legacycentral bbs

Got some new wheels for her, and they match perfect. They’re A-Tech Final Speeds 16x7. I’m currently running some 205/55 but plan on going to a 215/55 to fill up the wheel well. Already ordered some Subaru centercaps that should fit, and some black lugs that’ll clean it up a lot. But I’d say they lo...

For this upgrade could I get away with 17 in. rims? And what’s the minimum offset required to get around them. Any advice would help thanks


Sent from my iPhone using Tapatalk

They do make 5x100 BBS wheels in silver. I have a set in gold. My old roommate had those style conversion spacers. It puts more strain on the wheel bearings, and he was/is replacing the bearings frequently. Thanks for the advice, if you’re ever looking to sell those wheels let me know ;) Sent from ...

Hey guy anybody running there adapters? I was looking into some BBS STi Silver Rims like these. https://www.ebay.com/i/202521617918?rt=nc&_trkparms=aid%3D222007%26algo%3DSIM.MBE%26ao%3D1%26asc%3D20161006002618%26meid%3Ddec54a972f834b86b002c9e492f4fbcd%26pid%3D100694%26rk%3D5%26rkt%3D29%26sd%3D36...

burnt_toast wrote:just ordered my exhaust! went with a budget route, with advice based on above. results and pics to follow as it comes in

Sorry to revive this dead thread but did this full exhaust work out?


Sent from my iPhone using Tapatalk

i wanna say the length might still be different along with the different hangers. that scenario im not sure of only because i had exhaust made for my car, it wasnt a complete kit. So if I were to do it, I’d probably just have take it to an exhaust shop and get them to piece it together Sent from my...

ride_child wrote:Chyea!! Anytime!!

If I were to get a full turbo back exhaust system for the 02 WRX do you think it’d all fit? I’d probably have to weld some new hangers and get that extension for the o2 sensor, but do you think that would work



Sent from my iPhone using Tapatalk

wait, pictures of what exactly? as far as the length, i just cut off a 3 or so inch section of piping and rewelded it back to the muffler. as far as the wedge i cut off to change the angle of the downpipe, that wasnt necessary to get it to fit, it fit great before that. im just ocd and had a tig se...

wait, pictures of what exactly? as far as the length, i just cut off a 3 or so inch section of piping and rewelded it back to the muffler. as far as the wedge i cut off to change the angle of the downpipe, that wasnt necessary to get it to fit, it fit great before that. im just ocd and had a tig se...

that will bolt on directly to the turbo and the transmission and exhaust. the differences are where the 02 sensor is, so you might need a longer lead to the sensor. also its a bit longer than the stock downpipe so if you are sticking with the stock exhaust, it will need to be shortened somewhere. i...

Does anybody know if this is a direct bolt on? Or will I need to weld on hangers. Any advice would help or if you have a down pipe that is a direct bolt on for our cars that’d be great, thanks. https://www.importimageracing.com/products/invidia-v2-bellmouth-catless-downpipe-subaru-wrx-sti-2002-2007?...

Legacy777 wrote:Just to be clear, is the engine radiator you're looking for or the AWIC radiator?

If it's the engine radiator I will move this to the engine forum.

Thanks

I’m looking for the engine radiator, feel free to move it!


Sent from my iPhone using Tapatalk

The ej20g radiator in your legacy is interchangeable with an ej22t radiator (all years) as well as version 1&2 WRX/STI. You'll need to reuse your fans and that coolant tube that runs along the upper portion, no matter which radiator you end up using. That’s helps a lot, thanks mike, found a mis...

carfreak85 wrote:Location?

Houston TX


Sent from my iPhone using Tapatalk

Anybody have a radiator for an EJ20G not sure if it matters but it’s AWIC. Mine cracked and I need a replacement ASAP. Or if anyone knows of any aftermarket one that will fit that’d be perfect aswell. Thanks guys


Sent from my iPhone using Tapatalk

mike-tracy wrote:They measure all the injectors at a lower PSI over there. So their 380cc graytops come out to 440cc injectors using our testing.

Same thing with the ej20k yellow tops, those measure out to 440cc there, and 480cc here.

Interesting, thanks for that info


Sent from my iPhone using Tapatalk

i ran a z4 on a 91 ss... i had a td05 and 440 injectors. what do you need to know? Like Mike was saying about the AWIC pump, does the ECU still work with the AWIC? Also I believe my injectors are the 380cc grey tops, but if someone could confirm that for me that’d be nice Sent from my iPhone using ...

You might want to ask on dirtyolbc or the liberty rs forums for any specific Q's. I have ran the z4 ecu on a full ej20g before I got my robtune, ran great with the USDM boost control solenoid and sensors. I was running the td05 & gray 440cc injectors that the ecu is looking for. Mines an AWIC e...

Anybody running the Z4 on the 92 GT? Also I was wonder what the stock ecu on the GTs were, from the research I’ve dont it’s the H7 but I could be wrong. Thanks guys


Sent from my iPhone using Tapatalk

Chrck your pm, I’d love to buy it


Sent from my iPhone using Tapatalk

Legacy777 wrote:I don't live far from Gillman so even if I don't make it we could try and meet up.

Sounds good


Sent from my iPhone using Tapatalk

I've gone in the past, but didn't go last year. It's gotten WAYY too crowded. It's interesting they moved the date to Sunday instead of Saturday. I'm not sure whether I'll be able to go this year or not. Well if you do make sure to let me know, I’d love to meet up and see another first gen Sent fro...

mike-tracy wrote:Man David Higgins gets around. He was at Idaho rally 2 weekends ago, and Tour de Forest near Olympia WA next weekend, Texas the following weekend

Busy man [emoji23]


Sent from my iPhone using Tapatalk

Anyone in the Houston area going, or planning to go? Only $10 to get in, and if love to see some other 1st gens there. I’ll include the link on here.

https://www.eventbrite.com/e/gillman-su ... 7893389417


Sent from my iPhone using Tapatalk

yea, the early 90* inlet td04 is a direct swap for your td05. AND it would definitely outspool both your old vf10 and td05. going up now... http://gallery.legacycentral.org/d/13521-2/DSCF1978.JPG http://gallery.legacycentral.org/d/13525-2/DSCF1979.JPG http://gallery.legacycentral.org/d/13528-2/DSCF...