Search found 19 matches

by susiemk
Mon Oct 17, 2016 4:16 pm
Forum: Parts Shed
Topic: BC Legacy Performance Parts - Intake, 16G, FMIC, Exhaust
Replies: 2
Views: 753

Re: BC Legacy Performance Parts - Intake, 16G, FMIC, Exhaust

Still here, make reasonable offers on these parts keeping in mind the cost of having parts custom fabricated / reworked to fit this unique car.
by susiemk
Wed Oct 12, 2016 7:08 pm
Forum: Parts Shed
Topic: 2004 Grey Leather Interior - Fits BC Legacy
Replies: 0
Views: 531

2004 Grey Leather Interior - Fits BC Legacy

I am selling the Grey Leather Interior from a 2004 Legacy Sedan I used in my 1994 LSS - Looking to Get $200 for the front/rear seats picked up from NYC.
by susiemk
Wed Oct 12, 2016 7:02 pm
Forum: Parts Shed
Topic: BC Legacy Performance Parts - Intake, 16G, FMIC, Exhaust
Replies: 2
Views: 753

BC Legacy Performance Parts - Intake, 16G, FMIC, Exhaust

I have the following parts from my LSS for sale: Modded Airbox 4-5" inlet / MRT style resonator delete set-up for EJ20G Intake / 90* inlet turbo, should fit ej22t intake as well - $90 FMIC - 31x12x3 core, 4 tubes / 6 connectors custom fit & welded for a BC Legacy w DOHC Engine flanged for a...
by susiemk
Tue Feb 09, 2016 6:00 am
Forum: Car Lot
Topic: NYC 94 Legacy SS EJ20G Swap, Fmic, 3" exhaust $2700
Replies: 3
Views: 2103

NYC 94 Legacy SS EJ20G Swap, Fmic, 3" exhaust $2700

Hello all, my previous user name was BXSS but I've been MIA long enough that it is now inactive but you may have read some of my previous posts. The legacy has been sitting around for a while so I think it's time to let it go. Car is a crimson red pearl 94 4eat / 118k on the clock with the following...
by susiemk
Thu Aug 27, 2015 2:11 am
Forum: Engine
Topic: Part number for 93 BC Legacy Ej20gn cam seals
Replies: 3
Views: 895

Part number for 93 BC Legacy Ej20gn cam seals

Are cam seals for a bc legacy era ej20g (2 bolt coils) the same as ej25d cam seals?
Does anyone have the part number for these cam seals?

Whats the Torque spec for cam bolts (all 4 cam gears are metal on this engine)??
by susiemk
Tue Jun 16, 2015 6:11 pm
Forum: Intercooling
Topic: 06-07 WRX tmic worth the install trouble?
Replies: 8
Views: 4047

Re: 06-07 WRX tmic worth the install trouble?

^Naaa, AWIC is really cool & allows for better charge cooling than is possible with an air to air intercooler but in an effort to keep everything as light & simple as possible I'm sticking with the hot air / meth injection setup on the ghetto-eco-boosted Forester L-t... To help keep underhoo...
by susiemk
Thu Jun 04, 2015 12:15 pm
Forum: Engine
Topic: EJ22T VS. EJ20G
Replies: 7
Views: 1364

Re: EJ22T VS. EJ20G

I've had both in a SS - the best of both worlds would be a dohc ej22t - 2.2l TQ & dohc top end = win win.
by susiemk
Wed Jun 03, 2015 1:12 pm
Forum: Turbo
Topic: VF11 Max HP?
Replies: 3
Views: 3408

Re: VF11 Max HP?

^Its possible to make pretty big gains at lower than stock boost levels by freeing up the exhaust / intake / cooler intake charge so while it may sound crazy - you never know... I actually gained 28 "GTHP" on my Gtech-PRO at 5psi with intake / TBE / IC vs the same SS's stock baseline @ 8.7...
by susiemk
Tue Jun 02, 2015 1:46 pm
Forum: Turbo
Topic: VF11 Max HP?
Replies: 3
Views: 3408

VF11 Max HP?

I apologize in advance for the very silly questions, but again I dumped my VF11 very quickly & went for a TD04 then TD05 on my SS (BXSS) Does anyone 1. Have an idea of the max crank HP the vF11 should produce without restrictions from the engine such as poor flowing heads? I'm guessing 220-250ch...
by susiemk
Tue Jun 02, 2015 1:35 pm
Forum: Engine
Topic: EJ22T rebuild to be dropped into Fozz
Replies: 13
Views: 1756

Re: EJ22T rebuild to be dropped into Fozz

but the one thing I definitely recommend is making sure you have local tuning support for the engine management you choose, regardless of what it is. http://bbs.legacycentral.org/viewtopic.php?f=25&t=47942 +10000 And if you're boosting your Foz, here's my '98 Build . BTW, there is nothing for t...
by susiemk
Tue Jun 02, 2015 1:09 pm
Forum: Turbo
Topic: VF11 reliability with increased boost....?...
Replies: 8
Views: 4051

Re: VF11 reliability with increased boost....?...

