legacycentral bbs

pics will help your case.

Good thing for old school non interference engines. If you had a newer engine in there interference, you would likely be pulling heads and spending money to fix the belt issue.

I like old scoobies that are non interference.

ive made mods to the rails of the 08+ seats to bolt them into the older cars, they fit perfect afterwards and it wasnt that hard here is mine just had to slot the outer hole front. and drill a new hole for rear inner. and make a small bracket for rear outer. comfy http://i405.photobucket.com/albums...

the rear bumper on a 94 GT wagon is different, it has the bottom lip.

yeah get it soon. Too many people fix the rust, sand, then primer and leave it in primer. If you get to primer stage, then you need to topcoat with paint asap. paint seals it. primer does not.

if you go the "find another shell route, I ill gladly buy that rusty shell. I got a rusty one here and need better shell and that one is pristine to me.

I have 02 WRx seats in my 85 subaru hatchie, and they are about right with the driver in lowest position. anything raised and it is too high, i am 6ft tall.

save your money no need to buy straight edge, you need to just spend your money on some Subaru OEM HG's..
and be done.

you are not really listening to those who are saying only go with OEM.

use stock hg x 10000000

hope you don't plan keep it long, rust is cancer.

mkay, WHY did you buy a northeast rusted car, when you can find them rustfree where you live. even the price if it is cheaper is not worth the extra cost of rust and stuck bolts, borken bolts, etc on normal repairs......... I do not get it. WHY. http://i1082.photobucket.com/albums/j376/tomw5/Brat%20...

I would buy carpeted mats if you ship.

I heard the LED don't last due to they do not have resisters, and they are not designed for 12v they need resistors to drop voltage way down. How long have you had them?

They will burn out shortly.

pm me price on the 3 wheels, if you have 4 then on 4, but i only need 3.

i do think it is real.

Boughta car, don't care for the shift knob, so it must be sold. here are 2 pics, of it in my Subaru hatchback http://i405.photobucket.com/albums/pp132/bheinen74/hatchie%2085/DSCF0005.jpg?t=1323803399 http://i405.photobucket.com/albums/pp132/bheinen74/hatchie%2085/DSCF0004.jpg?t=1323803400 10 bucks p...

have pm'd the paypal info to both of the above.

I take paypal and ship priority USPS mail ..

shawn ??

they are not OEM subaru, but I am using them and they are no issue. These are brand new. Updated white connector, ready to replace your old and guaranteed to be cracked sensor. buy this new from me, and your gas bill will go down if yours was cracked.\ I do not know who made these but they are brand...

look for a chimney.

only tip is spray spray spray the retaining ring with penantrant, pb blaster, etc, they are kinda hard to work loose. Since they are alumimium, the little tabs/fins on them crack off easily. take it slow, with a dowel tpy epunch and hammer lightly til they work loose. They are fine threads.

I have brand new knock sensors, selling them for 24.50 shipped (US zip, would be extra for Canada ship)

I have 7 in stock now ready to go out priority mail.

bump the want list is down to :
rear badge
right side AC/heat vent.

I have set of 205/60R15 hakka4's on my 94SS, and am putting some 185/65/15 winterforces on my 94LGT.