Anyone know where I can get this part by itself? Its part of the Apexi Power intake for '93-'96 JDM STi. I don't want to pay for the whole intake since I just need something like this piece, been looking everywhere but to no avail.
Apexi intake parts
Moderators: Helpinators, Moderators
-
- First Gear
- Posts: 153
- Joined: Tue Feb 28, 2012 6:36 pm
- Location: Seattle, WA
Apexi intake parts
'93 Stroker T-Leg - Weisco forged internals, 440cc gray tops, VF39, '06 TMIC, EJ20G heads & intake manifold, EJ25 phase 1 crank, JDM STi 5-speed mated to 4.11 lsd rear end
-
- First Gear
- Posts: 153
- Joined: Tue Feb 28, 2012 6:36 pm
- Location: Seattle, WA
Re: Apexi intake parts
Also, it doesn't have to be that exact apexi part, or an apexi part at all. Just something similar.
'93 Stroker T-Leg - Weisco forged internals, 440cc gray tops, VF39, '06 TMIC, EJ20G heads & intake manifold, EJ25 phase 1 crank, JDM STi 5-speed mated to 4.11 lsd rear end
Re: Apexi intake parts
this is a good write up for the intakes on our cars and pretty cheep too.
http://bbs.legacycentral.org/viewtopic.php?f=1&t=49555
http://bbs.legacycentral.org/viewtopic.php?f=1&t=49555
90 legacy Wagon LS Special, JDM closed deck 20g, custom 25d heads f/ metic motors, APS GC FMIC, 740cc, VF34, 4.11 F/D, Turboxs RFL blow off valve, now with piggyback.
94 Legacy SS R.I.P (parts car now for 90)
97 Legacy Outback (sold)
94 Legacy SS R.I.P (parts car now for 90)
97 Legacy Outback (sold)
Re: Apexi intake parts
I searched everywhere for this part months ago with now luck. I know HKS made the exact same part, CAV3MAN has one on his 92ss. I gave up the search and made a stainless mug mod kind of like the link above except. It's the first time I've made one so better and more profession grade versions will be made in the future.
-
- First Gear
- Posts: 153
- Joined: Tue Feb 28, 2012 6:36 pm
- Location: Seattle, WA
Re: Apexi intake parts
Yeah i have a hack job coffee can right now, looking for something a little more professional looking lol
'93 Stroker T-Leg - Weisco forged internals, 440cc gray tops, VF39, '06 TMIC, EJ20G heads & intake manifold, EJ25 phase 1 crank, JDM STi 5-speed mated to 4.11 lsd rear end
Re: Apexi intake parts
The "whole" Apexi kit consists of that part, plus the cone filter which is a consumable item anyways. There's a couple of small bracket pieces that aren't even needed to make it work that could be fabbed from the hardware isle at Lowe's. So you won't save much of any money looking for just that one part, it alone is 95% of the Apexi intake, lol.
93 Touring Wagon (EJ20G 5spd Swap) -- Finally back and running strong as ever!
05 Outback 2.5XT 5spd -- Now the wife can have her SUV and get in on the turbo Legacy goodness at the same time.
05 Outback 2.5XT 5spd -- Now the wife can have her SUV and get in on the turbo Legacy goodness at the same time.