SILINC3R wrote:Why not just run a top mount? Meth is fun but if you run out you're done.
Thinking about an 06 WRX TMIC / GC8 Scoop on the bread box...

Naaa stock appearing is OK with me...
by susiemk
Tue Jun 02, 2015 1:00 pm
Forum: Intercooling
Topic: 06-07 WRX tmic worth the install trouble?
Replies: 8
Views: 4047

Re: 06-07 WRX tmic worth the install trouble?

Thanks for the response still weighing lthe sweat vs gain ratio.

A plus for the TMIC is that it should produce an HP gain @ my 5psi "ecoboost" setting which is too low to start injecting methanol.
by susiemk
Mon Jun 01, 2015 4:25 pm
Forum: Turbo
Topic: lack of power, slooow to boost- intermittent
Replies: 29
Views: 10029

Re: lack of power, slooow to boost- intermittent

It may sound pretty stupid but Do you have good Vacuum values (18-20 in park / N)? Is compression good on all cyl? Ive seen a never ending lean condition on a car with low compression on 1 cyl Have you checked the knock sensor for cracks in the plastic? This will give you false knock readings & ...
by susiemk
Sun May 31, 2015 9:59 pm
Forum: Intercooling
Topic: 06-07 WRX tmic worth the install trouble?
Replies: 8
Views: 4047

06-07 WRX tmic worth the install trouble?

I have a ej20g powered sf Forester currently running a little vf11 / lss charge pipe intercooled with methanol injection which runs good at 13-14psi. I have a couple 06-07 wrx tmics laying around one of which has a perrin silicon y pipe & I have a gc8 hood scoop laying around as well. I believe ...
by susiemk
Sat May 30, 2015 11:01 pm
Forum: Turbo
Topic: VF11 reliability with increased boost....?...
Replies: 8
Views: 4051

Re: VF11 reliability with increased boost....?...

Got the meth kit on & cranked the boost up - got about 13psi, 14 psi on shifts (4eat) no knock injecting wwfluid -20*... "Hi" boost power is up 62% over our ej251 el header/k&n/LW pulley 4eat sf forester. I'm happy with this performance so I won't vf10 (much bigger than a vf11), td...
by susiemk
Wed May 27, 2015 6:30 pm
Forum: Turbo
Topic: VF11 reliability with increased boost....?...
Replies: 8
Views: 4051

Re: VF11 reliability with increased boost....?...

I really wanted to keep the car 100% stock (grandma appearing) so I did not want to mount a scoop for the TMIC (have 2x06 WRx/FXT TMICs + a meth kit laying around). My turbo friends look underhood & think the car is nA which I find funny but there is no intercooler & its a ugly old forester ...
by susiemk
Wed May 27, 2015 1:04 pm
Forum: Turbo
Topic: VF11 reliability with increased boost....?...
Replies: 8
Views: 4051

Re: VF11 reliability with increased boost....?...

Wondering if the 10% smaller 2.0l engine would allow the VF11 to push out 10% more boost over the 12PSI ej22 max boost with similar efficiency...?... I'm currently testing boost limits of the EJ20G/VF11 hot air (looks like 8.5psi is the safe limit before detonation (had a hunch this was the limit fr...
by susiemk
Wed May 27, 2015 2:44 am
Forum: Turbo
Topic: VF11 reliability with increased boost....?...
Replies: 8
Views: 4051

Re: VF11 reliability with increased boost....?...

Good to hear. I've seen big turbos gt45 / s400 sized die soon after an overboost episode (takes a huge over boost to kill the s400s like 60-75psi), so its good to hear the tiny vf can take a little bit of extra boost with good reliability. I have a Forester 4eat running a ej20g with a teeny tiny lit...
by susiemk
Mon May 25, 2015 2:16 am
Forum: Turbo
Topic: VF11 reliability with increased boost....?...
Replies: 8
Views: 4051

VF11 reliability with increased boost....?...

Hey I'm BXSS username is sorta dead now I have a silly question regarding the reliability of the VF11 with boost levels over stock. I dumped my vf11 after just getting it up to 10 psi & had no issues with it But I know folks have run more than 10 psi for extended periods of time, if you have run...