legacycentral bbs

During this weekend we have successfully replaced the friction pack in the AT extension. Now my Legacy is back to the 4WD! It feels so good driving a 4WD car! I've also changed front differential oil and AT oil completely (with draining one liter at a time from the radiator pipe and filling the new ...

Here's a picture of my new MAF. The pin # 1 is missing.

http://imageshack.com/a/img716/1324/y0id.jpg

OK, thanks for the link. I'll try adjusting the idle switch tomorrow. And I'll try my best to order ECU on Monday. What about ignition coil and wires? Are they OK?

Today I took off entire PCV system in order to install new cooling liquid sensor. The lowest 807519082 hose was torn almost to the half of it, and as a fact the side of engine was covered with black oil. I was unable to find it in my town, and on the Internet this little piece of hose costs $8!!! So...

Is there something like ELM327 Bluetooth module that will be working with OBD-I interface of 92's Legacy? I want to be able to monitor sensors with Android software like Torque...

I changed MAF today. It had 4 contacts instead of 5... At first car was running great, was very stable at idling, and I even felt that it is responding better to the pedal. But after few minutes idling started flowing from 1100 to 600, it started to look like the engine is going to halt, when moving...

What was the engine rpm when you tested the MAF voltage? The engine was idle at 850rpm. Voltage was 1.26. At 2250rpm voltage was 1.80 Are you checking the resistance for the secondary coils where the resistance should be 13.8 kohms? Ignition Coil: Primary side: No.2 - No.1 - 1.5 Ohm No.2 - No.3 - 1...

OK I'll try to find myself aftermarket ECU, but how can I check that it's OK? In US you probably have thousands of them... How much do they cost in US?

I've found this list of ECUs for my car on japancats.ru (mine is outlined with red):


As I understand - 22611AA970 is for leaded fuel. It seems that I have to find myself 22611AA950?

Thanks a lot for your suggestions! I'm really so happy that I've found this BBS!

I have Carburator Cleaner and Brake Cleaner, which one will suit the best? Or I should get myself MAF cleaner?

Thanks a lot James614, I'll stay away from Iridiums, as they are expensive and ineffective. Is there any way to clean plugs? My new NGKs (3 of 4) are covered with black dust after two days of use. Only the spark plug of first cylinder is in normal shape, a little red-colored. I made an introduciton ...

We have only 92, 95 and 98 octane, and 95-G with some additions. The lowest is 92. We used to have 80 but it disappeared in the beginning of 2000's. The timing belt is properly aligned now. I actually haven't count how much fuel I'm spending after the belt alignment that I've done last week. The ECU...

Hello guys! Greetings form Russia!
What about NIPPONDENSO K20PR-U11 plugs? Some people say that they are better than NGK BKR6E-11... I even thought about installing BKR6EI-X11 ones... My engine is EJ22 and has 10 psi compression. What could you suggest?

Thank you!

Hello, fellow owners of amazing machines called Subaru Legacy! Please let me introduce myself, I'm a foreigner I live in Siberia, Russia. City called Barnaul. And I'm 27. I have a wife and 4 y.o daughter. I'm proud to be the owner of my first car which is Subaru Legacy BC2 of 1992. It's completely r...