turbo inlet elbow

snailslow · Post by **snailslow** » Sun Jul 10, 2011 10:28 pm

ive been having lots of problems with hoses n crap on my wagon! lol got most of it fixed, but recently ive been having a spudder/ boost cut.. so i find a few broken things. fix it and a few days later its back.. this elbow has been to hell and back.. i tried jb weld, which broke off, silicone which didn't work well and now im going to try polyurethne(sp) until i can make a metal new intake.. idk how to upload pics on here, but i will figure it out when i can

Post by **Legacy777** » Fri Jul 15, 2011 5:21 pm

Welcome to the BBS.

You're really better off trying to find a new one or a better shaped used one at a junkyard or from someone on the board. There is a silocone one that Samco makes that is nice, but not too cheap.

As for pictures, you need to have them hosted on a server, something like image shack, photobucket, etc.

snailslow · Post by **snailslow** » Sat Jul 16, 2011 7:24 pm

i gotta remember my photobucket lol but ya i saw they cost alot, so i just did this for now.. im gonna have a welder soon, so im going to make a whole new intake and elbow

darkcrave · Post by **darkcrave** » Sat Jul 16, 2011 9:39 pm

Duct tape worked for me no problems

snailslow · Post by **snailslow** » Sun Jul 17, 2011 5:30 pm

jb weld didnt hold at all.. this part is f'd!

BoostedSubie · Post by **BoostedSubie** » Sun Jul 17, 2011 5:35 pm

I work at a Spalding auto parts in spokane,wa. We have one sitting out in the yard right now. I don't think it would be too much.

snailslow · Post by **snailslow** » Sun Jul 17, 2011 5:47 pm

i think im gonna wait and just build a new set up.. its holding fine for now.. but thanks!

DevC · Post by **DevC** » Fri Jul 29, 2011 6:29 am

They are reasonably priced and available brand new through the dealer

subie is a monster · Post by **subie is a monster** » Tue Aug 16, 2011 6:39 am

i was at the subaru dealership today and they said it is no longer in production

snailslow · Post by **snailslow** » Tue Aug 16, 2011 5:07 pm

they told me there was only a few left in diff states

Subi-swap94 · Post by **Subi-swap94** » Tue Oct 04, 2011 1:42 am

i have the exact same issue and i dont know what to get, im sick of dealing with the broken one.
what do you guys think would be a good fit?

i talked to the subaru dealership also and they told me it wasnt available.

Subi-swap94 · Post by **Subi-swap94** » Tue Nov 08, 2011 1:48 am

think this'll work?

http://www.carid.com/1994-subaru-legacy ... 85891.html

Post by **Legacy777** » Tue Nov 08, 2011 6:53 pm

Do you have a turbo or non-turbo motor?

It looks like it would physically fit the non-turbo setup with the addition of a MAF adapter plate, but I'd recommend keeping your stock airbox and removing the snorkel in the fender.

Subi-swap94 · Post by **Subi-swap94** » Sat Nov 12, 2011 12:10 am

turbo

Post by **Legacy777** » Sun Nov 13, 2011 6:43 pm

No, I don't believe it will work.

subie is a monster · Post by **subie is a monster** » Wed Oct 03, 2012 1:53 am

then a custom intake?

oldscoobyturbo · Post by **oldscoobyturbo** » Sat Oct 06, 2012 11:33 pm

I can get the these elbows no problem pm me

subaRat · Post by **subaRat** » Fri Oct 19, 2012 9:30 pm

"Secrete Weapon Air" sounds like military grade lingerie for your car.

diesel devil, what kind of handle to you have on these elbows? Factory made?

oldscoobyturbo · Post by **oldscoobyturbo** » Fri Oct 19, 2012 10:24 pm

they are oem parts from subaru. i'll order 2 more on saturday

legacycentral bbs

A forum for 89-94 BC-BF(BJ) Legacy Owners and Fans

turbo inlet elbow

turbo inlet elbow

Re: turbo inlet elbow

Re: turbo inlet elbow

Re: turbo inlet elbow

Re: turbo inlet elbow

Re: turbo inlet elbow

Re: turbo inlet elbow

Re: turbo inlet elbow

Re: turbo inlet elbow

Re: turbo inlet elbow

Re: turbo inlet elbow

Re: turbo inlet elbow

Re: turbo inlet elbow

Re: turbo inlet elbow

Re: turbo inlet elbow

Re: turbo inlet elbow

Re: turbo inlet elbow

Re: turbo inlet elbow

Re: turbo inlet elbow