Intake Tube

Snorkus, filters, throttle bodies and intake manifolds.

Moderators: Helpinators, Moderators

Post Reply
imtb
First Gear
Posts: 51
Joined: Sat Jan 17, 2015 3:04 pm

Intake Tube

Post by imtb »

Here is been my latest project. I picked up an extra intake tube and cut off the end to eliminate the curve. Not much differnce, jury still out. You call also see the heat sheild I made under the intake filter. It was sucking up hot exhaust and the sheild work very good. Just need to finish the other side to cover muffler. The cavity where the air filter is going has a fresh air snorkel going up the side of the van.
Revised. Kind of straight wantted a nice curve.
Image
Orginal

Image
Legacy777
Site Admin
Site Admin
Posts: 27884
Joined: Tue Oct 15, 2002 11:37 am
Location: Houston, Tx
Contact:

Re: Intake Tube

Post by Legacy777 »

Looks good. Did it make any difference in how the engine ran?
Josh

surrealmirage.com/subaru
1990 Legacy (AWD, 6MT, & EJ22T Swap)
2020 Outback Limted XT

If you need to get a hold of me please email me rather then pm
Post Reply