Stock intake with td04?

Snorkus, filters, throttle bodies and intake manifolds.

Moderators: Helpinators, Moderators

Post Reply
YetiSmasher
First Gear
Posts: 112
Joined: Wed Nov 12, 2014 6:55 am
Location: Portland, OR

Stock intake with td04?

Post by YetiSmasher »

Can I use the factory intake set up with a td04? Thinking about doing the swap soon.
mike-tracy
Moderator
Moderator
Posts: 5000
Joined: Tue Aug 25, 2009 7:52 am
Location: Des Moines, Wa

Re: Stock intake with td04?

Post by mike-tracy »

I've seen people buy silicone elbows in the appropriate sizes to make it work. Most use the opportunity to upgrade to a tmic, however.
1992 Legacy SS 5mt, build in progress
Josh Colombo wrote: Mon Jan 14, 2002 10:23 am Wait....I'm confused now.
robertpaige
Fourth Gear
Posts: 1232
Joined: Tue Jul 31, 2012 10:32 pm
Location: Portland, Oregon.

Re: Stock intake with td04?

Post by robertpaige »

Yes, you will need to buy a 90 degree silicone elbow that 2.25" in size, then cut a piece of pipe so that you can clamp the new inlet to the turbo elbow.
the guy who had the really low winestone SS on the corvette wheels
YetiSmasher
First Gear
Posts: 112
Joined: Wed Nov 12, 2014 6:55 am
Location: Portland, OR

Re: Stock intake with td04?

Post by YetiSmasher »

I currently have an 06 tmic plummet up to my vf11. I understand I have yo reroute the my plumming to the outlet as well. Shouldn't be that hard. As for as the outlet, I just need the 90' elbow and a piece of pipe yo connect to the stock air box?
Post Reply