A vacuum hose reference for EJ22Ts

Snorkus, filters, throttle bodies and intake manifolds.

Moderators: Helpinators, Moderators

94Turbro
In Neutral
Posts: 23
Joined: Sun Mar 03, 2013 12:55 am
Location: Denver, Colorado

Re: A vacuum hose reference for EJ22Ts

Post by 94Turbro »

Can anybody tell me what size hose is used for #4 on the PCV system?
1994 Legacy SS: TD04, FMIC, Daily baby hauler/ Hoon cart.

Legacy777
Site Admin
Site Admin
Posts: 27618
Joined: Tue Oct 15, 2002 11:37 am
Location: Houston, Tx
Contact:

Re: A vacuum hose reference for EJ22Ts

Post by Legacy777 »

I'm assuming you're referring to #4 on this diagram?
http://www.surrealmirage.com/vrg3/vacuum/ej22t_pcv.gif

If so, the closest size is going to be 3/4".
Josh

surrealmirage.com/subaru
1990 Legacy (AWD, 6MT, & EJ22T Swap)
2020 Outback Limted XT

If you need to get a hold of me please email me rather then pm

94Turbro
In Neutral
Posts: 23
Joined: Sun Mar 03, 2013 12:55 am
Location: Denver, Colorado

Re: A vacuum hose reference for EJ22Ts

Post by 94Turbro »

Thanks Josh, you the man as always.
1994 Legacy SS: TD04, FMIC, Daily baby hauler/ Hoon cart.

94Turbro
In Neutral
Posts: 23
Joined: Sun Mar 03, 2013 12:55 am
Location: Denver, Colorado

Re: A vacuum hose reference for EJ22Ts

Post by 94Turbro »

Are the number #8 #9 #10 #11 and #15 hoses in this diagram (http://www.surrealmirage.com/vrg3/vacuum/ej22t_pcv.gif) 1/2"?
1994 Legacy SS: TD04, FMIC, Daily baby hauler/ Hoon cart.

Legacy777
Site Admin
Site Admin
Posts: 27618
Joined: Tue Oct 15, 2002 11:37 am
Location: Houston, Tx
Contact:

Re: A vacuum hose reference for EJ22Ts

Post by Legacy777 »

I'd have to double check on those, I'm not 100% sure.
Josh

surrealmirage.com/subaru
1990 Legacy (AWD, 6MT, & EJ22T Swap)
2020 Outback Limted XT

If you need to get a hold of me please email me rather then pm

cj91legss
Fifth Gear
Posts: 6312
Joined: Fri Jun 20, 2008 8:17 am
Location: Lakewood, Wa 98439
Contact:

Re: A vacuum hose reference for EJ22Ts

Post by cj91legss »

I think they are.

Sent from my SGH-T989 using Tapatalk 2
91 L-TW Wagon with a full Swap -RIP
92 SS Prefaced, GD dash swapped, 22T/205 Hybrid 20 psi - BEAST!
93 SS Bone Stock Gone!
94 TW Bone Stock Gone!
91 SS 4EAT Sold!
98 LGT 4EAT
98 LGT Wagon 4EAT

208ss
First Gear
Posts: 99
Joined: Wed Jan 01, 2014 7:04 pm
Location: boise. id

Re: A vacuum hose reference for EJ22Ts

Post by 208ss »

What size hose is #4 on pcv system and does it go to the rear port or iac
1991 subaru legacy sport sedan

just-rust
First Gear
Posts: 230
Joined: Thu Dec 26, 2013 4:22 pm
Location: Minnesnowda

Re: A vacuum hose reference for EJ22Ts

Post by just-rust »

Check this out 208 -
Legacy777 wrote:I'm assuming you're referring to #4 on this diagram?
http://www.surrealmirage.com/vrg3/vacuum/ej22t_pcv.gif

If so, the closest size is going to be 3/4".
Rusty 1991 EJ22T - VF28 - '07 wrx TMIC - MBC - Invidia DP - Walbro 255 SOLD
1992 Legacy SS 5mt, with some neat stuff on it

Soobster
First Gear
Posts: 119
Joined: Thu Feb 10, 2005 8:48 pm
Location: Portland, OR

Re: A vacuum hose reference for EJ22Ts

Post by Soobster »

Does anyone know if the September 8th 2004 version of the EJ22T Vacuum Hoses diagram is the most recent? Earlier in the thread, vrg3 mentions making updates a few times?
1987 VW Westfalia Vanagon - EJ22T Powered
1994 Legacy Touring Wagon

Legacy777
Site Admin
Site Admin
Posts: 27618
Joined: Tue Oct 15, 2002 11:37 am
Location: Houston, Tx
Contact:

Re: A vacuum hose reference for EJ22Ts

Post by Legacy777 »

What's on the site http://www.surrealmirage.com/vrg3/vacuum is correct.
Josh

surrealmirage.com/subaru
1990 Legacy (AWD, 6MT, & EJ22T Swap)
2020 Outback Limted XT

If you need to get a hold of me please email me rather then pm

Soobster
First Gear
Posts: 119
Joined: Thu Feb 10, 2005 8:48 pm
Location: Portland, OR

Re: A vacuum hose reference for EJ22Ts

Post by Soobster »

For replacing the 5.5mm vacuum hose with aftermarket silicon hose, would you guys recommend using 5mm or 6mm? It does not look like 5.5mm is an available size. Same for the 7.5mm. Better to go slightly over or under?
1987 VW Westfalia Vanagon - EJ22T Powered
1994 Legacy Touring Wagon

cj91legss
Fifth Gear
Posts: 6312
Joined: Fri Jun 20, 2008 8:17 am
Location: Lakewood, Wa 98439
Contact:

Re: A vacuum hose reference for EJ22Ts

Post by cj91legss »

I would recommend 5mm. It'd be a little bit more snug.
91 L-TW Wagon with a full Swap -RIP
92 SS Prefaced, GD dash swapped, 22T/205 Hybrid 20 psi - BEAST!
93 SS Bone Stock Gone!
94 TW Bone Stock Gone!
91 SS 4EAT Sold!
98 LGT 4EAT
98 LGT Wagon 4EAT

Soobster
First Gear
Posts: 119
Joined: Thu Feb 10, 2005 8:48 pm
Location: Portland, OR

Re: A vacuum hose reference for EJ22Ts

Post by Soobster »

Any recommendations on a brand/vendor for silicon vacuum hose? I guess they are not all created equal. Platinum curing, thin wall vs. thick wall...hard to know what's real and and what's real BS.
1987 VW Westfalia Vanagon - EJ22T Powered
1994 Legacy Touring Wagon

cj91legss
Fifth Gear
Posts: 6312
Joined: Fri Jun 20, 2008 8:17 am
Location: Lakewood, Wa 98439
Contact:

Re: A vacuum hose reference for EJ22Ts

Post by cj91legss »

I've gotten quality stuff from silliconeintakes.com
91 L-TW Wagon with a full Swap -RIP
92 SS Prefaced, GD dash swapped, 22T/205 Hybrid 20 psi - BEAST!
93 SS Bone Stock Gone!
94 TW Bone Stock Gone!
91 SS 4EAT Sold!
98 LGT 4EAT
98 LGT Wagon 4EAT

Bobsaget
In Neutral
Posts: 12
Joined: Wed Feb 25, 2015 10:35 pm
Location: Vancouver, WA

Re: A vacuum hose reference for EJ22Ts

Post by Bobsaget »

This is a very helpful thread! Thank you guys for all the information!

Post Reply