum: Turbo
Topic: Cheap FCD
Replies: 157
Views: 98184

Re: Cheap FCD

ive been using the 2way check valve and boosting 15lbs with no problems yet!
by snailslow
Mon Oct 31, 2011 5:31 pm
Forum: Engine
Topic: troubleshooting my 92 Legacy SS
Replies: 8
Views: 962

Re: troubleshooting my 92 Legacy SS

count the cells.. make sure the maf is plugged in, and that u dont have a boost leak.. that will cause that. and the comp should be around 150 or less.. mine was all around 140
by snailslow
Thu Oct 13, 2011 4:54 am
Forum: Suspension
Topic: 05 wrx non wagon srtuts and springs on 94 legacy gt wagon
Replies: 8
Views: 1302

Re: 05 wrx non wagon srtuts and springs on 94 legacy gt wago

i believe 02-03 wrx springs fit, as i had those on mine.. also any impreza springs/struts bolt in.. same with wrx struts up front, but the rears need one hole drilled and then they bolt in
by snailslow
Thu Oct 13, 2011 4:51 am
Forum: Intake
Topic: JECS MAF Install Q's
Replies: 19
Views: 3731

Re: JECS MAF Install Q's

i believe you splice the blue wire and ground it
by snailslow
Fri Sep 02, 2011 5:04 pm
Forum: Intercooling
Topic: Post your FMIC's!
Replies: 69
Views: 20971

Re: Post your FMIC's!

alot of people use way to big of intercoolers.. you loose boost and get way more lag.. plus it doesn't really help unless your pushing 400+hp with a big turbo on a hot day.. the top mount is proven to only loose 2% over a front mount
by snailslow
Thu Sep 01, 2011 5:09 pm
Forum: Picture and Multimedia Gallery
Topic: 1992 Touring Wagon
Replies: 27
Views: 5152

Re: 1992 Touring Wagon

cant wait till i can get mine going!
by snailslow
Sat Aug 27, 2011 5:18 pm
Forum: Engine
Topic: EJ22t coolant tank
Replies: 8
Views: 1100

Re: EJ22t coolant tank

mine broke off too, they all do that.. what i did was thread a bolt in with jb weld and the line that went into that, i just t-ed into the other one. have no problems at all.. i can take pics if you want
by snailslow
Fri Aug 26, 2011 5:45 pm
Forum: Intercooling
Topic: Please HELP 06 TMIC with vd04 1991 turbo
Replies: 10
Views: 3043

Re: Please HELP 06 TMIC with vd04 1991 turbo

i guess the vac set up was kinda all over the place lol mines alittle more simple.. i didn't look into it much, i just saw oil on the uppipe so i thought it was the rear cam seal like it was on mine.. i hope u figure it though
by snailslow
Thu Aug 25, 2011 11:52 pm
Forum: Intercooling
Topic: Please HELP 06 TMIC with vd04 1991 turbo
Replies: 10
Views: 3043

Re: Please HELP 06 TMIC with vd04 1991 turbo

and u dont need the boost syl hooked up either.. either way it will boost 8lbs.. nothing wrong with how it is
by snailslow
Thu Aug 25, 2011 11:51 pm
Forum: Intercooling
Topic: Please HELP 06 TMIC with vd04 1991 turbo
Replies: 10
Views: 3043

Re: Please HELP 06 TMIC with vd04 1991 turbo

as far as the spudder, it did that all bone stock.. i think its probably the ecu.. everything else has been tried
by snailslow
Thu Aug 18, 2011 6:08 pm
Forum: Engine
Topic: engine temp sensor
Replies: 4
Views: 856

Re: engine temp sensor

ok its the new sensor not reading right
by snailslow
Thu Aug 18, 2011 6:01 pm
Forum: Engine
Topic: engine temp sensor
Replies: 4
Views: 856

Re: engine temp sensor

its a standard products one.. they had a oem bousch? one but had a diff connecter on it. im gonna take this one back and try a diff brand.. i just tried a new connector and it still shows hot, so im letting it cool down so i can change it back to the stock on, im gonna run it and then touch the wire...
by snailslow
Thu Aug 18, 2011 5:48 pm
Forum: Picture and Multimedia Gallery
Topic: Gymkhana 4
Replies: 13
Views: 1919

