Search found 193 matches
- Sat Apr 08, 2017 11:38 pm
- Forum: Engine
- Topic: ej22 to ej25d swap...not as easy as it looks
- Replies: 33
- Views: 5576
Re: ej22 to ej25d swap...not as easy as it looks
Ok The car runs better, but I think there is quite a bit left in it that I am not getting. The hard misfires and stumbling at mid throttle are gone. Solved the IAC code it through by hooking up a second iacv coil to the wiring harness and leaving the one on the manifold disconnected electrically. No...
- Sat Apr 08, 2017 8:51 pm
- Forum: Engine
- Topic: ej22 to ej25d swap...not as easy as it looks
- Replies: 33
- Views: 5576
Re: ej22 to ej25d swap...not as easy as it looks
Hi Josh, new MAF (one I had on hand) and IACV and new ECU are installed. Havent driven the car yet, but it appears we lucked out and got a manual transmission ECU. So no surgery needs to be done there. However, have a strange thing happening. With the car warmed up and idling I have a check engine l...
- Thu Apr 06, 2017 8:21 pm
- Forum: Engine
- Topic: ej22 to ej25d swap...not as easy as it looks
- Replies: 33
- Views: 5576
Re: ej22 to ej25d swap...not as easy as it looks
I noticed that you gave me two part numbers for those injectors is there any significant difference between thee aa140 and aa141? I have already received a new set of injectors of the aa140 part number so those should be totally compatible with your ECU and MAF. I so hope this works....
- Thu Apr 06, 2017 7:47 pm
- Forum: Engine
- Topic: ej22 to ej25d swap...not as easy as it looks
- Replies: 33
- Views: 5576
Re: ej22 to ej25d swap...not as easy as it looks
ok Josh PLEASE send me your ECU and maf. Swapping that out will be easier than changing injectors. And on top of that if it is just one pin that needs to be cut or connected, I can manage that I think. I am ready for things on this project to start going my way instead of murphys law way. How much d...
- Thu Apr 06, 2017 1:31 pm
- Forum: Engine
- Topic: ej22 to ej25d swap...not as easy as it looks
- Replies: 33
- Views: 5576
Re: ej22 to ej25d swap...not as easy as it looks
Regarding your post Josh, I do have the red top injectors as that is what was stock on the 98. I know I cannot swap fuel rails between the old 2.2 and 2.5 because spacing and bolt layout is wrong but not sure about putting the black top injectors from the 2.2 in the 2.5 rail. Dont know if they will ...
- Thu Apr 06, 2017 5:04 am
- Forum: Engine
- Topic: ej22 to ej25d swap...not as easy as it looks
- Replies: 33
- Views: 5576
Re: ej22 to ej25d swap...not as easy as it looks
Ok got good idle and good light throttle driveability. 1/2 to full throttle not so much. stumbles, misses erratically. If it were a steady miss I would suspect a plug or plug wire, but its totally random. Wonder the the stock fuel pump cant keep up with the red top injectors? Guess I got to get a pr...
- Wed Apr 05, 2017 4:04 pm
- Forum: Engine
- Topic: ej22 to ej25d swap...not as easy as it looks
- Replies: 33
- Views: 5576
Re: ej22 to ej25d swap...not as easy as it looks
Update to last nights post...I was truly impaired when I posted all of that. Call it celebratory or whatever you want. :) Just re-read some of what you were saying about making the ecu and iacv match and a question or two about all of that occured to me. As it stands I have the Hitachi ECU and the c...
- Wed Apr 05, 2017 5:52 am
- Forum: Engine
- Topic: ej22 to ej25d swap...not as easy as it looks
- Replies: 33
- Views: 5576
Re: ej22 to ej25d swap...not as easy as it looks
Hi Josh, just picked up a new set of red injectors, not installed yet. The engine is running now, on all four cylinders, I have some details to finish up before I declare the car anything like road ready. I drove it to town today and it didnt overheat, puke all its coolant or complain too much. Butt...
- Mon Apr 03, 2017 4:59 am
- Forum: Wheels, Tires and Brakes
- Topic: acceptable tire size range
- Replies: 31
- Views: 12779
Re: acceptable tire size range
Does anyone know if 205/55/16 on 16x7 +53 or 16x6.5 +55 would fit the 92-94 with stock suspensions from a GC RS without rubbing? I went through the fitment thread but didn't find one with this setup. Thanks for your inputs. I realize you might already know the answer to this one but they will fit b...
- Mon Apr 03, 2017 3:02 am
- Forum: Car Lot
- Topic: Ontario Canada - 1994 Legacy Turbo 5MT Sedan
- Replies: 11
- Views: 3817
Re: Ontario Canada - 1994 Legacy Turbo 5MT Sedan
WRXish wrote:I am most interested in this car. Please text me at your earliest convenience 1-434-907-6981 the name is Tom
IF the car is available I want it for the price we discussed
- Sun Apr 02, 2017 1:58 am
- Forum: Engine
- Topic: ej22 to ej25d swap...not as easy as it looks
- Replies: 33
- Views: 5576
Re: ej22 to ej25d swap...not as easy as it looks
Thanks Josh for the help you have offered with this situation. I discovered much to my chagrin that both the main wiring harness that connects to the ECU from the engine harness and the engine harness itself were both cooked. There is some good news in all of this as I dived into the arduous task of...
