Page 1 of 1

Need O-ring Part #

Posted: Tue Apr 26, 2011 12:38 am
by Florin1
I think i have pinched a couple o-rings on my 05 Sti sidefeed injectors. Does anybody have the part numbers? I' like to replace the upper, middle and lower o-rings.
I checked out opposedforces.com but couldn't locate them. I called my dealer, but the guy seemed like he was lost and said he can only find o-rings from rail to fuel line, and that I'll have to buy the whole injector. :roll:

Re: Need O-ring Part #

Posted: Tue Apr 26, 2011 1:17 am
by kimokalihi
Ask witchhunter they probably know. They gave me all new O rings when I had my yellowtops cleaned and flow tested.

Re: Need O-ring Part #

Posted: Tue Apr 26, 2011 8:25 am
by Florin1
How much did that cost you? I'm thinking about doing the same thing but I fear its gonna be spendy.

Re: Need O-ring Part #

Posted: Tue Apr 26, 2011 8:49 am
by kimokalihi
It's $20 per injector and comes with all new O rings. That's flow testing, then cleaning, then flow testing again. $10 flat rate for shipping.

http://witchhunter.com/

Re: Need O-ring Part #

Posted: Wed Apr 27, 2011 7:29 am
by TurnNburn
wow thats pretty cheap. Just checked out there site and they have tons of neat info on there. Plus they can mod some models of stock injectors to flow over 800cc for like nothing compared to buying new injectors and their o rings ie. 25-50 bucks a piece. Which is pretty cool if you have engine managment. I dont, but its still cool.

Re: Need O-ring Part #

Posted: Wed Apr 27, 2011 8:27 am
by kimokalihi
You can get 800cc injectors for $300 a set new I believe so I wouldn't mod mine.

Re: Need O-ring Part #

Posted: Wed Apr 27, 2011 3:09 pm
by wtdash
Contact Jamie - sales@subarugenuineparts.com - @ subarugenuineparts.com. She can bring up the injector and O-rings and send you a pic to choose what you need.

I also 2nd using Witchhunter.

TD

Re: Need O-ring Part #

Posted: Thu Apr 28, 2011 8:04 am
by Florin1
After going to subaru, they sent me to carb connection which sent me to napa which finally sent me to Tony @ kirkland transmission/Dr. Injector in kirkland where I finally found them. Got the uppers and lowers for $21. For anybody looking at this thread in the future.

Re: Need O-ring Part #

Posted: Thu Apr 28, 2011 5:50 pm
by Legacy777
wtdash wrote:Contact Jamie - sales@subarugenuineparts.com - @ subarugenuineparts.com. She can bring up the injector and O-rings and send you a pic to choose what you need.
TD

Just an FYI, Jamie has left Chaplins/Subarugenuineparts to work for the marketing company behind DirtFish.

You can still order parts through there. I got some the other day, so we'll see how the new person handles things...

Re: Need O-ring Part #

Posted: Thu Aug 23, 2018 3:57 pm
by carfreak85
Legacy777 wrote:
wtdash wrote:Contact Jamie - sales@subarugenuineparts.com - @ subarugenuineparts.com. She can bring up the injector and O-rings and send you a pic to choose what you need.
TD

Just an FYI, Jamie has left Chaplins/Subarugenuineparts to work for the marketing company behind DirtFish.

You can still order parts through there. I got some the other day, so we'll see how the new person handles things...
Jaime is back at Michael's(Chaplin's)/SubaruGenuineParts, FYI.