legacycentral bbs

I would recommend clearing the codes, drive the car, and then see what comes back. the coolant temp sensor (code 21) is a likely cause for your problems. It may be telling the ECU an incorrect temperature and the ECU is causing it to deliver more fuel, which could cause it to bog. Its actually code...

Does anyone now where i can get the back badges? The ones that say "turbo AWD" and "Subaru"

some better pictures of my new touring wagon

kimokalihi wrote:Yeah. Mines hooked up and I've run it with the hoses plugged, stock config and more recently vented with a filter to keep debris out and I honestly couldn't tell a difference between the three setups but I vote vented. Remove that canister mess from the bay.

So it's not needed?

Shouldn't the purge solenoid valve be plugged in? Or am I wrong. Its on my 1994 touring wagon. On my N/A its plugged in. Should it be plugged in the ej22t?

Legacy777 wrote:What about the other questions I asked? What model & year and have you checked for codes?

1994 legacy L fwd. I got the ecu codes today. They're : code 35 and code 21

My new turbo wagon. I got one good deal with this one. Couldn't let it pass by. I got it today, with 175xxx everything works great. Run great. Just needs a little work on the power steering problem. But for 900$ I don't care. http://i987.photobucket.com/albums/ae352/ExUriel/IMG_20130919_223353_zps6a...

darkhorse wrote:So did you build that grill or just buy it?

I made it. Took a while

Thanks guys

Legacy777 wrote:Can you please elaborate what you mean by getting very "heavy". Also, provide model and any other info about the car. Have you checked the ECU for codes?

It bogs out a lot

My engine gets very heavy when I try to step on it. If I press the pedal more then half way from a stop, it becomes very heavy and the revs go up very slowly. Anyone else have this problem?

Update on my legacy.
Full drop all around on 2002 impreza lowering springs.
White Supertones
Replica turbo grill
Foglights made from integra headlights
Plastidip wheels
Entire buff and polish on the paint.

How good are they? Is there any gain on getting NGKs. What part # of ngks are for our legacys?

Got a new dome light today. It gives me the same problem.

Hmmm Do you have a multi meter or test light? I would suggest checking the wiring with the multimeter. The black wire with white stripe should have 12v going to it. The black wire should be providing a ground when a door is open. You can check this by checking the resistance from the wire to a know...

Legacy777 wrote:Ok, then it's something with the wiring or how they were connected back together.

http://www.youtube.com/watch?v=5eZl9YO0 ... e=youtu.be

Legacy777 wrote:Ok, then it's something with the wiring or how they were connected back together.

Well I solder them back together excalty the same. I'm going to redo them tomorrow. I'll take a video if it still doesn't work so you can see.

Hmm....well since it happened after those two events, gauge cluster change out and the wiring getting cut, it's likely one of those two things. If you're absolutely 100% positive the wiring was reconnected properly, then it's likely something to do with the gauge cluster. I know there were some wir...

Are you sure you got the wires soldered back together properly? Do you still have the 92 cluster? Do the door indicator lights in the cluster work? If you open the driver's door, does it show that in the gauge cluster? Yeah still on there. Works fine. All doors indicators work, on all 4 doors it sh...

When I did my 6spd swap I had the gauge cluster out. With the gauge cluster out the dome light did not work with the doors. If your dome light works in the ON position, but not the doors, I would suspect the issue is related to the gauge cluster setup. Have you done anything with the gauge cluster ...

I know its been long since this post. But I still need help. My dome light still doesn't light up with my doors and its irritating me.

Danny-G wrote:The piaa ones I mentioned pretty much fill the entire fog light hole.

I can measure the lights if you would like.

Yes please

What's the best size. Is It like 3 inches? I want them to fit the whole hole. Not tiny little fogs.

CAV3MAN227 wrote:-Saw a white 91 SS, auto, around noonish time at U-Pull-&-Pay in north Denver today. Had a temp tag in back window and red STi stickers on the sides and trunk.

-Joe

He works there. I've gotten to talk to him, pretty chill guy. He's going to sell me a turbo.