- Sat Apr 01, 2017 12:43 am
- Forum: Parts Shed
- Topic: Goode, VA - 91 legacy wiring harness needed
- Replies: 0
- Views: 560
Goode, VA - 91 legacy wiring harness needed
I need both the engine wiring harness and body harness it plugs into. Hopefully that will get me the Ecu wiring harness and connectors I need. If anyone has one these and is willing to part with them please send a message with your price. The need is both immediate and urgent
- Fri Mar 31, 2017 4:04 am
- Forum: Intake
- Topic: Anyone tried doing a manual IACV?
- Replies: 1
- Views: 2879
Anyone tried doing a manual IACV?
I am having issues with my idle speed and after partially disassembling an old one I had off of the 25D that I just rebuilt and put in the car, I thought that might be a solution to a fairly widespread problem. Buy a manual choke kit like people used to use on american carbureted engines and hook it...
- Fri Mar 31, 2017 3:56 am
- Forum: Parts Shed
- Topic: Goode, VA - Whiteline 22mm adjustable front bar
- Replies: 6
- Views: 1201
Re: Goode, VA - Whiteline 22mm adjustable front bar
yes the bar is still available, still in the box it was shipped to me in. text me 434-907-6981 and we can talk turkey
- Thu Mar 30, 2017 1:59 am
- Forum: Car Lot
- Topic: Nevada - SOLD: 91SS 5MT Robtune.
- Replies: 10
- Views: 4827
Re: FS: 91SS 5MT Robtune 22T daily - rust free Nevada
Hav3 you sold the car?
- Thu Mar 30, 2017 1:34 am
- Forum: Car Lot
- Topic: northeastern PA. - SS's and a TW for sale
- Replies: 25
- Views: 11062
Re: SS's and a TW for sale, northeastern PA.
Bart are any of these cars left that are manual as?
- Wed Mar 29, 2017 5:19 am
- Forum: Car Lot
- Topic: Ontario Canada - 1994 Legacy Turbo 5MT Sedan
- Replies: 11
- Views: 3817
Re: Ontario Canada - 1994 Legacy Turbo 5MT Sedan
I am most interested in this car. Please text me at your earliest convenience 1-434-907-6981 the name is Tom
- Wed Mar 29, 2017 4:43 am
- Forum: Engine
- Topic: ej22 to ej25d swap...not as easy as it looks
- Replies: 33
- Views: 5576
Re: ej22 to ej25d swap...not as easy as it looks
the wires affected were the black, black-white, white and one more I cant remember all connected at top end of the bottom connector on the ECU. Circuit board and conductors were cooked, wires vaporized, circuit board turned to charcoal over the area of about a dime. not what you want to do at all.
- Wed Mar 29, 2017 4:40 am
- Forum: Engine
- Topic: ej22 to ej25d swap...not as easy as it looks
- Replies: 33
- Views: 5576
Re: ej22 to ej25d swap...not as easy as it looks
Now that I have complied with the new security requirements I can actually log in...Apparently I have or had a missing ground that routed much of the current the engine uses through the ground path in the ECU nearly frying the wiring harness as well as smoking the ECU. Next step is to figure out if ...
- Wed Mar 29, 2017 1:22 am
- Forum: Engine
- Topic: ej22 to ej25d swap...not as easy as it looks
- Replies: 33
- Views: 5576
Re: ej22 to ej25d swap...not as easy as it looks
Without any of the diagnostic connectors connected does the CEL come on? With just the GREEN connectors connected do you hear relays cycling on/off? The ECU grounds itself through a spot on the back driver's of the intake manifold right around where it mates to the heads. Does the 2.5 manifold have...
- Wed Mar 29, 2017 1:08 am
- Forum: Electrical
- Topic: No CEL until I turn the key off
- Replies: 3
- Views: 660
Re: No CEL until I turn the key off
ok for reasons i cant fathom i cant seem to stay logged in when i go to the topic link u posted above, I did pull the ecu and it is totally fried. dont know why, but have to figure it out before plugging in a new one. I will do some tracing when i get back to the car. I am using the 2.2 wiring harne...
- Tue Mar 28, 2017 1:46 am
- Forum: Electrical
- Topic: ECU location, I cant find it
- Replies: 2
- Views: 584
Re: ECU location, I cant find it
thank you Mike, I would have never found it, the manual I have shows it on the the passenger side in the floor but of course I didnt find it there.
- Mon Mar 27, 2017 10:03 pm
- Forum: Electrical
- Topic: ECU location, I cant find it
- Replies: 2
- Views: 584
ECU location, I cant find it
Ok guys, where is the ECU hidden on the ist gen cars? I cant find it
- Mon Mar 27, 2017 10:00 pm
- Forum: Electrical
- Topic: No CEL until I turn the key off
- Replies: 3
- Views: 660
Re: No CEL until I turn the key off
Come on guys I really need help with this thing...HELPPPPP
- Sun Mar 26, 2017 4:13 pm
- Forum: Engine
- Topic: ej22 to ej25d swap...not as easy as it looks
- Replies: 33
- Views: 5576
Re: ej22 to ej25d swap...not as easy as it looks
many thanks to the suggestion for replacing the condenser with one from a 98. If it is still there, I will plan to go back to my local pic and pay tomorrow and snag that puppy and bring it home. Enough on the AC for now. main problem seems to be at this point two separate things that are I suspect r...