legacycentral bbs

Thank you for the help, I really appreciate it! So I located the ecu and the terminal where the vss wire connects. From what I have researched the ecu only receives a signal if the transmission is in motion so I have to either have to drive the car on jacks or spin the cable manually correct? Also, ...

Indeed the CEL has returned for the vss 2. However, at first the CEL would only come on intermittently.

Okay, I cleared the codes like you said. However, while driving with both green and black cables connected the cell would flash 04(1,2,3,4, pause then repeat). The same thing would happen when I was driving with just the green connectors hooked up. After my d-check drive I disconnected the cables an...

I cleared the codes by removing the fuse for the ecu/tcu. I'll try the method you mentioned though. Thanks for the advice, I'll report backwith my findings.

Yeah the cruise hasn't worked since I bought the car, figured it was because the abs doesn't work. It does also idle and shift funny. So many problems to track down... Thanks for the replys though!

Thank you for your reply. Your posts have helped me tremendously. The speedometer works when the cable is plugged into the transmission yet the cel for code 33 persists, even after I cleared the codes. My thought is the actual sensor in the instrument cluster isn't working. However, will this disabl...

Hello, my 1990 legacy awd AT recently threw a code 33. I figured the cable to the transmission was bad so I pulled it and noticed the flathead piece would pull out. I thought this was the problem until I noticed my speedometer and odometer pagstopped working. When i plugged the cable back in it star...