Re: Gymkhana 4

took him many tries to get all that.. u can see all the marks.. so really, anyone can do that with enough trys.. give me a drift car and id knock that out with less trys
by snailslow
Thu Aug 18, 2011 4:41 am
Forum: Engine
Topic: engine temp sensor
Replies: 4
Views: 856

engine temp sensor

when i had my manifold out, the stock temp sending unit prong broke.. car ran at perfect temp.. so i drove a few days like that.. today i bought a new sensor, plug it in and it goes straight up to over heating.. if i turn the key off to to 2nd click, it sits perfect at middle where it should be.. an...
by snailslow
Tue Aug 16, 2011 5:07 pm
Forum: Intake
Topic: turbo inlet elbow
Replies: 18
Views: 5967

Re: turbo inlet elbow

they told me there was only a few left in diff states
by snailslow
Tue Aug 16, 2011 5:05 pm
Forum: Intercooling
Topic: 02 tmic install
Replies: 7
Views: 2956

Re: 02 tmic install

i might hook it up to the stock vf11 for now, but that turbo is dying i think from pushing it to hard lol i dont think it will fit with a td04, the elbo is pretty far off still im sure.. i might get a td04 for now, but i want to upgrade to a td05 16g later
by snailslow
Mon Aug 15, 2011 7:18 pm
Forum: Misc
Topic: fuel and boosting question
Replies: 3
Views: 904

Re: fuel and boosting question

ya im just doing my research and seeing whats cheaper.. upgrade the 22 or just get a ej20.. i plan on converting my wagon to 5sp, so that would come with the ej20 too
by snailslow
Mon Aug 15, 2011 5:32 pm
Forum: Misc
Topic: fuel and boosting question
Replies: 3
Views: 904

fuel and boosting question

having owning a few turbo cars.. 240's and a audi with gt30. i see people say if u upgrade to a vf39 u need bigger injectors? well the stock pinks should be good for 250whp right? my audi had under 300cc injectors on the 1.8t and i was pushing 14lbs on the gt30 and i was still in the low 11's air/fu...
by snailslow
Mon Aug 15, 2011 5:22 pm
Forum: Intercooling
Topic: 02 tmic install
Replies: 7
Views: 2956

Re: 02 tmic install

its a real tight fit.. the y pipe hits where the tranny mount is, so u have to either cut the top out or hit it down... i might trim the throttle body too bc that is really tight and i have no idea how a coupler is gonna go on lol i dont have one to try yet
by snailslow
Sun Aug 14, 2011 1:34 am
Forum: Intercooling
Topic: 02 tmic install
Replies: 7
Views: 2956

02 tmic install

well i picked this up for free and tested fitted to see what all i need to do.. fits snug! but i will get it goin soon

Image
by snailslow
Tue Aug 09, 2011 1:37 am
Forum: Intercooling
Topic: NW (Oregon) tmic install
Replies: 6
Views: 2579

Re: NW (Oregon) tmic install

now u need to post pics!
by snailslow
Sat Aug 06, 2011 7:48 pm
Forum: Intake
Topic: painted intake manifold
Replies: 4
Views: 1875

Re: painted intake manifold

sorry for the big pic.. next project is intercooler and intake set up. then turbo
by snailslow
Sat Aug 06, 2011 7:47 pm
Forum: Intake
Topic: painted intake manifold
Replies: 4
Views: 1875

Re: painted intake manifold

Image
by snailslow
Sat Aug 06, 2011 7:45 pm
Forum: Intake
Topic: painted intake manifold
Replies: 4
Views: 1875

painted intake manifold

i was bored yesterday, so i decided to pull the manifold and clean it and then paint it.. it was kinda a pain taking every little thing off, but 4 hours later it was done.. i used vht flame proof flat red with clear coat. came out decent i guess http://i1227.photobucket.com/albums/ee437/snailslow/IM...
by snailslow
Sun Jul 31, 2011 6:18 pm
Forum: Intercooling
Topic: NW (Oregon) tmic install
Replies: 6
Views: 2579

Re: NW (Oregon) tmic install

its easier to hook up with td04.. i moved my coolant tank to were my ac was, but you can also turn it sideways where its at now and that works